Adding a Shoe-Mounted Flash Unit
Radio-controlled flash units ( 0 581) can be
combined with any of the following flash
units mounted on the camera accessory
shoe:
•
SB-5000: Before attaching the flash unit, set
it to radio-controlled master flash mode (a d icon will appear
at the top left corner of the display) and choose group or
remote-repeating flash control. Once the unit is attached,
settings can be adjusted from the camera menus or using the
controls on the SB-5000. In the case of the camera menus, use
the options listed under [Group flash options] > [Master
flash] or under [M] in the [Remote repeating options]
display.
•
SB-910, SB-900, SB-800, SB-700, SB-600: Configure the flash for
standalone use. Use the controls on the flash unit to adjust
flash settings.
•
SB-500, SB-400, SB-300: Mount the unit on the camera. Adjust
settings using the [Group flash options] > [Master flash]
item in the camera menus.
Radio AWL
594