Command Control Settings - Christie DWU951 User Manual

Command Control via the Network

Command control settings

[TCP #23]
1. Command format
Same as RS-232C communication, refer to RS-232C Communication command format.
2. Response code / Error code
(1) ACK reply : 06h
Refer to RS-232C communication
(2) NAK reply : 15h
Refer to RS-232C communication
(3) Error reply : 1Ch + 0000h
Refer to RS-232C communication
(4) Data reply : 1Dh + xxxxh
Refer to RS-232C communication
(5) Authentication error reply : 1Fh + 0400h
[TCP #9715]
1. Command format
Header
0×02
[Header]
02, Fixed
[RS-232C commands]
Refer to RS-232C Communication command format
[Check Sum]
[Connection ID]
NOTE
code.
DWU951/DHD951/DWX951/DXG1051/
DWU851/DHD851/DWX851 User's Manual - Technical
RS-232C command
0×0D 13 bytes
13
( ).
13
( ).
13
( ).
13
( ).
1 byte
(
16
Connection ID
1 byte
12 ).
020-000664-03 Rev. 1 (09-2014)