Oven Rack Supports And Oven Vents - Electrolux EW30ES6CGB Use & Care Manual

Hide thumbs Also See for EW30ES6CGB:
Table of Contents

Advertisement

Available languages

Available languages

10
Feature Overview
OVEN RACK SUPPORTS & OVEN VENTS
Oven Rack Positions
This oven is equipped with ladder rack supports with 7
positions to accomodate precisely every mode of cooking.
Rack positions
7
6
5
4
3
2
(NON-SLIDING
1
RACK ONLY)
Installing Oven Rack Supports
ALWAYS INSTALL OVEN RACK SUPPORT
BEFORE TURNING ON THE OVEN (WHEN
THE OVEN IS COOL).
To install oven rack support, insert the
supports by pushing them downward into the
two brackets on each side of the oven interior,
as shown below.
To remove the oven rack support for a self-
clean cycle, pull up the support to disengage
them from the brackets. If the rack supports
are not removed, the self-clean cycle won't
start.
Oven Vents Location
The oven is vented above each door. When
the oven is on, warm air is released through the
vents. This venting is necessary for proper air
circulation in the oven and good baking results.
Oven Vent
Warm Air

Advertisement

Table of Contents
loading

Table of Contents