Setting Up Routing Protocol - Rip - Asus WL-600g User Manual

Setting up routing protocol - RIP
RIP stands for Rounting Information Protocol. WL-600g supports RIPv1 and RIPv2.
1. Click Advanced Setup -> Routing -> RIP to open the configuration page.
2. To activate RIP, select Enabled radio button for global RIP mode.
3. To configure an individual interface, select the desired RIP version and operation
and check the Enabled checkbox for the interface.
4. Press Save/Apply to save and activate the settings.
WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual
43