Table of Contents
Advertisement
Flash Unit
・Solder the white wire, which is connected from the flash unit, on the trigger coil.
(Apply "Super X" to the soldered area as a shield.)
・Attach the mylar tape to the trigger coil.
Flash wire [White]
TRIGGER COIL
Apply "Super X" to the
soldered area as a shield.
SB PCB Unit
MYLAR TAPE
Reference position for attachment
GASKET
MYLAR TAPE
- A ･Ｌ１５ -
Solder
M1.4×3.0
Flash unit
Condenser Unit
INC
VMA10003-.R3727.A
MYLAR TAPE
SB PCB Unit
TRIGGER COIL
Advertisement
Table of Contents
