Pad Modes; Cue Mode - Denon MC7000 User Manual

Pad Modes

The pads on each deck of MC7000 controlling Serato DJ have different functions depending
on the current Pad Mode. These modes are described on the following pages.
Click a name to jump to its section:

Cue Mode

Cue Loop Mode
Flip Mode
Cue Mode
In Cue Mode, each pad assigns a hot cue point or returns the track to that hot cue point.
To enter Cue Mode, press Cue / Cue Loop / Flip so that it lights blue.
To assign a hot cue point, press an unlit pad at the desired point in your track. The pad will
light up when it is assigned.
To jump to a hot cue point, press a lit pad.
To delete an assigned hot cue point, press and hold Shift and press the corresponding pad.
Although you can play Flips in Flip Mode, you first need to record a Flip here in Cue Mode.
You can do this if you have installed the Serato Flip Expansion Pack.
To start or stop recording of a Flip, press the  button.
To learn how to play back Flips, see
18
Roll Mode
Saved Loop Mode
Cue 1 Cue 2
Cue 5 Cue 6
Flip Mode
Slicer Mode
Slicer Loop Mode
Cue 3 Cue 4
Cue 7 Cue 8
as well as the Serato DJ manual.
Sampler Mode
Velocity Sampler Mode
Pitch Play Mode