Getting Started; Important Safety Warnings - ViewSonic PJ350 User Manual

Getting Started

Congratulations on purchasing a ViewSonic PJ350 DLP projector. Save the original box and all
packing material for future shipping needs.
Height Adjustment
Button
Remote Control
Sensor

Important Safety Warnings

• Unplug the projector immediately if you detect an abnormal smell or see smoke.
• To reduce the risk of injury to the eyes, do not look directly into the laser light emitted from the
aperture on the Remote Control and do not point the laser light into anyone's eyes. This remote
control is equipped with a Class IIIA laser that emits radiation.
• Do not look directly into the lighted lens; doing so will cause severe eye injury.
• Never touch the lens or the lamp when hot or warm; doing so can cause a severe burn. Unplug the
projector and allow the unit to cool down for 30 minutes before replacing the lamp or storing the
projector.
• Keep small children away from the projector. Children can be severely burned by the hot lens.
Also, children are more likely to look directly into the lens.
• Do not place the projector on a shelf or on any other unstable surface.
• When connecting a computer to the projector, make sure the projector is power-OFF first.
• After using the projector let the cooling fan run for a few minutes before unplugging the
projector's power cord.
• Do not attempt to repair the projector yourself; doing so could cause injury.
• Do not operate the projector near water or in a humid area. Do not place drinks on or near the
projector; doing so could cause a burn or a short in an electrical circuit.
• Do not block the ventilation openings on the sides of the projector. Place the projector so that
there is adequate air circulation.
2 ViewSonic PJ350
Speaker
Lens
Figure 1: ViewSonic PJ350 Projector
Projector Control
Pad
Air Vent
AC Connector
(to the power cord)
Air Vent