Advanced Settings; Wan; Lan - Asus WL-600g User Manual

WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway User Manual
Advanced settings
This chapter shows how to configure other advanced router features of WL-600g.

WAN

Click Advanced Setup -> WAN in the left side menu to enter the WAN setup page. This
page allows you to edit the WAN settings.

LAN

1. Click Advanced Setup -> LAN in the left side menu to enter the Local Area Network
(LAN) Setup page. This page allows to change the IP address and subnet mask of
the router, enables or disables UPnP, IGMP snooping and DHCP server.
The default settings are:
• IP Address:
• Subnet mask:
• Enable UPnP:
• Enable IGMP Snooping: No
• Enable DHCP Server:
Start IP Address: 192.168.1.2
End IP Address:
Lease Time (hour):
DHCP server is enabled by default. You can define which addresses to be assigned to
the LAN computers by DHCP server.
2. Press Save to save the configurations and go on setting up other features. If all
settings are complete, press Save/ Reboot to apply the settings and reboot WL-600g.
38
192.168.1.1
255.255.255.0
Yes
Yes
192.168.1.254
24