Page 1
JetStream Pro Lateral Pads ™ Operations Manual Manuel d’utilisation des coussins latéraux JetStream Pro™ PROVIDER: THIS MANUAL MUST BE GIVEN TO THE USER OF THIS PRODUCT. USER: BEFORE USING THIS PRODUCT, READ THIS ENTIRE MANUAL AND SAVE FOR FUTURE REFERENCE.
The following are trademarks and registered marks of The ROHO Group, Inc.: ROHO®, shape fitting technology®, and JetStream Pro®. The ROHO Group Inc. has a policy of continual product improvement and reserves the right to amend specifications presented in this manual.
The JetStream Pro Lateral Pads are designed to assist in maintaining functional posture, as well as promote stability. JetStream Pro Lateral Pads are designed to be used only with the JetStream Pro Adjustable Back Replacement System. The Pads come in Large (Swing Away or Stationary) and Ac- tive (Stationary only) sizes.
DO NOT continue to use the JetStream Pro Lateral Pads if any component cannot be tightened or is broken. • DO NOT attach the JetStream Pro Lateral Pads with the user in the chair. The JetStream Pro Back must be removed from the wheelchair in order to install the Lateral Pads.
PARTS DETAIL A. Low Bracket A. Standard, Left Lateral Bracket Shown. F. Large, Stationary Pad Shown A. Lateral Bracket - Comes in Standard (left or right) and Low sizes. Attaches Pad to inside of Carbon Fiber Shell. B. M6 x 20 mm screws - Used to attach Lateral Bracket to carbon fiber shell.
Note existing height, depth and angle orientation before removing the Carbon Fiber Back. • Install Lateral Pads before the JetStream Pro Back is installed on wheelchair. • After Lateral Pads are installed but before Lateral Pad height, width and angle adjustments are made, install and adjust the JetStream Pro Back following the instructions in the JetStream Pro Manual.
Page 7
ATTACHMENT & ADJUSTMENT INSTRUCTIONS PAD HEIGHT ADJUSTMENT STEP 1. Remove each screw (M5 x 10mm) (part E) and move Pad (part F) up or down to achieve desired height/location. DOWN STEP 2. Reinstall and tighten each screw (M5 x 10mm (part E). NOTE: Use 3mm Allen wrench.
Check screws, bolts, brackets, and hinges for wear, breakage, and tightness daily. Re-tighten loose screws following the Attachment Instructions in this manual. DO NOT continue to use the JetStream Pro Lateral Pads if any component cannot be tightened or is broken. ROHO recommends that you have your JetStream Pro Lateral Pads thoroughly inspected by a qualified technician every six months, or as necessary.
Need help?
Do you have a question about the JetStream Pro and is the answer not in the manual?
Questions and answers