Air Adjustment - Landa PGHW5-5000 Operator's Manual

MAINTENANCE & SERVICE
Beckett Burner Air Adjustment:
Air Shutter
Locking Screw
Air Shutter
Air Band
Air Band Locking
Air Shutter
Screw
Locking Screw
To adjust, start the machine and turn burner ON.
Loosen two locking screws found in the air shutter
openings (see illustration) and close air shutter until
black smoke appears from burner exhaust vent. Note
air band position. Next, slowly open the air shutter
until white smoke just starts to appear. Turn air shutter
halfway back to the black smoke position previously
noted. Tighten locking screws.
If the desired position cannot be obtained using only
the air shutter, lock the air shutter in as close a position
as can be obtained, then repeat the above procedure
on the air band setting.
LANDA Surefire Burner Air Adjustment
Reference Numbers
Air Band
Air Band Locking Screws
To adjust, start machine and turn burner ON. Loosen
two locking screws found on the air band and close air
band until black smoke appears from burner exhaust
vent. Note air band position. Next, slowly open the air
band until white smoke just starts to appear. Turn air
band halfway back to the previously noted position.
Tighten locking screws.
14
LANDA PGHW 5-5000 • 8.913-928.0 • REV. 3/13