Oven Rack Supports And Oven Vents - Electrolux EI30GS55JS Use And Care Manual

10
Feature Overview
oVen Rack suPPoRts & oVen Vents
oven Rack Positions
This oven is equipped with ladder rack supports with
8 positions to accommodate precisely every mode of
cooking.
installing oven Rack supports
AlwAys instAll oven rAck
support before turning on
the oven (when the oven is
cool).
To install oven rack support, insert the
supports by pushing them downward
into the two brackets on each side of
the oven interior, as shown below.
To remove the oven rack support for
a self-clean cycle, pull up the support
to disengage them from the brackets. If
the rack supports are not removed, the
self-clean cycle won't start.
oven Vent location
The oven is vented above each door. When
the oven is on, warm air is released through
the vents. This venting is necessary for proper
air circulation in the oven and good baking
results.
Rack
Warm Air
positions
PoSITIoN 1
(NON-SLIDING
RACK ONLy)
Oven vent