■
When connecting with [Manual Input]
On the screen of step
(connecting by [From List])", select [Manual Input]
Enter the SSID of the wireless access point you are connecting to, then select [Set]
• For details on how to enter characters, refer to "Entering Text" (→75).
Select the network authentication type
• For information on network authentication, see the instruction manual of the wireless access
point.
Select the encryption type
• The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
[WPA2-PSK] / [WPA-PSK]
[Common Key]
[Open]
(When an option other than [No Encryption] is selected)
Enter the encryption key
●
Check the wireless access points instruction manual and settings when a saving wireless access
point.
●
If no connection can be established, the wireless access point's radio waves may be too weak.
Refer to "Message displays"
●
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
295
1
of "If you are not sure about the WPS compatibility
[TKIP] / [AES]
[WEP]
[No Encryption] / [WEP]
(→332)
and "Q&A Troubleshooting"
(→294)
Encryption types that can be set
(→340)
Wi-Fi
About connections
for details.
SQW0419