Stand-By Checking Mode; Initialize - Denon DN-MC6000 Service Manual

5. Stand-by checking mode.

(1) Pressing (PARAM.1+PARAM.2+track selction knob+CF MODE) at the same time, then turn on DN-MC6000.
(2) DN-MC6000 will enter Stand-by checking mode. Track selection knob will light.
(3) Press the track selection knob to enter Stand-by mode. Stand-by LED will light.
(4) Press RESTART to finish.
Upon completion of the adjustment, it automatically restarts, start in Normal mode.

6. Initialize

(1) Pressing (BACK+FWD+CF MODE) at the same time, then turn on DN-MC6000.
(2) Return to default setting, and these data (as follows) turn to factory default setting.
Upon completion of the adjustment, it automatically restarts, start in Normal mode.
Initialize Data
FADER LOCK FUNCTION
Sensitivity of JOG wheel
MIDI Channel
Factory default
OFF ON ⇔ OFF
±0 -4 ⇔ +4
1 ～ 4 1 ～ 4 ⇔ 13 ～ 16
Range
21