Using The Ink Cleaning Solution - Epson SureColor F2000 Series User Manual

Related tasks
Adjusting the Height of the Platen
Related topics
Loading the T-shirt

Using the Ink Cleaning Solution

When you need to clean ink stains around the suction cap that you cannot wipe off with a dry cleaning
stick, or need to clean the encoder strip (carriage scale), use the ink cleaning solution. Use the ink
cleaning solution only to clean the suction cap and encoder strip (carriage scale).
Caution: Always wear protective eye wear and gloves when applying the cleaning solution, and follow
these safety instructions:
• If cleaning solution gets on to your skin, immediately wash it off using soapy water. Consult a
physician if the skin appears irritated or discolored.
• If cleaning solution gets in your eyes, rinse immediately with water. Failure to observe this precaution
could result in bloodshot eyes or mild inflammation. If problems persist, consult a physician.
• If cleaning solution gets in your mouth, consult a physician immediately.
• If cleaning solution is swallowed, do not induce vomiting and consult a physician immediately. If
vomiting is induced, fluid may get caught in the trachea which can be dangerous.
• If you notice that the cleaning solution has changed color or emits a bad odor, stop using it and open a
new maintenance kit.
• Close the cleaning solution lid securely after use, and store it out of reach of children. Avoid storing it
in locations subject to high temperatures, high humidity, and direct sunlight.
• Wash your hands thoroughly after using the cleaning solution.
1. Remove the lid and the airtight seal from the ink cleaning solution bottle.
74