IBM eServer xSeries 135 Installation Manual page 28

exists. Appliances that have been configured using a method other than the
Advanced Appliance Configuration Utility and for which no appropriate family
exists will appear in the Orphaned Externally Configured Appliances group.
The Tree View pane contains the following items:
•
•
•
•
20
IBM xSeries 135 Appliance Server: Installation Guide
All Appliances
Every discovered appliance is listed in the tree view under All Appliances.
Families
The families group in the Tree View pane shows all families that have been
defined, with appliance servers that have already been assigned to each family
nested beneath the family name in the tree view. Since families are defined by
appliance purpose, all appliances that appear in a given family are of the same
type. If you select a family from the Tree View pane, a description of the family
and the rules that are used to define the selected Family are displayed in the
Information pane. If you select an appliance server from a family in the Tree
View pane, the selected appliance network settings are displayed in the
Information pane.
The Advanced Appliance Configuration Utility automatically assigns one IP
address within the range that is defined in the family rules per appliance server.
When a family IP address range has been exhausted, the Advanced Appliance
Configuration Utility automatically searches for other families that have rules
matching the appliance server that is being configured. If a matching family
with an available address is found, the server will automatically be assigned to
the family that has available IP addresses. This enables you to define multiple
families, each of which uses a range of noncontiguous IP address ranges.
When an appliance is discovered on the network, the Advanced Appliance
Configuration Utility automatically searches all previously defined families,
starting with the first family that is listed in the families tree view and moving
downward. Appliances are automatically added to the first defined family that
matches the appliance purpose. Therefore, the order in which families appear is
important. To adjust this search order, right-click a family and then click Move
Up or Move Down to adjust its position within the families list.
Orphaned Appliances
Any discovered appliance servers that have been configured using the
Advanced Appliance Configuration Utility but that do not match the rules for
any existing family are automatically added to the Orphaned Appliances group.
Orphaned Externally Configured Appliances
Any discovered appliance server that has been configured without the
Advanced Appliance Configuration Utility tool and does not meet the rules for
any existing family is automatically added to the Orphaned Externally
Configured Appliances group. Appliance servers that are configured without
the Advanced Appliance Configuration Utility and meet the rules for any
existing family are automatically added to the matching family. To add an
Orphaned Externally configured Appliance to an appropriate family that was
created after the orphaned appliance was discovered, right-click the orphaned
appliance and click Adopt by First Matching Family. For more information, see
"Using the Adopt by First Matching Family function" on page 22.
The Advanced Appliance Configuration Utility will not change
Note:
manually configured network settings of discovered appliance servers.
If the manually configured IP and Subnet addresses fit an existing
family, the Advanced Appliance Configuration Utility will place that
appliance server into that family but will not change any other settings
(such as Host Name or DNS or gateway addresses).