NEFF K811 series User Manual page 29

Notes
Regularly clean the condensation
■
channel and drainage hole, Fig. */B,
with a cotton bud to ensure that
the condensation can drain. The water
conduction channel, Fig. */A, can be
taken out for cleaning.
After cleaning, the stopper must be re-
■
inserted into the drainage hole of the
refrigerator compartment for functional
reasons.
Interior fittings
All variable parts of the appliance can be
taken out for cleaning.
Taking out the glass shelf "EasyLift"
Fig. 4
Move glass shelf all the way upwards
and take out.
Taking out the door shelf "EasyLift"
Fig. 6
Move door shelf all the way upwards and
take out.
Taking out the butter and cheese
compartment
Fig. 8
To clean the compartment, lift it at the
bottom and take out.
Removing the container
Fig. 9
Tilt container forwards and take out.
To insert the container, place the front of
the container on the telescopic rails and
push into the appliance. The container is
engaged by pushing it into the appliance.
Taking out the humidity filter
Fig. 1/19
The humidity filter over the humidity
container can be taken out for cleaning.
To do this, first take out the humidity
container and pull out the humidity filter.
Lift off the filter cover, Fig. +, and take
out the filter. Clean in lukewarm water,
leave to dry and re-assemble.
Remove telescopic rails
Fig. ,
1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear
pin.
4. Push telescopic rail together, push
backwards above the rear pin and
disengage.
Installing telescopic rails
1. Place the extended telescopic rail on
the front pin.
2. Pull the telescopic rail forwards
slightly until it engages.
3. Place telescopic rail on the rear pin.
4. Push lock backwards.
en
29