Rear View - IBM eServer xSeries 135 Installation Manual

CD eject button: Push this button to release a CD from the drive.
CD drive activity light: When this light is on, it indicates that the CD-ROM drive is in
use.

Rear view

Ethernet 1
Ethernet 1: Category 5 Ethernet cable can be plugged in to Ethernet port 1 to connect
the appliance server to an existing local area network (LAN).
PCI slot 1 and PCI slot 2: PCI adapters can be installed in these slots.
Serial port: Signal cables for modems or other serial devices connect to the 9-pin
serial port connector.
Console Out port: This port is used to connect the server to a keyboard, monitor, and
pointing device. It is also used to connect multiple servers together to share a single
keyboard, monitor, and pointing device.
Console In port: This port is used to connect multiple servers together to share a
single keyboard, monitor, and pointing device.
Note:
USB 1 and USB 2: Signal cables for Universal Serial Bus (USB) devices can be
connected to the USB connector.
Note:
Ethernet 2: Category 5 Ethernet cable can be plugged in to Ethernet port 1 to connect
the appliance server to an existing local area network (LAN).
12
IBM xSeries 135 Appliance Server: Installation Guide
PCI slot 1
Ethernet 2 USB 2
USB 1
Connecting multiple servers together to share input/output devices is not
supported.
The addition of USB devices is not supported.
PCI slot 2
Console Out
port
Console In Serial port
port