Remote Control - InFocus IN226ST User Manual

VGA
Enter
Menu Zoom
The interface
is subject to
model's specifi-
cations.

Remote Control

Using the Remote Control
Power
Source
Re-Sync
Video
HDMI
3D
Four Directional
Select Keys
AV Mute
Enter
Mute
VGA
Keystone +/-
Aspect
Menu
Volume +/-
Brightness
Mode
Zoom
User Controls
Refer to the "Power On/Off the Projector"
section on pages 13-14.
Press "Source" to select an input signal.
Automatically synchronizes the projector to
the input source.
Press "Video" to choose Composite Video
and S-video source.
HDMI
Press " " to choose HDMI source. (For
certain model)
Press the "3D" to turn the 3D OSD menu on/
off.
Use to select items or make
adjustments to your selection.
Momentarily turns off/on the audio and video.
Confirm your item selection.
Momentarily turns off/on the audio.
Press "VGA" to choose VGA sources.
Adjust image distortion caused by tilting the
projector.
Use this function to choose your desired
aspect ratio.
Press "Menu" to launch the on-screen dis-
play (OSD) menu. To exit OSD, press "Menu"
again.
Adjust to increase / decrease the volume.
Change the brightness mode: Bright->Eco
->Dynamic. (refer to page 46)
Zoom in on an image.
Press buttons to alter zoom.
23
English