Before you pack the finisher for transport:
•
Set DPS100 switch 1 to 1 (to lower the tray) then back to
zero.
−
This moves the lower tray to the lowest position.
•
Once the tray is in the lowers position, turn off the main
switch.
After you unpack the finisher:
•
After you turn the main switch back on, the lower tray will
return to home position automatically.
Before you send the finisher, the lower tray must be moved to the shipping
position.
To do this, the dip switch must be changed as shown on the slide.
Transporting the Finisher
263
263