Setting Clock Display - On Or Off; Setting Time Of Day - 12 Or 24 Hours; Adjusting Oven Temperature - Electrolux EW30ES6CGB Use & Care Manual

38
Electronic Control Settings
USER PREFERENCES
SETTING CLOCK DISPLAY — ON OR OFF
The oven control can be programmed to display the time of day or not. The oven has been
preset at the factory to display the time of day.
Changing clock display between ON and OFF:
1. Press USER PREF
-
2. Press or
lo
3. Press START
SETTING TIME OF DAY DISPLAY — 12 OR 24 HOURS
The oven control can be programmed to display time of day in 12 hours or 24 hours mode.
The oven has been preset at the factory to display in 12 hours mode.
Changing between 12 or 24 hour time of day display:
1. Press USER PREF
-
2 Press or
lo
3. Press START
4. Remember to set your clock after changing the time of day display mode.

ADJUSTING OVEN TEMPERATURE

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure
to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended temperature. The baking results should
help you to decide how much of an adjustment is needed. Each oven can be individually adjusted.
To adjust the oven temperature:
1. Press USER PREFERENCES
2. To select the oven you want to adjust, press USER PREFERENCES
between the upper and the lower display.
3. Enter the temperature by pressing the
adjusted by ± 35°F.
4. Press START
(CONTINUED)
until you get to the CLO on menu page.
+
to toggle between displaying or hiding the clock.
hi
to accept the changes and go back to user preferences menu display.
until you get to the CLO 12hr menu page.
+
to toggle the display of the clock in 12 or 24 hours.
hi
to accept the changes and go back to user preferences menu display.
until you get to the UPO menu page.
to accept the changes and go back to user preferences menu display.
-
+
or pads. The temperature can only be
lo
hi
again to toggle