Connecting Input And Output Devices - ViewSonic PJ350 User Manual

Connecting Input and Output Devices

The illustration below shows the ports and different configurations for connecting external devices to
the ViewSonic PJ350. The Package Contents illustration above shows the appropriate cables for
various devices.
NOTE: When using a computer as the input device, set the resolution of your computer's graphics
card to 1024 x 768 for the optimal projected image. Refer to the Timing Charts on pages 17-18 to
verify that the video signal timing (resolution and refresh rate) of your graphics card is supported by
the PJ350 projector.
Mouse port
(connects to PC mouse
port so Remote Control
can be used as a mouse)
RGB Port
Digital Port
DVI input port
(connects to
computer, HDTV,
and component
video player)
DVI Signal cable for
HDTV/Component
Video
Digital Port
RGB Port
Mouse cable
DVI to DVI cable
(DVI graphics card)
or
DVI to RGB cable
(VGA graphics card)
Figure 3: Projector Connection Ports
S-Video input
Audio input
Composite
Video input
Audio cable
Composite video cable
S-Video cable
VCR
Monitor
connector
(output)
Projector
(rear view)
ViewSonic
1 2
Monitor cable
S-Video VCR
ViewSonic PJ350 5