Table of Contents
Advertisement
Available languages
Available languages
Application on Metals
When applying the tool on metals, make sure
that a residual-current device (RCD) is inserted to
prevent danger from metal chips.
If the RCD causes power disconnection, have the
tool sent to an authorized Black & Decker dealer
for repair.
Warning! Under extreme working
conditions, conductive dust and grit may
accumulate on the housing interior when
handling metal workpieces. This could
create an electric shock hazard as it
weakens the protective insulation in the
grinder.
To avoid accumulation of metal chips in the
interior of the grinder, we recommend cleaning the
ventilation ducts daily. Refer to Maintenance.
Using Grinding Wheels
Warning! Metal powder accumulates.
Excessive use of the grinding wheel on
metals may increase the risk of electric
shock. To reduce the risk, insert the RCD
before use and clean the ventilation ducts
daily. Follow the maintenance instructions
below to blow dry compressed air into the
ventilation ducts.
Maintenance
Black & Decker power tools have been designed
to operate over a long period of time with minimal
maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! To minimize the danger of
serious personal injury, please switch
off the tool power and disconnect all
plugs before adjusting or removing/
installing any accessory. Before
reassembling the tool, press and release
the trigger switch to make sure the tool is
already switched off.
Lubrication
This power tool does not require separate
lubrication.
Cleaning
Warning! Once visible dust accumulates
on the ventilation ducts and the
surrounding, immediately use dry air
to blow away dust and grit out of the
interior of the housing. You need to wear
approved eye and facial protective gear
when performing this process.
Warning! Never use solvents or harsh
chemicals to clean non-metal parts of the
tool. These chemicals may weaken the
material of the parts. Use only mild soap
and damp cloth to clean the tool. Never
let any liquid get inside the tool; never
immerse any part of the tool into liquid.
Accessories
Warning! Excluding accessories
provided by Black & Decker, all other
accessories have not been tested
for product compatibility. Using such
accessories together with this tool may
cause safety hazards. To minimize the
risk of personal injury, we recommend
you to use only Black & Decker
accessories with this product.
Please inquire at your dealer for more information
regarding suitable accessories.
Technical Data
Input power
No-load speed/rated speed
Wheel diameter
Grinding wheel thickness
Type of wheel
Spindle diameter
Weight
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
ENGLISH
BPGS8100 BPGS8115
W
850
850
min
11,000
11,000
-1
mm
100
115
mm
6
6
16
16
M10
M14
kg
2.2
2.2
11
Advertisement
Table of Contents
