Eliminating Minor Faults Yourself - NEFF K811 series User Manual

Preventing noises
The appliance is not level
Please align the installation cavity with
a spirit level. To do this, use the height-
adjustable feet of the cavity or place
something underneath.

Eliminating minor faults yourself

Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice – even if the appliance is still under
guarantee!
Fault
Temperature differs
greatly from the set
value.
Bottom of the refriger-
ator compartment is
wet.
The temperature in the
refrigerator compart-
ment is too cold.
The refrigerating unit
is switching on more
frequently and for
longer.
Possible cause
The condensation
channel or drainage
hole are blocked.
Temperature has been
set too low.
Appliance opened
frequently.
The ventilation
openings have been
covered.
Containers or storage areas wobble
or stick
Please check the removable parts
and re-insert them correctly if required.
Receptacles are touching each other
Move the receptacles slightly away from
each other.
Remedial action
In some cases it is adequate
to switch off the appliance
for 5 minutes.
If the temperature is too high wait
a few hours and check whether
the temperature has approached
the set value.
If the temperature is too low check
the temperature again the next day.
Clean the condensation channel
and the drainage hole. See chapter
Cleaning the appliance. Fig. *
Increase the temperature.
Do not open the appliance
unnecessarily.
Remove obstacles.
en
31