Table of Contents
Advertisement
INC
VMA10003-R.3727.A
ADJUSTMENT
Note) When replacing the lens unit and main PCB CP-1 it is necessary to input the QR code.
For the USB connection of L15, ONLY "PTP" is available.
1. Device:
PC, AC adapter, EH-65A，USB cable (UC-E6）
2. Service tool:
Color Viewer (J63070)，collimator (J63090)．SD card (that includes "EnablePTPAP.txt" data)
ND filter 1.0 (J63093) L15_EEPROMTOOL (J65104) Service Center Tool（J65105）
QR reader software(J65096) Two-dimensional bar code leader (J61222) △（Addition)
3. EEPROMTOOL set-up
� � System requirement
・ Windows® XP
・ PC/AT compatible machine with Pentium or higher processor
・ CD-ROM drive
・ Floppy-disk drive for 3.5-inch 2HD
・ USB port
・ 40MB or more available memory
・ 15MB or more available hard disk drive
・ VGA or SVGA with 256 or more color display
Tool for writing fixed-value
� � Copy "L15_EEPROMTOOL" into any drive of PC.
� � Open "L15_EEPROMTOOL" folder and copy "EnablePTPAP" into the SD card.
4. Order of Adjustments:
1. Firmware update (Adjustment firmware Ver.1.0b for services depts.)
2. Writing of fixed values（use EEPROMTOOL）
3. Preparation for QR code input
Settings of Language and Serial number（use Servise Center Tool
・
）
4.Start-up setting
5. FOCUS adjustment
6. WB/AGC adjustment
7. Dark DPC
8. Light/S.S
9. Flash WB
10. Cancellation of start-up setting
11. Firmware update (Firmware Ver.1.0 for commercial products)
Changed page × 1
Additional page
- A15 ･Ｌ１５ -
October.30.2007
October.16.2007
Advertisement
Table of Contents
