Msw Code - Sony DSR-PD150P Service Manual

2-2. MSW Code

MSW when errors occur:
Information on MSW (mode SW) when errors occur
MSW when movement starts:
Information on MSW when movements starts when the mechanism position is moved (When the L motor is moved)
MSW of target of movement:
Information on target MSW of movement when the mechanism position is moved
Mechanical Position
← UNLOAD
BL BL
EJECT ULE
Lock released
Cassette compartment
Position Code
EJECT
BL
USE
SR
HL
LE
STOP
RP
REW
BL BL
SR HL
LS Chassis movement section
Position at which the cassette component lock is released, at the farthest unload side mechanically
7
at which the mechanism can move no further in the UNLOAD direction.
F BLANK code, at the boundary between codes.
EJECT completion position. When the cassette is ejected, the mechanism will stop at this position.
5 Cassette IN standby. The guide will start protruding out as the mechanism moves towards the
LOAD position.
D Code during loading.
9 Guide loading are performed here.
E Current limiter turned off.
Stop position in the loading state. The pinch roller separates, the tension regulator returns, and the
C
brake is imposed on both reels.
PB, REC, CUE, PAUSE positions. When pinch roller is pressed, and the tension regulator is ON,
B
the mechanism is operating at this position in modes in which normal images are shown.
REW position. The tension regulator is half on. This position is not used except for the REW
3
mode.
BL BL
LE STOP RP
Contents
5-76
LOAD →
REW
BL BL
Pinch roller pressing
Tension regulator
A (LSB)
B
C
D (MSB)