Panasonic Lumix DMC-FZ300 Owner's Manual For Advanced Features page 148

Button
operation
—
—
[DISP.]
• The image of a part of the screen can be enlarged or reduced approximately 3 to
6 times. The image of the entire screen can be enlarged or reduced approximately
3 to 10 times.
• If you use the HDMI output during recording, the screen cannot be enlarged in
windowed mode.
Changing the MF Assist display
→
[FULL]: Enlarges the assist screen using the entire screen.
[PIP]: Enlarges the assist screen on part of the screen.
• The display of the assist screen can also be switched by touching [
5
Press the shutter button halfway
• The assist screen will close. The recording screen will be displayed.
• You can also exit MF Assist by pressing [MENU/SET].
●
If you press the cursor button when [Direct Focus Area] in the [Custom] menu is set to [ON], the
setting screen for the enlarged position appears.
●
MF Assist is not displayed in the following cases:
• During motion picture recording
• When recording with [
• When using the Digital Zoom
148
Touch
operation
Drag
Pinch in /
Pinch out
—
[Reset]
[Custom] → [MF Assist Display]
] ([4K Pre-Burst]) of the 4K Photo function
Adjusting the focus and brightness (exposure)
Taking pictures with Manual Focus
Moves the enlarged area.
Enlarges/reduces the AF area in small steps.
Enlarges/reduces the AF area in large steps.
Switches the enlarged display. (windowed/full screen)
Resets the area to be enlarged back to the center.
Description
].
SQW0419