Operator Information Panel - IBM xSeries 240 Installation Manual

Table of Contents

Advertisement

Operator information panel

The operator information panel on the front of the server contains status lights.
1
2
3
4
5
6
7
8
9
1
32
IBM xSeries 240 Installation Guide
OK
100
MB
System Power Light: When this green light is on, system power is present
in the server. When this light flashes, the server is in standby mode (the
system power supply is turned off and ac current is present). When this light
is off, either a power supply, ac power, or a light has failed.
Attention:
If this light is off, it does not mean there is no electrical current present in the
server. The light might be burned out. To remove all electrical current from
the server, you must unplug the server power cords from the electrical outlets.
System POST Complete Light: This green light is on when the power-on
self-test (POST) completes without any errors.
SCSI Hard Disk Drive Activity Light: This green light is on when there is
activity on a hard disk drive.
Processor 1 Activity Light: This green light is on when there is micro-
processor 1 activity.
Processor 2 Activity Light: This green light is on when there is micro-
processor 2 activity.
Information Light: This amber light is on when the information log contains
information about certain conditions in your server that might affect perform-
ance. For example, the light will be on if your server does not have redun-
dant power. A light on the diagnostic LED panel will also be on.
System Error Light: This amber light is on when a system error occurs. A
light on the diagnostic LED panel will also be on to further isolate the error.
Ethernet Transmit/Receive Activity Light: When this green light is on,
there is transmit or receive activity to or from the server.
Ethernet Link Status Light: When this green light is on, there is an active
connection on the Ethernet port.
Ethernet Speed 100 Mbps Light: When this green light is on, the Ethernet
speed is 100 Mbps. When the light is off, the Ethernet speed is 10 Mbps.
1
2
TX
LINK
OK
RX

Advertisement

Table of Contents
loading

Table of Contents