Troubleshooting; Please Do Not Return This Product To The Store - Bissell powerforce 1665 series User Manual

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
Problem
Vacuum
won't pick
up dirt
Dirt is
escaping
from the
vacuum

Please do not return this product to the store.

Other maintenance or service not included in the manual should be
performed by an authorized service representative.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
www.BISSELL.com
10
Possible causes
Filters are dirty
The Main Hose is not connected
There is a crack or hole in the
Main Hose
There is a clog in the vacuum
The Dirt Container is not seated
correctly
The Dirt Container is full
Filters are missing
The Dirt Container is not seated
properly
Remedies
Remove and rinse pre-motor and
post-motor filters. Allow enough
time for them to dry properly before
reinserting
Locate the Main Hose and reconnect
by pushing the hose connection to
secure the latch
If there is a crack or hole, order a new
Main Hose from the BISSELL website
Remove debris and any other
entanglements that may be
restricting its suction
Press the Empty Button to release the
Dirt Container and reseat properly
Empty the Dirt Container
Check to see if all of the Pre-Motor
and Post-Motor filters are in place
Press the Empty Button and remove the
Dirt Container. Insert the bottom first
and pivot the Dirt Container towards
the vacuum. Listen for a "click" sound,
indicating that it snapped into place