ROHO AGILITY Operation Manual

Headrest adapter plate
Hide thumbs Also See for AGILITY:

Advertisement

ROHO
AGILITY
®
®
This document is provided as a supplement to the ROHO AGILITY Back Systems Operation Manual and does NOT replace
any information in that manual unless otherwise noted.

DESCRIPTION OF USE

The ROHO AGILITY Headrest Adapter Plate (Headrest Adapter) is an optional accessory intended to be used with ROHO AGILITY Back Systems
(AGILITY) to attach commercially-available wheelchair headrests.
ROHO, Inc. recommends that a clinician, such as a doctor or therapist experienced in seating and positioning, be consulted to determine if the
Headrest Adapter is appropriate for the individual's particular seating needs.
INFORMATION FOR SAFETY
• DO NOT install a Headrest Adapter on an AGILITY without first reading and understanding this supplement. If assistance is needed,
contact a clinician, ROHO provider or ROHO, Inc.
• DO NOT attach, remove or adjust the Headrest Adapter when an individual is seated in the chair.
• Check the Headrest Adapter for wear, breakage and tightness daily. Retighten loose bolts following the instructions included. DO NOT
continue to use the Headrest Adapter if any of the components cannot be tightened or are broken.
CAUTION: Whenever possible, the individual in the wheelchair with an AGILITY should transfer into a manufacturer-installed vehicle
seat and use the vehicle's crash-tested occupant restraint system.
AGILITY with Quick Release Attachment Hardware and Headrest Adapter has been dynamically tested for use in a motor vehicle by a third-
party testing facility. Testing was conducted in accordance with standard RESNA WC-4:2012, Section 20: Wheelchair Seating Systems for
Use in Motor Vehicles and concluded that AGILITY with the Headrest Adapter meets all applicable performance criteria for wheelchair back
supports in 5.1 of WC20.
WARNING: AGILITY with a Headrest Adapter must be correctly and securely installed on the wheelchair following all instructions
and warnings provided in this supplement and in the AGILITY Back Systems Operation Manual.

PARTS DETAIL - PACKAGE CONTENTS

Headrest Adapter
ROHO, Inc. has a policy of continual product improvement and reserves the right to amend this document. The current version
of this document is available at permobilus.com.
© 2013, 2018 ROHO, Inc.
The following are trademarks and registered trademarks of ROHO, Inc.: ROHO
Products in this document may be covered by one or more U.S. and foreign patents and trademarks. For further details please
refer to permobilus.com.
Headrest Adapter Plate

MOTOR VEHICLE TRANSPORTATION

10mm M6-1.0 Bolts
AG-HR-BRKT
SUPPLIER: This supplement must be given to the user of this product.
USER: Before using this product, read instructions and save for future reference.

WARNINGS

4mm Hex Key
Operation Manual
Supplement
®
®
and AGILITY
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AGILITY and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ROHO AGILITY

  • Page 1 The ROHO AGILITY Headrest Adapter Plate (Headrest Adapter) is an optional accessory intended to be used with ROHO AGILITY Back Systems (AGILITY) to attach commercially-available wheelchair headrests. ROHO, Inc. recommends that a clinician, such as a doctor or therapist experienced in seating and positioning, be consulted to determine if the Headrest Adapter is appropriate for the individual’s particular seating needs.
  • Page 2 50.8mm M6 Bolt Holes *NOTE: All measurements are approximate. HEADREST ADAPTER ATTACHMENT Remove the AGILITY cover to allow access to the pre-drilled holes. After Headrest Adapter attachment is complete, the AGILITY cover may be re-installed. Refer to AGILITY Back Systems Operation Manual - COVER REMOVAL AND INSTALLATION and ACCESSORIES.

Table of Contents