Programmable Features - Dodge 2015 CHARGER User Manual

E L E C T R O N I C S
• If the driver stays on the Lap Timer pages, the "current" timer will reset to 0:00.0 when
ignition is placed in the off position, or ignition placed in the ON position (or will roll
over at 59:59.99 if ever possible).
• Each time the driver pushes OK for a Lap that current time populates, the Last time and
also populates the 1st (top) space on the Timer History page the current time resets to
0:00.0 at every push of the OK button.
• The timer will stop when the driver navigates away from this page.
Lap History
When selected, this screen displays the Lap History, and will color highlight the time that
is the best time from the Timer Page.
• Each time the driver pushes the OK button (while on the Lap Timer page) the current
Lap Time populates the 1st spot and the rest of the data shifts down.
• Color will indicate the time that is the best time from the Timer Page.
• Holding the OK button only resets the page you are on.
• Lap History page is a static display of lap times only.
Top Speed
When selected, this screen displays the Top Speed since last reset:
• Populates a top speed from first drive cycle and every time that speed is exceeded that
number is stored here unless/until the driver resets the screen.
• Latching over ignition cycles.
• Units will change with the global change in units.

PROGRAMMABLE FEATURES

Driver Information Display (DID)
The DID can be used to view or change the following settings. Push the UP
button to scroll through the main menus, then push the RIGHT
through the submenus of each menu item. Push the BACK button to scroll back to a
previous menu or sub menu.
• Speedometer
• Vehicle Info
• Driver Assist — If Equipped
• Fuel Economy
• Trip
148
• Audio
• Messages
• Screen Setup
• Speed Warning — If Equipped
• Diagnostic — If Equipped
or DOWN
button to scroll