Jogger Unit Paper Positioning - Ricoh B230 Training Program

Mode : Staple or Booklet
Jogger Fence Drive : Jogger Motor
Positioning Roller Movement : Positioning Roller Solenoid
Positioning Roller Drive : Lower Transport Motor
Jam Detection : Staple Tray Exit Sensor
The jogger is used in corner-staple mode and in booklet mode.
For each sheet of paper when it arrives in the staple tray, the following is done.
The jogger motor drives the jogger fences.
The positioning roller solenoid moves the positioning roller onto the top of the sheet.
Then the lower transport motor turns on and the positioning roller rotates to push
the sheet of paper against the stopper (there are two stoppers: stopper L or stopper
S the one that is used depends on the paper size, as we shall see later.)
The jogger HP sensor detects when the jogger fences are at home position (away
from the stack).
The staple tray exit sensor detects if a jam occurs when the machine feeds the
stack out at the bottom of the jogger tray.

Jogger Unit Paper Positioning

Jogger Fence
Jogger Motor
Jogger HP Sensor
Positioning Roller
Staple tray Exit Sensor
274
274