Flip Back Shell - ROHO AGILITY Operation Manual

AGI LITY INSTALLATI O N C ONT I NUE D
PSIS
AG I LITY R EMOVAL
WARNING: DO NOT remove the AGILITY with the individual seated in the wheelchair.
1
UNLOCK ( ) the safety locks.
FLIP B AC K SH EL L
Note: AGILITY must be removed from the wheelchair before flipping positions.
1
Remove the nuts at the end of the width and
height adjustment bolts with the box end
wrench. Detach the triangle brackets from the
back shell.
Posterior, Superior, Illiac Spine (PSIS):
WARNING: If the AGILITY is not positioned to make contact at the PSIS,
pelvic support and trunk control may be reduced.
ROHO, Inc. recommends that the bottom portion of an AGILITY be
positioned to make contact at the PSIS for optimal pelvic support and
trunk control.
PSIS
2
Open the left and right latches by pulling
the latches up.
2
Rotate the back shell to wide or narrow top.
- 9 -
3
Use the top handle to slightly lift the AGILITY
up and remove it from the wheelchair.
3
See all ADJUSTMENT and INSTALLATION
sections in this manual.