Special Mode Setting; Version Up Mode - Denon DN-MC6000 Service Manual

SPECIAL MODE

1. Special mode setting

Turns on DN-MC6000 while pressing buttons A, B,C and D.
Mode

Version Up Mode

Version indicate mode
Adjusting mode of the
touch sense sensitivity
Stand-by checking mode.
Initialize mode
2. Version Up Mode
(1) Connect MC6000 to PC with USB cable.
(2) Pressing (BACK+FWD+SHIFT) at the same time, then turn on DN-MC6000.
(3) DN-MC6000 will enter versionup mode. CUE-1 will light.
(4) Start 【DDJ Updater for DN-MC6000】 on PC.
(5) Confirm that 【Select Product】 indicates to DN-MC6000.
(6) Click 【Open File】, and then select update file.
(7) Click 【START】 to start updating.
DN-MC6000 indicates state of updating.
CUE-2: Update Data(0~49%), CUE-3: Update Data(50~99%),
CUE-4: Update Data(100%)
(8) Upon completion of the upgrade, it automatically restarts, start in Normal mode.
(9) Finish 【DDJ Updater for DN-MC6000】.
NOTE： Please do not switch off the PC during update of Firmware. In addition, please
do not take off a USB cable.
When update is failed, PC indicates "Update Fail Error!!!".
In this case, retry update,please.
A B C
1 7 8
7 8 9
2 6 9
3 4 5
1 7 9
9 1 2 3 4 5
19
D
- Firmware Upgrade
- Firmware version display.
- Adjust sensitivity of JOG wheel.
9 check Stand-by mode.
- Return to factory default setting
6 7 8
Contents