Mark List Screen; Locating To Marks; Viewing Mark List Information - Tascam HS-4000 Owner's Manual

MARK LIST screen

Touch the Mark List button on the Home Screen to open the
MARK LIST screen.
NAME buttons
Touch to sort by mark name in descending or ascending
order.
When the mark names are sorted in ascending order, a
icon appears inside the NAME button. When in descending
order, a icon appears inside this button.
TIME buttons
Touch to sort marks by time in descending or ascending
order.
When they are sorted by time in ascending order, a
appears inside the TIME button. When in descending order, a
icon appears inside this button.
Mark name buttons
Touch to select a mark.
LOCATE ( ) buttons
Touch to locate to the corresponding mark position.
LIST INFO button
Touch to open a MARK LIST screen that shows a list of the
number of marks by type in the currently selected take.
EDIT NAME button
Touch this button to open the MARK NAME screen where
you can edit the name of the selected mark.
EDIT TIME button
Touch this button to open the MARK EDIT screen where you
can edit the position of the selected mark.
MULTI SELECT button
Use this to enable the selection of multiple marks.
DELETE button
Touch this button to erase the selected mark.
Scroll buttons
Use these buttons to scroll to the beginning or end of the
mark list or to scroll one page (five lines) at a time. You can
also scroll through the mark list one line at a time using the
DATA dial.
12 – Mark and locate functions

Locating to marks

Touch a button to locate to the corresponding mark.

Viewing mark list information

Touch the LIST INFO button on the MARK LIST screen to open
the LIST INFO page.
This screen shows a list of the number of marks by type in the
currently loaded take.
Touch the LIST INFO button again to return to the MARK LIST
screen.
NOTE
icon
After recording, the MARK LIST screen might show a TOTAL
number of marks that is 2 or 3 greater than the sum of
the MANUAL MARK, TIME, OVER and UNLK marks. This is
because the total includes REC, END and PRE (when prere-
cording) marks that are created during recording.
Mark list information screen
TASCAM HS-4000
119