Playback; Project/Session Selection; Setting Input Monitoring; Setting The Online Function - Tascam HS-4000 Owner's Manual

Playback

Project/session selection

1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the e button next to the project that you want to
play to open the session selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it.
3. Touch a session name button to select that session.
4. Touch the MENU button to open a pull-up menu and touch
the LOAD button.
The "Load selected Session?" pop-up appears.
5. Touch the OK button.
When loading completes, the Home Screen opens.
7 – Timeline mode

Setting input monitoring

Turn input monitoring OFF for the channels (tracks) that you
are playing back. For channels that have input monitoring ON,
audio input through the input connectors is output.
1. Touch the REC/MON button on the Home Screen to open a
pull-up with REC and MON buttons.
2. If input monitoring is on for any playback channels (MON
buttons appear blue), touch those MON buttons to turn
them off (turning them gray).

Setting the online function

Refer to "Online functions" on page 122 as you make online
output settings.

Locating to playback starting points

You can locate to the time where you want to start playback
using the m[ ] and ,[
jumping and manual locate functions. When timecode synchro-
nization is ON, playback will occur at the input timecode, so
locating as described above is not necessary.
Playback
Press the PLAY key to start playback.
Press the PAUSE key to start playback standby.
To end playback standby, press the PLAY key.
Press the STOP (RETAKE) key to stop playback.
Press the .[MARK.] key or /[MARK /] key to skip
to the start of another region.
Press and hold the m[ ] key or ,[
backward or forward.
While pressing and holding the SHIFT key, press the XXX [MARK
X] key or/[MARK X] key to jump to a mark.
Press and hold the m[ ] or ,[
and holding the SHIFT key to search at high-speed.
While pressing the STOP key, press the .[MARK .] or /
[MARK /] key to skip to the beginning of the first region
recorded or the end of the last region. (This only works with the
front panel keys.)
NOTE
Playback functions can also be used via parallel control.

Call function

Press the CALL (CHASE) key to locate to the point where
playback was last started from playback standby (call point) and
put the unit in playback standby mode.
] keys and the mark
] key to search
] key while pressing
53
TASCAM HS-4000