Page 1 Grand Caravan 2 0 1 4 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of fea- With respect to any Vehicles Sold in Canada, the name Chrysler tures and equipment that are either standard or optional on Group LLC shall be deemed to be deleted and the name Chrysler this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfac- LLC vehicle. Be assured that it represents precision tion.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ Rearming Of The System ....18 A WORD ABOUT YOUR KEYS ... . .13 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Remote Lock Doors And Liftgate ...24 REMOTE STARTING SYSTEM — IF EQUIPPED . .31 ▫ Sound Horn With Remote Lock ... .24 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Power Door Locks — If Equipped ..37 ▫ Automatic Locking Retractor Mode (ALR) — If Equipped ......68 WINDOWS .
Page 14 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Event Data Recorder (EDR) ....91 SAFETY TIPS ......119 ▫...
Page 15: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch.
Page 16: Key Fob
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob The Key Fob operates the ignition switch. Insert the square end of the Key Fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion.
Page 17: Removing Key Fob From Ignition
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Removing Key Fob From Ignition WARNING! (Continued) Place the shift lever in PARK. Turn the Key Fob to the • Allowing children to be in a vehicle unattended is OFF position and then remove the Key Fob. dangerous for a number of reasons.
Page 18: Key-In-Ignition Reminder
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an Opening the driver’s door when the Key Fob is in the invalid Key Fob is used to start the engine.
Page 19: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 CAUTION! CAUTION! The Sentry Key® Immobilizer system is not compat- Always remove the Key Fobs from the vehicle and ible with some aftermarket remote starting systems. lock all doors when leaving the vehicle unattended. Use of these systems may result in vehicle starting At the time of purchase, the original owner is provided problems and loss of security protection.
Page 20: Customer Key Programming
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming VEHICLE SECURITY ALARM — IF EQUIPPED Programming Key Fobs or RKE transmitters may be The Vehicle Security Alarm monitors the vehicle doors performed at an authorized dealer. for unauthorized entry and the ignition switch for unau- thorized operation.
Page 21: To Arm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 present, the Vehicle Security Alarm will ignore that To Disarm The System condition and monitor the remaining doors and ignition. The Vehicle Security Alarm can be disarmed using any of the following methods: To Arm The System •...
Page 22: Tamper Alert
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • When the Vehicle Security Alarm is armed, the interior Tamper Alert power door lock switches will not unlock the doors. If something has triggered the Vehicle Security Alarm in The Vehicle Security Alarm is designed to protect your your absence, the horn will sound three times and the vehicle;...
Page 23: Remote Keyless Entry (Rke)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 The lights will fade to off after approximately 30 seconds, REMOTE KEYLESS ENTRY (RKE) or they will immediately fade to off once the ignition This system allows you to lock or unlock the doors and switch is turned to ON/RUN from the OFF position.
Page 24: Using The Rke Transmitter
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The RKE Transmitter Three-button RKE transmitters will provide basic UN- LOCK, LOCK and PANIC functions. Key Fob With Three-Button RKE Transmitter Two RKE transmitters may be supplied with the vehicle. Vehicles built without the powered options will be equipped from the factory with three-button RKE trans- Key Fob With Three-Button RKE Transmitter mitters, and those built with power options will be...
Page 25: Remote Unlock Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 (optional), power sliding doors, Remote Start feature Remote Unlock Doors And Liftgate (optional). Some features can be programmed to the Press and release the UNLOCK button on the RKE customers preferences. For example, lights flash or sound transmitter once to unlock the driver’s side or twice to horn on lock.
Page 26: Remote Lock Doors And Liftgate
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, the Remote NOTE: Pressing the LOCK button on the RKE transmit- Unlock feature can be enabled or disabled by perform- ter while you are inside the vehicle will activate the ing the following steps: Vehicle Security Alarm.
Page 27: Using The Panic Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • For vehicles equipped with the EVIC, refer to “Elec- 4. Test the feature while outside of the vehicle by press- tronic Vehicle Information Center (EVIC)/Personal ing the LOCK button on the RKE transmitter with the Settings (Customer-Programmable Features)”...
Page 28: Power Open/Close Power Liftgate - If Equipped
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE headlights and park lights will flash, the horn will pulse The power liftgate may also be opened and closed by on and off, and the interior lights will turn on. pressing the LIFTGATE button located on the overhead console.
Page 29: Power Open/Close Right Power Sliding Door - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If the vehicle is locked and the Vehicle Security Alarm is Turn Off Flash Lights With RKE Lock — If armed, pressing the LEFT Power Sliding Door button Equipped twice unlocks the power sliding door and disarms Ve- This feature will cause the turn signal lights to flash when hicle Security Alarm.
Page 30: Programming Additional Transmitters
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Press and hold the UNLOCK button on a programmed Programming Additional Transmitters RKE transmitter for at least 4 seconds, but no longer If you do not have a programmed RKE transmitter, than 10 seconds.
Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 1. Remove the emergency key by sliding the mechanical 2. Insert the tip of the emergency key or a #2 flat blade latch at the top of the RKE transmitter sideways with screwdriver into the slot and gently pry the two halves your thumb and then pull the key out with your other of the RKE transmitter apart.
Page 32: General Information
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. To assemble the RKE transmitter case, snap the two halves together. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: •...
Page 33: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 If your RKE transmitter fails to operate from a normal NOTE: distance, check for these two conditions: • The vehicle must be equipped with an automatic 1. A weak battery in the transmitter. The expected life of transmission to be equipped with Remote Start.
Page 34: Remote Start Abort Message On Electronic Vehicle Information Center (Evic) - If Equipped
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Ignition key removed from ignition switch WARNING! (Continued) • Battery at an acceptable charge level • Keep Remote Keyless Entry (RKE) transmitters away from children. Operation of the Remote Start • RKE PANIC button not pressed System, windows, door locks or other controls •...
Page 35: To Enter Remote Start Mode
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • For security, power window and power sunroof op- The EVIC message stays active until the ignition is turned to the ON/RUN position. eration (if equipped) are disabled when the vehicle is in the Remote Start mode.
Page 36: To Exit Remote Start Mode And Drive The Vehicle
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Exit Remote Start Mode And Drive The Vehicle Cancel Remote Start Before the end of the 15-minute cycle, press and release Remote Starting will also cancel if any of the following the UNLOCK button on the RKE transmitter to unlock occur: the doors and disarm the Vehicle Security Alarm (if...
Page 37: To Turn Off The Engine While In Remote Start Mode
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Turn Off The Engine While In Remote Start DOOR LOCKS Mode Manual Door Locks Press and release the REMOTE START button 1 time or Lock the front doors by pushing down on the lock knobs allow the engine to run for the entire 15-minute cycle.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Manual Door Lock Sliding Door Lock If the lock knob is rearward when you shut either side sliding door, the door will lock. Make sure the keys are not inside the vehicle before closing the door.
Page 39: Power Door Locks - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Power Door Locks — If Equipped WARNING! A power door lock switch is on each front door trim • For personal security and safety in the event of an panel. Use this switch to lock or unlock the doors. collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you press the power door lock switch while the Key Fob is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking your keys in the vehicle.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 Automatic Door Locks — If Equipped The Unlock Doors Automatically On Exit feature will not operate if there is any manual operation of the power When enabled, the door locks will lock automatically door locks (lock or unlock).
Page 42: Windows
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS Power Windows You can control either the front or rear windows using Power Vent Windows — If Equipped switches located on the driver’s door trim panel. The The Power Vent Window Switch located on the driver’s switches will operate only when the ignition switch is in door trim panel allows the driver to operate the two vent the ON/RUN or ACC position and during power acces-...
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 NOTE: Power Window switches will also remain active for up to 10 minutes after the ignition switch has been turned to OFF, depending upon the accessory delay setting. Opening a front door will cancel this feature. Power Window Lockout Switch —...
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front Passenger Power Window Switch There is a single switch on the front passenger’s door trim panel which operates the passenger door window and a set of switches that lock and unlock all doors. The switches will operate only when the ignition switch is in the ON/RUN or ACC position and during power acces- sory delay.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Auto-Down Feature — If Equipped Auto Up Feature With Anti-Pinch Protection — If Equipped The front window switches may be equipped with an Auto-Down feature. Press the window switch past the The front driver and front passenger switches may be detent, release, and the window will go down automati- equipped with an Auto Up feature.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Auto Up Reset — If Equipped • If the window runs into any obstacle during auto- To reactivate the Auto Up feature, perform the following steps after vehicle power is restored: closure, it will reverse direction and then go back down.
Page 47: Sliding Side Door
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 The switches will operate only when the ignition switch NOTE: The sliding door windows do not fully open, is in the ON/RUN or ACC position and during power stopping several inches above the window sill. accessory delay.
Page 48: Power Sliding Side Door - If Equipped
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE rocking forward and back. Rocking the handle back- Always make sure that the sliding door is fully latched wards opens the door and rocking forward releases the anytime the vehicle is in motion. hold open latch in order to close the door.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 NOTE: Pulling the outside power sliding door handle a second time while the sliding door is power opening or power closing will allow the sliding door to be opened or closed manually. Press the button on the RKE transmitter twice within five seconds to open a power sliding door.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the power sliding side door is not in the full open or To avoid unintentional operation of the power sliding doors from the rear seats, press the power sliding door close position, it will fully open when a power sliding master lock button, located in the overhead console, to door switch is pressed.
Page 51: Power Sliding Side Door Power Switch
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Power Sliding Side Door Open Flash You can turn the feature back on by repeating the previous procedure. The left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened. This will Power Sliding Side Door Master Lock Switch alert other drivers in the area that passenger(s) could be To provide a safer environment for small children riding...
Page 52: Sliding Side Door Child Protection Lock
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sliding Side Door Child Protection Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a Child Protection Door Lock system. NOTE: When the Child Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 NOTE: • After engaging the Child Protection Door Lock, always test the door from the inside to make certain it is in the desired position. • When the Child Protection Door Lock system is en- gaged, (even if the inside door lock is in the unlocked position) the door can be opened only by using the outside door handle, the RKE transmitter, the switches...
Page 54: To Disengage Child Protection Door Lock
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • After setting the Child Protection Door Lock system, Avoid trapping anyone in the vehicle in a collision. always test the door from the inside to make certain it Remember that the sliding doors can only be opened is in the desired position.
Page 55: Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 LIFTGATE On vehicles equipped with power locks, the liftgate can be unlocked using the Remote Keyless Entry (RKE) transmitter button, or by activating the power door lock switches located on the front doors. To open the liftgate, press the liftgate release handle located on the underside of the license plate bar and pull the liftgate open with one fluid motion.
Page 56: Power Liftgate - If Equipped
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Liftgate — If Equipped The power liftgate may be opened manually or by using the button on the Remote Keyless Entry (RKE) transmit- ter. Press the button on the transmitter twice within five seconds, to open the power liftgate.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 The power liftgate may be closed by pressing the button, and several audible beeps will occur to signal that the located in the upper left trim in the liftgate opening. liftgate is opening or closing. Pushing once will only close the liftgate.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • During power operation, whether liftgate is fully open • If the power liftgate encounters multiple obstructions or fully closed, the liftgate chime will beep several within the same cycle, the system will automatically times indicating power operation is in progress.
Page 59: Occupant Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 • Front seat belts incorporate pretensioners that may OCCUPANT RESTRAINTS enhance occupant protection by managing occupant Some of the most important safety features in your energy during an impact event vehicle are the restraint systems: •...
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Advanced Front Air Bags have a multistage Children that are not big enough to wear the vehicle seat inflator design. This allows the air bag to have different belt properly (see section on Child Restraints) should be rates of inflation based on several factors, including the secured in child restraints or belt-positioning booster severity and type of collision.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 4. Do not lean against the door or window. If your WARNING! (Continued) vehicle has side air bags, and deployment occurs, the • Being too close to the steering wheel or instrument side air bags will inflate forcefully into the space panel during Advanced Front Air Bag deployment between you and the door.
Page 62: Lap/Shoulder Belts
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belts WARNING! (Continued) All seats in your vehicle are equipped with lap/shoulder • Being too close to the Seat-Mounted Side Air Bag belts. (SAB) during deployment could cause you to be severely injured or killed.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • Two people should never be belted into a single vehicle that is not equipped with seats and seat seat belt.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is near the seatback of the WARNING! front seats and next to your arm in the rear seats. • A belt that is worn under your arm is dangerous. Grasp the latch plate and pull out the belt.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click”. • A belt that is buckled into the wrong buckle will not protect you properly.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 6. To release the belt, push the red button on the buckle. Pull the strap down and secure the small latch plate of The belt will automatically retract to its stowed posi- the lap belt into the small buckle until you hear a “click”.
Page 68: Seat Belts In Passenger Seating Positions
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE pushing anywhere on the anchorage. To move the an- As a guide, if you are shorter than average you will chorage downward, squeeze the actuation buttons while prefer a lower position, and if you are taller than average simultaneously pushing down on the anchorage assem- you will prefer a higher position.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Second Row Bench Seat Second Row Captains Chairs Driver Center Passenger Driver Center Passenger First Row First Row Second Row Second Row Bench SnG Seating Seating Third Row Cinch Third Row Cinch •...
Page 70: Automatic Locking Retractor Mode (Alr) - If Equipped
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE out only the amount of webbing necessary to comfort- How To Engage The Automatic Locking Mode ably wrap around the occupant’s mid-section. Slide the 1. Buckle the combination lap and shoulder belt. latch plate into the buckle until you hear a click.
Page 71: Energy Management Feature
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Seat Belt Pretensioners WARNING! The seat belts for both front seating positions are • The belt and retractor assembly must be replaced if equipped with pretensioning devices that are designed to the seat belt assembly Automatic Locking Retractor remove slack from the seat belt in the event of a collision.
Page 72: Supplemental Active Head Restraints (Ahr)
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Active Head Restraints (AHR) When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap These head restraints are passive, deployable compo- between the back of the occupant’s head and the AHR.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 AHR In Reset Position 3 — Final Downward Movement To Engage Locking Mechanism 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
Page 76: Enhanced Seat Belt Use Reminder System (Beltalert®)
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Reminder Light and sounding an intermittent chime. Once the sequence starts, it will continue for the entire • If you have difficulties or problems resetting the Active duration or until the respective seatbelts are fastened. Head Restraints, see an authorized dealer.
Page 77: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 BeltAlert® can be enabled or disabled by your autho- Seat Belt Extender rized dealer. Chrysler Group LLC does not recommend If a seat belt is too short, even when fully extended and deactivating BeltAlert®.
Page 78: Supplemental Restraint System (Srs) - Air Bags
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) — Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air Bag is mounted in the center of the steering wheel.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 NOTE: The Driver and Front Passenger Advanced Front This vehicle may be equipped with Supplemental Side Air Bags are certified to the new Federal regulations for Air Bag Inflatable Curtains (SABIC) to protect the driver, Advanced Air Bags.
Page 80: Air Bag System Components
78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Seat-Mounted Side Air Bags (SAB) Air Bag System Components • Front and Side Impact Sensors Your vehicle may be equipped with the following air bag system components: • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, •...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Supplemental Seat-Mounted Side Air Bags (SAB) WARNING! Supplemental Seat-Mounted Side Air Bags (SAB) may • No objects should be placed over or near the air provide enhanced protection to help protect an occupant bag on the instrument panel, because any such during a side impact.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the air bag deploys, it opens the seam between the WARNING! front and side of the seat’s trim cover. Each air bag deploys independently; a left side impact deploys the left Do not use accessory seat covers or place objects air bag only and a right-side impact deploys the right air between you and the side air bags;...
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 • Being too close to the SAB and SABIC air bags during Supplemental Side Air Bag Inflatable Curtain (SABIC) — If Equipped deployment could cause you to be severely injured or killed. SABIC air bags may offer side-impact and vehicle roll- over protection to front and rear seat outboard occupants The system includes side impact sensors that are cali-...
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SAB and SABIC air bags are a supplement to the seat belt WARNING! (Continued) restraint system. Occupants, including children who are • Do not use accessory seat covers or place objects up against or very close to SAB or SABIC air bags can be between you and the side air bags;...
Page 85: Air Bag Deployment Sensors And Controls
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Supplemental Driver Side Knee Air Bag Air Bag Deployment Sensors And Controls The Supplemental Driver Side Knee Air Bag provides Occupant Restraint Controller (ORC) enhanced protection and works together with the Driver The ORC is part of a Federally regulated safety system Advanced Front Air Bag during a frontal impact.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE are and the Supplemental Driver Side Knee Air Bag not Because air bag sensors measure vehicle deceleration expected to reduce the risk of injury in rear, side, or over time, vehicle speed and damage by themselves are rollover collisions.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 The ORC contains a backup power supply system that WARNING! may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment. Ignoring the Air Bag Warning Light in your instru- ment panel could mean you won’t have the air bags Also, the ORC turns on the Air Bag Warning to protect you in a collision.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE are possible, based on several factors, including the Supplemental Driver Side Knee Air Bag. The trim cover collision type and severity. The steering wheel hub trim separates and folds out of the way allowing the air bag to cover and the upper right side of the instrument panel inflate to the full size.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 at a very high speed and with such a high force that it positioned in the area where the side curtain air bag could injure you if you are not seated properly, or if items inflates.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE event the ORC will determine whether to have the NOTE: Front and/or side air bags will not deploy in all Enhanced Accident Response System perform the follow- collisions. This does not mean something is wrong with ing functions: the air bag system.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 bag inflation. These airborne particles may irritate the Maintaining Your Air Bag System skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water. For nose or WARNING! throat irritation, move to fresh air.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag Warning Light WARNING! (Continued) • Do not attempt to modify any part of your air bag You will want to have the air bags ready to system. The air bag may inflate accidentally or may inflate for your protection in a collision.
Page 93: Event Data Recorder (Edr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 NOTE: If the speedometer, tachometer, or any engine assist in understanding how a vehicle’s systems per- related gauges are not working, the Occupant Restraint formed. The EDR is designed to record data related to Controller (ORC) may also be disabled.
Page 94: Child Restraints
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: EDR data are recorded by your vehicle only if a Child Restraints non-trivial crash situation occurs; no data are recorded by Everyone in your vehicle needs to be buckled up at all the EDR under normal driving conditions and no per- times, including babies and children.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Before buying any restraint system, make sure that it has WARNING! a label certifying that it meets all applicable Safety Standards. You should also make sure that you can install In a collision, an unrestrained child can become a it in the vehicle where you will use it.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Children who are two years old or Either an Infant Carrier or a Convertible Toddlers younger and who have not reached the Child Restraint, facing rearward in the rear...
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Infants And Child Restraints WARNING! Safety experts recommend that children ride rearward- • Never place a rear facing infant seat in front of an facing in the vehicle until they are two years old or until air bag.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children And Child Restraints WARNING! Children who are two years old or who have outgrown • Improper installation can lead to failure of an their rear-facing convertible child seat can ride forward- infant or child restraint.
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 1. Can the child sit all the way back against the back of WARNING! (Continued) the vehicle seat? • When your child restraint is not in use, secure it in 2. Do the child’s knees bend comfortably over the front the vehicle with the seat belt or LATCH anchor- of the vehicle seat –...
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the answer to any of these questions was “no,” then the WARNING! child still needs to use a booster seat in this vehicle. If the child is using the lap/shoulder belt, check belt fit peri- Never allow a child to put the shoulder belt under an odically and make sure the seat belt buckle is latched.
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Recommendations For Attaching Child Restraints Use any attachment method shown with an “X” Below Combined LATCH – Weight of the LATCH – Restraint Type Lower Anchors Seat Belt + Top Child + Child Lower Anchors Seat Belt Only + Top Tether...
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For Children (LATCH) Your vehicle is equipped with the child restraint anchor- Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 LATCH Positions For Installing Child Restraints In This Vehicle Second Row Bench Second Row Captains Chairs Lower Anchorage Symbol 2 anchorages per seating • position Lower Anchorage Symbol 2 anchorages per seating position Top Tether Anchorage Symbol •...
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraint LATCH Positions What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system weight + weight of the child re- until the combined weight of the straint) for using the LATCH an- child and the child restraint is chorage system to attach the child...
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Can two child restraints be at- Never “share” a LATCH anchorage tached using a common lower with two or more child restraints. LATCH anchorage? If the center position does not have dedicated LATCH lower anchor- ages, use the seat belt to install a child seat in the center position next to a child seat using the...
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 LATCH Anchorages (Third Row 60/40 Anchorages LATCH Anchorages (Third Row 60/40 Anchorage Shown) Shown) Locating The LATCH Anchorages LATCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower In addition, there are tether strap anchors lo- anchorage and a way to tighten the connection to the...
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE rear-facing infant restraints will also be equipped with a Center Seat LATCH tether strap. The tether strap will have a hook at the end If a child restraint installed in the center position blocks to attach to the top tether anchorage and a way to tighten the seat belt webbing or buckle for the outboard position, the strap after it is attached to the anchorage.
Page 109 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 To Install A LATCH-compatible Child Restraint move it to its rear-most position to make room for the child seat. You may also move the front seat forward 1. If the selected seating position has a Switchable Auto- to allow more room for the child seat.
Page 110 108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 7. Test that the child restraint is installed tightly by WARNING! pulling back and forth on the child seat at the belt • Improper installation of a child restraint to the path. It should not move more than 1 inch (25.4 mm) in any direction.
Page 111 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 Installing Child Restraints Using The Vehicle Seat Lap/Shoulder Belt Systems for Installing Child Belt Restraints in this Vehicle The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Second Row Bench...
Page 113 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 Lap/Shoulder Belt Systems What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using weight of the child restraint) for using the Child Restraint the seat belt to install a forward facing Tether Anchor with the seat belt to attach a child restraint, up to the recommended...
Page 114 112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of the seat belt until you have pulled all the seat belt Automatic Locking Retractor (ALR) webbing out of the retractor.
Page 115 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 9. Test that the child restraint is installed tightly by 2. Next, pull enough of the seat belt webbing from the pulling back and forth on the child seat at the seat belt retractor to pass it through the belt path of the child path.
Page 116 114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. Test that the child restraint is installed tightly by If the belt still cannot be tightened after you shorten the pulling back and forth on the child seat at the belt buckle, disconnect the latch plate from the buckle, turn path.
Page 117 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts.
Page 118 116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap.
Page 119: Commercial Cargo Vehicles
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 COMMERCIAL CARGO VEHICLES (NO FACTORY INSTALLED REAR SEATS) — IF EQUIPPED Commercial cargo vehicles are not designed for use as a family vehicle and are not intended for carrying children in the front passenger seat. However, if you must carry a child in a vehicle without a rear seat, the passenger seat should be moved to the full rearward position and the child must be in a proper restraint system based on its...
Page 120: Restraining Infants And Small Children In
118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Restraining Infants And Small Children In 3. Using the hook attached to the child restraint tether Commercial Cargo Vehicles strap, attach the child restraint tether strap to the metal anchor on the lower rear of the front passenger There are different sizes and types of restraints for seat.
Page 121: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 119 ENGINE BREAK-IN RECOMMENDATIONS CAUTION! A long break-in period is not required for the engine and Never use Non-Detergent Oil or Straight Mineral Oil drivetrain (transmission and axle) in your vehicle. in the engine or damage may result. Drive moderately during the first 300 miles (500 km).
Page 122: Exhaust Gas
120 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! • Do not leave children or animals inside parked WARNING! vehicles in hot weather. Interior heat build-up may Exhaust gases can injure or kill. They contain carbon cause serious injury or death. monoxide (CO), which is colorless and odorless.
Page 123: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 121 Safety Checks You Should Make Inside The WARNING! (Continued) Vehicle • If it is necessary to sit in a parked vehicle with the Seat Belts engine running, adjust your heating or cooling controls to force outside air into the vehicle.
Page 124 122 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE not lit during starting, see your authorized dealer. If the WARNING! light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- Defroster sonal injury.
Page 125: Periodic Safety Checks You Should Make Outside
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 123 Periodic Safety Checks You Should Make Outside WARNING! (Continued) The Vehicle • Check mounting of mats on a regular basis. Always Tires properly reinstall and secure floor mats that have been removed for cleaning. Examine tires for excessive tread wear and uneven wear •...
Page 126 124 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lights Have someone observe the operation of brake lights and exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks.
Page 127: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Tilt Mirrors In Reverse (Available With Memory MIRRORS ......132 Seat Only) —...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Operation ......149 ▫ Power Lumbar — If Equipped ... .188 ▫...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 ▫ Daytime Running Lights — If Equipped ..227 DRIVER MEMORY SEAT — IF EQUIPPED ..217 ▫ Programming The Memory Feature ..218 ▫...
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Mist Feature ......233 ▫ To Accelerate For Passing ....243 ▫...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 ▫ Front Overhead Console....256 ▫ General Information....269 ▫...
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Umbrella Holder .....285 ELECTRICAL POWER OUTLETS — IF EQUIPPED ......273 ▫...
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 LOAD LEVELING SYSTEM — IF EQUIPPED . .299 SUN SCREENS — IF EQUIPPED ... .305 ROOF LUGGAGE RACK — IF EQUIPPED ..299 ▫...
Page 134: Mirrors
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 135: Automatic Dimming Mirror - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Page 136: Outside Mirrors
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors Driver’s Outside Automatic Dimming Mirror — If Equipped To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight The driver’s outside mirror will automatically adjust for overlap of the view obtained on the inside mirror.
Page 137: Power Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Power Mirrors — If Equipped The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. To adjust a The power mirror controls are located on the driver-side mirror, press either the L (left) or R (right) to select the door trim panel.
Page 138: Heated Mirrors - If Equipped
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Mirrors — If Equipped NOTE: The Tilt Mirrors in Reverse feature is not enabled when delivered from the factory. The Tilt Mirrors in Reverse feature can be enabled or disabled in the Elec- These mirrors are heated to melt frost or ice.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Resetting the Power Folding Outside Mirrors You may need to reset the power folding mirrors if the following occurs: • The mirrors are accidentally blocked while folding. • The mirrors are accidentally manually folded/ unfolded.
Page 140: Illuminated Vanity Mirrors - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors — If Equipped BLIND SPOT MONITORING (BSM) — IF EQUIPPED An illuminated vanity mirror is located on the sun visor. To use the mirror, rotate the sun visor down and swing The Blind Spot Monitoring (BSM) system uses two radar- the mirror cover upward.
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Automatic Transmission Vehicles The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand-by mode when the vehicle is in PARK. Manual Transmission Vehicles The BSM system sensors operate when the vehicle is in any gear and enters stand-by mode when the Park Brake is engaged, the vehicle is not in REVERSE, and the vehicle is stationary.
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE vehicle speed reaches approximately 6 mph (10 km/h) or higher and will alert the driver of vehicles in these areas. NOTE: • The BSM system does NOT alert the driver about rapidly approaching vehicles that are outside the de- tection zones.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 properly. Do not block the area of the rear fascia where the radar sensors are located with foreign objects (bum- per stickers, bicycle racks, etc.). The BSM system notifies the driver of objects in the detection zones by illuminating the BSM warning light located in the outside mirrors in addition to sounding an audible (chime) alert and reducing the radio volume.
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate. Rear Monitoring Overtaking Traffic If you pass another vehicle slowly (with a relative speed Overtaking/Approaching of less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning...
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in berms, etc.
Page 146: Rear Cross Path
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
Page 148: Modes Of Operation
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Modes Of Operation Blind Spot Alert Lights/Chime Modes Of Operation With EVIC When operating in Blind Spot Alert Lights/Chime mode, the BSM system will provide a visual alert in the appro- Three selectable modes of operation are available in the priate side view mirror based on a detected object.
Page 149: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 When the system is in RCP, the system shall respond with Operation is subject to the following two conditions: both visual and audible alerts when a detected object is 1. The device may not cause harmful interference. present.
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Uconnect® Phone requires a mobile phone Uconnect® Phone works no matter where you stow your equipped with the Bluetooth® “Hands-Free Profile,” mobile phone (be it your purse, pocket, or briefcase), as Version 0.96 or higher.
Page 151: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Uconnect® Phone Button The Uconnect® Phone is fully integrated with the vehi- cle’s audio system. The volume of the Uconnect® Phone The radio or steering wheel controls (if can be adjusted either from the radio volume control equipped) will contain the two control buttons knob or from the steering wheel radio control (right (Uconnect®...
Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Prior to giving a voice command, one must wait for the Voice Command Tree beep, which follows the “Ready” prompt or another Refer to “Voice Tree” in this section. prompt. Help Command •...
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Pair (Link) Uconnect® Phone To A Mobile Phone enter into your mobile phone. You can enter any four-digit PIN. You will not need to remember this PIN To begin using your Uconnect® Phone, you must pair after the initial pairing process.
Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE phone when you make a call. You can select to use a Call By Saying A Name lower priority mobile phone at any time (refer to • Press the button to begin. “Advanced Phone Connectivity” in this section). •...
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 • A maximum of 1000 entries per phone will be down- Phonebook Download — Automatic Phonebook Transfer From Mobile Phone loaded and updated every time a phone is connected to the Uconnect® Phone. If equipped and specifically supported by your phone, •...
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Add Names To Your Uconnect® Phonebook After you are finished adding an entry into the phone- book, you will be given the opportunity to add more NOTE: Adding names to the Uconnect® Phonebook is phone numbers to the current entry or to return to the recommended when the vehicle is not in motion.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 • Press the button to begin. mobile and a home number, but you can add “John Doe’s” work number later using the “Phonebook Edit • After the “Ready” prompt and the following beep, say Entry”...
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect® Phone will ask you to verify that you from the list, press the button while the Uconnect® Phone is playing the desired entry and wish to delete all the entries from the phonebook. say “Delete.”...
Page 159: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 • To call one of the names in the list, press the but- Answer Or Reject An Incoming Call — No Call ton during the playing of the desired name, and say Currently In Progress “Call.”...
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Uconnect® Phone compatible phones in the Place/Retrieve A Call From Hold market today do not support rejecting an incoming call To put a call on hold, press the button until you hear when another call is in progress.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Three-Way Calling Redial • Press the To initiate three-way calling, press the button while button to begin. a call is in progress, and make a second phone call, as • After the “Ready” prompt and the following beep, say described under “Making a Second Call While Cur- “Redial.”...
Page 162: Uconnect® Phone Features
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the “Ready” prompt and the following beep, say ends, or until the vehicle battery condition dictates cessation of the call on the Uconnect® Phone and the name of the language you wish to switch to transfer of the call to the mobile phone.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 • If supported, this number may be programmable on If the phone is not reachable and the Uconnect® Phone is operational, you may reach the emergency number as some systems. To do this, press the button and say follows: “Setup,”...
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Roadside Assistance/Towing Assistance Voice Mail Calling If you need roadside assistance: To learn how to access your voice mail, refer to “Working with Automated Systems”. • Press the button to begin. Working With Automated Systems •...
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 to enter your PIN followed with a pound, (3 7 4 6 #), NOTE: you can press the button and say, “3 7 4 6 # Send.” • You may not hear all of the tones due to mobile phone Saying a number, or sequence of numbers, followed network configurations.
Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts ON/OFF Dialing Using The Mobile Phone Keypad Turning confirmation prompts off will stop the system You can dial a phone number with your mobile phone from confirming your choices (e.g., the Uconnect® Phone keypad and still use the Uconnect®...
Page 167: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Mute/Un-Mute (Mute ON/OFF) from your Uconnect® Phone paired mobile phone to the Uconnect® Phone or vice versa, press the button When you mute the Uconnect® Phone, you will still be and say “Transfer Call.” able to hear the conversation coming from the other party, but the other party will not be able to hear you.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say “List Phones.” • You can also press the button at any time while the list is being played, and then choose the phone • The Uconnect® Phone will play the phone names of all that you wish to select.
Page 169: Things You Should Know About Your Uconnect
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 • You can also press the button at any time while From outside the Uconnect® Phone mode (e.g., from the list is being played, and then choose the phone radio mode): you wish to delete. •...
Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Make sure that no one other than you is speaking Reset during a Voice Command period. • Press the button. Performance is maximized under: • After the “Ready” prompt, and the following beep, say •...
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 • When navigating through an automated system such • In a convertible vehicle, system performance may be as voice mail, or when sending a page, at the end of compromised with the convertible top down. speaking the digit string, make sure to say “Send.”...
Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Echo at the phone far end can sometimes be reduced • Press the button. by lowering the in-vehicle audio volume. • After the “Ready” prompt and the following beep, say • In a convertible vehicle, system performance may be “SMS Read”...
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 To send a message, press the button while the 10. Thanks system is listing the message and say “Send.” 11. See You in 15 minutes Uconnect® Phone will prompt you to say the name or 12.
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Power-Up After switching the ignition key from OFF to either the Turning the SMS Incoming Announcement OFF will stop ON or ACC position, or after a language change, you the system from announcing the new incoming mes- must wait at least 15 seconds prior to using the system.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173...
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175...
Page 178 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) zero call cancel three confirmation prompts four continue five delete dial seven download eight edit nine emergency star (*) English plus (+) erase all pound (#) Espanol add location...
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Voice Commands Voice Commands Primary Alternate (s) Primary Alternate (s) help previous home record again language redial list names return to main menu return or main menu list phones select phone select mobile send mute set up...
Page 180: General Information
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada. Operation is subject to the following conditions: The Uconnect®...
Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 If you would like to interrupt the system while it lists WARNING! options, press the Voice Command button, listen for the beep, and say your command. Any voice commanded system should be used only in safe driving conditions following all applicable Pressing the Voice Command button while the...
Page 182: Commands
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The system will best recognize your speech if the win- Changing The Volume dows are closed, and the heater/air conditioning fan is 1. Start a dialogue by pressing the Voice Command set to low. button.
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 • “Radio FM” (to switch to radio FM mode) • “Previous Station” (to select the previous station) • “Sat” (to switch to Satellite radio mode) • “Radio Menu” (to switch to the radio menu) •...
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Satellite Radio Disc Mode To switch to satellite radio mode, say “Sat” or “Satellite To switch to the disc mode, say “Disc.” In this mode, you Radio.” In this mode, you may say the following com- may say the following commands: mands: •...
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Bluetooth® Streaming (BT) Mode – “Continue” (to continue recording) To switch to Bluetooth® Streaming (BT) mode, say – “Delete” (to delete the recording) “Bluetooth Streaming.” In this mode, you may say the • “Play Memos” (to play previously recorded memos) — following commands: During the playback you may press the Voice Com- •...
Page 186: Voice Training
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setup NOTE: Keep in mind that you have to press the Voice Command button first and wait for the beep To switch to system setup, you may say one of the before speaking the “Barge In” commands. following: Voice Training •...
Page 187: Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 2. Repeat the words and phrases when prompted by WARNING! (Continued) Uconnect® Voice. For best results, the “Voice Training” • Do not allow people to ride in any area of your session should be completed when the vehicle is vehicle that is not equipped with seats and seat parked, engine running, all windows closed, and the belts.
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 189 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Tilting The Seat Up Or Down CAUTION! The angle of the seat cushion can be adjusted in four Do not place any article under a power seat or directions. Pull upward or push downward on the front impede its ability to move as it may cause damage to or rear of the seat switch, the front or rear of the seat the seat controls.
Page 190: Power Lumbar - If Equipped
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Do not place any article under a power seat or Moving a seat while driving could result in loss of impede its ability to move as it may cause damage to control which could cause a collision and serious the seat controls.
Page 191: Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater.
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicles Equipped With Remote Start You can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of On models that are equipped with remote start, the heat in use.
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 When the HIGH-level setting is selected, the heater will provide a boosted heat level during the initial stages of operation. Then, the heat output will drop to the normal HIGH-level. If the HIGH-level setting is selected, the system will automatically switch to LOW-level after approximately 60 minutes of continuous operation.
Page 194: Manual Front/Second Row Seat Adjuster
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can choose from HIGH, LOW or OFF heat settings. When the HIGH-level setting is selected, the heater will Amber indicator lights in each switch indicate the level of provide a boosted heat level during the initial stages of heat in use.
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 196: Manual Reclining Seats - If Equipped
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Reclining Seats — If Equipped To recline, lean forward slightly, lift the lever, then push back to the desired position and release the lever. Lean For models equipped with manual reclining seats, the forward and lift the lever to return the seatback to its recline lever is located on the outboard side of the seat.
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 When AHRs deploy during a rear impact, the front half WARNING! of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. The head restraints for all occupants must be prop- This system is designed to help prevent or reduce the erly adjusted prior to operating the vehicle or occu- extent of injuries to the driver and front passenger in...
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Push Button Active Head Restraint (Normal Position) For comfort the Active Head Restraints can be tilted forward and rearward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information. WARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. To avoid accidental deployment of the Ac- tive Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Re- straint during sudden stops.
Page 201: Stow 'N Go® Seating - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Head Restraints — Third Row NOTE: Seat will not stow in the storage bin unless the armrests are raised. The head restraint in the center position can be raised and lowered for tether routing. Refer to “Occupant Re- 4.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Pull upward on the seatback recliner lever located on The non-adjustable head restraint and seatback will fold the outboard side of the seat. automatically during the seat tumble. No additional actuation is necessary. Seatback Recliner Lever, Seat Tumble, And Head Restraint Fold Lever Non-Adjustable Head Restraint...
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Tumbled Second Row Seat Automatic Folding Seatback 6. Push the seat into the storage bin. The seat will automatically tumble into position for easy storage.
Page 204 202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. WARNING! In a collision, serious injury could result if the seat storage bin covers are not properly latched.
Page 205 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 To Unstow Second Row Seats WARNING! (Continued) 1. Pull up on the storage bin latch to open the cover. • Sitting in a seat with the head restraint in its lowered position could result in serious injury or 2.
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Return the seatback to the upright position. Raising The Head Restraint 3. Pull up on the seatback recliner lever on the outboard Raising The Seatback side of the seat to fold head rest and seatback and 2.
Page 207: Quad Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Easy Entry Second Row The seat will automatically fold into position for easy entry into the third row. The second row Stow ’n Go® seats allow easy entry to the third row seat or rear cargo area. WARNING! Pull up on the seatback recliner lever on the outboard In the event of a collision you could be injured if the...
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Fold-Flat To fold the seat, lift the recliner lever to the full upward position and push the seatback forward until it rests on the seat cushion. Recline Lever WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Easy Entry For passengers seated in the third row, there is a pull strap located on the outboard side of the seat near the The Quad seats can be tilted forward for easy entry into bottom of the seat back.
Page 211: Second Row Bench Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Removal Second Row Bench Seat — If Equipped The Quad seats can be removed if additional storage is While the bench seat does not stow in the floor, it is needed. With the seat in the easy entry position, push the removable for added cargo space.
Page 212: Third Row Power Recline - If Equipped
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE indicator button pops up when the seat is unlocked. The To reinstall the seat, align the seat into the detent posi- seat assembly can now be removed from the vehicle and tions on the floor. Squeeze the release handle and rotate moved on its Easy Out®...
Page 213: Third Row Power Folding Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 NOTE: Lower the head restraint by pulling on the release strap marked “1” located on the outboard side of the head restraint. Third Row Power Seat Switch Third Row Power Folding Seat — If Equipped A one-touch power folding seat switch is located in the Head Restraint Release Strap “1”...
Page 214 212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE One Touch Folding Seat Third Row Rear Panel Power Switch Bank The rear switch bank allows multiple power folding and 1 — Open To Normal 3 — Tailgate/Fold Flat unfolding positions for the third row seats. 2 —...
Page 215: Manually Folding Third Row Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 NOTE: Manually Folding Third Row Seats — If Equipped • Disconnect the center shoulder belt from the small 1. Lower the center head restraint down to the seatback buckle and lower the head restraints before attempting by pushing the button on the guide and pushing the to fold/stow the power third row seats.
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull release strap marked “2” located on the rear of the seat to lower the seatback. Head Restraint Release Strap “1” Release Strap “2”...
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 4. Pull release strap marked “3” to release the anchors. 5. Pull release strap marked “4” and tumble the seat rearward into the storage bin. Release Strap “3” Release Strap “4”...
Page 218 216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pulling strap “4” releases the seatback to return to its full upright position. 4. Raise the head restraint to its upright position. WARNING! • In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments.
Page 219: Plastic Grocery Bag Retainer Hooks
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 Tailgate Mode Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag 1. Pull release strap “3”, then pull release strap “4” to handles are built into the seatbacks of all rear seats and rotate the entire seat rearward.
Page 220: Programming The Memory Feature
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming The Memory Feature NOTE: To create a new memory profile, perform the following: 1. Cycle the vehicles ignition to the ON/RUN position (Do not start the engine). 2. Adjust all memory profile settings to desired prefer- ences (i.e., driver’s seat, outside mirrors, adjustable pedals and radio station presets).
Page 221: Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 NOTE: NOTE: Before programming your RKE transmitters you must select the “RKE Linked To Memory” feature • Memory profiles can be set without the vehicle in through the Electronic Vehicle Information Center PARK, but the vehicle must be in PARK to recall a (EVIC).
Page 222: Memory Position Recall
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Once the profile has been recalled, press and release To recall the memory settings for driver one, press the SET (S) button on the memory switch. MEMORY button 1 on the driver’s door or the UNLOCK button on the RKE transmitter linked to memory position 1.
Page 223: Easy Entry/Exit Seat (Available With Memory Seat Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 • When you remove the key from the ignition switch the Easy Entry/Exit Seat (Available With Memory Seat ONLY) driver seat will move to a position 0.3 in (7.7 mm) forward of the rear stop if the driver seat position is This feature provides automatic driver seat positioning to between 0.9 –...
Page 224: To Open And Close The Hood
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Easy Entry/Easy Exit feature can be enabled or disabled through the programmable features in the Electronic Vehicle Information Center (EVIC). If your vehicle is not equipped with an EVIC, your dealership can activate/deactivate this feature for you.
Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 2. Move to the front of the vehicle and look inside the Use the hood prop rod to secure the hood in the open center of the hood opening. Locate, then push the position.
Page 226: Lights
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS CAUTION! Headlight Switch To prevent possible damage, do not slam the hood to The headlight switch is located on the left side of the close it. Lower the hood until it is open approxi- instrument panel.
Page 227: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Automatic Headlights — If Equipped This system automatically turns your headlights on or off based on ambient light levels. To turn the system on, turn the headlight switch to the extreme counterclockwise position aligning the indicator with the AUTO on the headlight switch.
Page 228: Headlight Delay - If Equipped
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE on when windshield wipers are on may be found on When exiting the vehicle the driver can choose to have vehicles equipped with an automatic headlight system. the headlights remain on for 30, 60 or 90 seconds or not remain on.
Page 229: Lights-On Reminder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 Lights-On Reminder Front Fog Lights — If Equipped If the headlights or the parking lights are left on, or if the dimmer control is in the extreme top position after the To activate the front fog lights, turn on the ignition switch is turned OFF, a chime will sound when parking lights or the low beam headlights and the driver’s door is opened.
Page 230: Dimmer Controls
228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dimmer Controls Interior Lighting On The dimmer switch is located next to the headlight Rotate the left dimmer control completely upward to the switch. second detent (extreme top position) to turn on the interior lights.
Page 231 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 NOTE: The ignition must be cycled to the OFF position for this feature to operate. Interior Lighting Off Rotate the left dimmer control to the off position (extreme bottom). The interior lights will remain off when the doors or liftgate are open.
Page 232: Multifunction Lever
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Multifunction Lever The multifunction lever controls the: • Turn Signals The multifunction lever is located on the left side of the steering column. • Headlight Beams Low/High • Flash-To-Pass • Front and Rear Wipers — Washer Functions Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show...
Page 233: Lane Change Assist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 Turn Signal Warning Flash-To-Pass If the vehicle electronics sense that the vehicle has You can signal another vehicle with your headlights by traveled at over 18 mph (29 km/h) for about 1 mile lightly pulling the multifunction lever toward you.
Page 234: Windshield Wiper And Washers
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPER AND WASHERS NOTE: Always remove any buildup of snow that pre- vents the windshield wiper blades from returning to the The wipers and washers are operated by a switch within off position. If the windshield wiper switch is turned off the multifunction lever.
Page 235: Intermittent Wiper System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 Intermittent Wiper System Windshield Washers Use the intermittent wiper when weather conditions To use the Washer, push on the end of the lever to the make a single wiping cycle with a variable pause be- second detent and hold while spray is desired.
Page 236: Rear Wiper And Washer
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Wiper And Washer The sensitivity of the system is adjustable from the multifunction lever. Wiper sensitivity position 3 has been Rotating the rotary ring to the first detent activates the calibrated for best overall wiping sensitivity. If the opera- rear intermittent wipers.
Page 237 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 • The Rain Sensing feature can be turned on and off • Neutral Wipe Inhibit — The Rain Sensing feature will through the EVIC (if equipped). Refer to “Electronic not operate when the ignition is ON, and the transmis- Vehicle Information Center (EVIC)/Personal Settings sion shift lever is in the NEUTRAL position, and the (Customer-Programmable Features)”...
Page 238: Tilt/Telescoping Steering Column
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TILT/TELESCOPING STEERING COLUMN To unlock the steering column, push the lever downward (toward the floor). To tilt the steering column, move the This feature allows you to tilt the steering column steering wheel upward or downward as desired. To upward or downward.
Page 239: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 • Press the heated steering wheel button HEATED STEERING WHEEL — IF EQUIPPED once to turn the heating element On. The steering wheel contains a heating element that helps • Press the heated steering wheel button warm your hands in cold weather.
Page 240: Adjustable Pedals - If Equipped
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE and clutch pedals (if equipped) to move toward or away WARNING! from the driver to provide improved position with the • Persons who are unable to feel pain to the skin steering wheel. because of advanced age, chronic illness, diabetes, The switch is located on the left side of the steering spinal cord injury, medication, alcohol use, exhaus-...
Page 241 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 Press the switch forward to move the pedals forward NOTE: (toward the front of the vehicle). • Always adjust the pedals to a position that allows full Press the switch rearward to move the pedals rearward pedal travel.
Page 242: Electronic Speed Control - If Equipped
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the CAUTION! right side of the steering wheel. Do not place any article under the adjustable pedals or impede its ability to move, as it may cause damage to the pedal controls.
Page 243: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 NOTE: In order to ensure proper operation, the Elec- WARNING! tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at Leaving the Electronic Speed Control system on the same time.
Page 244: To Deactivate
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h): A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the U.S.
Page 245: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 To Decrease Speed Metric Speed (km/h) • Pressing the SET (-) button once will result in a 2 km/h When the Electronic Speed Control is set, you can de- crease speed by pushing the SET (-) button. decrease in set speed.
Page 246: Parksense® Rear Park Assist - If Equipped
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Electronic Speed Control system maintains PARKSENSE® REAR PARK ASSIST — IF speed up and down hills. A slight speed change on EQUIPPED moderate hills is normal. The ParkSense® Rear Park Assist system provides visual and audible indications of the distance between the rear On steep hills, a greater speed loss or gain may occur so fascia and a detected obstacle when backing up, e.g.
Page 247: Parksense® Sensors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 ParkSense® Sensors ParkSense® Warning Display The four ParkSense® sensors, located in the rear fascia/ The ParkSense® Warning screen will only be displayed if bumper, monitor the area behind the vehicle that is Sound and Display is selected from the Customer- within the sensors’...
Page 248: Parksense® Display
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense® Warning Display is located in the Instru- ParkSense® Display ment cluster’s EVIC display. It provides both visual and When the vehicle is in REVERSE, the warning display audible warnings to indicate the distance between the will turn ON indicating the system status.
Page 249 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 Park Assist System OFF Slow Tone The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Page 250 248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone.
Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than 79-39 in 39-25 in 25-12 in Less than (in/cm) 79 in (200 cm) (200-100 cm) (100-65 cm) (65-30 cm)
Page 252: Enabling/Disabling Parksense
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling/Disabling ParkSense® Service The ParkSense® Rear Park Assist System ParkSense® can be enabled and disabled through the Customer-Programmable Features section of the EVIC. During vehicle start up, when the ParkSense® Rear Park The available choices are: OFF, Sound Only, or Sound and Assist System has detected a faulted condition, the Display.
Page 253: Cleaning The Parksense® System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 • When you turn ParkSense® OFF, the instrument clus- Cleaning The ParkSense® System ter will display “PARK ASSIST SYSTEM OFF.” Fur- Clean the ParkSense® sensors with water, car wash soap thermore, once you turn ParkSense® off, it remains off and a soft cloth.
Page 254 252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Clean the ParkSense® sensors regularly, taking care CAUTION! not to scratch or damage them. The sensors must not • ParkSense® is only a parking aid and it is unable to be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not working recognize every obstacle, including small obstacles.
Page 255 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 WARNING! WARNING! (Continued) • Before using ParkSense®, it is strongly recom- • Drivers must be careful when backing up even mended that the ball mount and hitch ball assem- when using ParkSense®. Always check carefully bly is disconnected from the vehicle when the behind your vehicle, look behind you, and be sure vehicle is not used for towing.
Page 256: Parkview® Rear Back Up Camera - If Equipped
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKVIEW® REAR BACK UP CAMERA — IF out of REVERSE unless the forward vehicle speed ex- EQUIPPED ceeds 8 mph (13 km/h), the transmission is shifted into PARK or the vehicles ignition is cycled to the OFF Your vehicle may be equipped with the ParkView®...
Page 257 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 Zone Distance to the rear of the vehicle 0 - 1 ft (0 - 30 cm) Yellow 1 ft - 3 ft (30 cm - 1 m) Green 3 ft or greater (1 m or greater) WARNING! CAUTION! •...
Page 258: Overhead Consoles
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If snow, ice, mud, or any foreign substance builds up on the camera lens, clean the lens, rinse with water, and dry with a soft cloth. Do not cover the lens. OVERHEAD CONSOLES Front Overhead Console Two versions of the overhead console are available.
Page 259: Sunglass Storage (Non-Sunroof Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 If your vehicle is equipped with Remote Keyless Entry Sunglass Storage (Non-Sunroof Only) (RKE) the lights will also turn on when the UNLOCK At the front of the overhead console, a compartment is button on the RKE transmitter is pressed.
Page 260 258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The door will slowly rotate to the full open position. Conversation Mirror Position NOTE: From the “conversation mirror” position, the Full Open Position door can only be closed. From this position, the door can be fully closed or, by rotating upward about 3/4 of the way and releasing, To return to the full open position, the door must first be positioned for conversation mirror use.
Page 261: Rear Courtesy/Reading Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.
Page 262: Garage Door Opener - If Equipped
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Console Halo Lighting The rear overhead console has recessed halo lighting around the perimeter of the console base. This feature provides additional lighting options while traveling and is controlled by the headlight switch. Refer to “Lights/ Halo Lights —...
Page 263 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 The HomeLink® buttons, located on either the overhead console, headliner or sunvisor, designate the three differ- ent HomeLink® channels. The HomeLink® indicator is located above the center button. HomeLink® Buttons/Sunvisor/Headliner NOTE: HomeLink® is disabled when the Vehicle Secu- rity Alarm is active.
Page 264: Before You Begin Programming Homelink
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Before You Begin Programming HomeLink® NOTE: • Erasing all channels should only be performed when Be sure that your vehicle is parked outside of the garage before you begin programming. programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 265 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pro- gram while keeping the HomeLink® indicator light in view.
Page 266 264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. At the garage door opener motor (in the garage), To program the remaining two HomeLink® buttons, locate the “LEARN” or “TRAINING” button. This can repeat each step for each remaining button. DO NOT usually be found where the hanging antenna wire is erase the channels.
Page 267: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Programming A Non-Rolling Code 5. Press and hold the programmed HomeLink® button and observe the indicator light. For programming Garage Door Openers manufactured • If the indicator light stays on constantly, program- before 1995. ming is complete and the garage door/device should 1.
Page 268: Canadian/Gate Operator Programming
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Without releasing the button proceed with “Program- 1. Cycle the ignition to the ON/RUN position. ming A Non-Rolling Code” step 2 and follow all 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) remaining steps.
Page 269: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 5. Press and hold the programmed HomeLink® button 3. Without releasing the button proceed with “Canadian/ and observe the indicator light. Gate Operator Programming” step 2 and follow all • If the indicator light stays on constantly, program- remaining steps.
Page 270: Troubleshooting Tips
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The HomeLink® Universal Transceiver is disabled when WARNING! the Vehicle Security Alarm is active. Vehicle exhaust contains carbon monoxide, a danger- Troubleshooting Tips ous gas. Do not run your vehicle in the garage while If you are having trouble programming HomeLink®, programming the transceiver.
Page 271: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 NOTE: WARNING! (Continued) • The transmitter has been tested and it complies with use a garage door opener without these safety fea- FCC and IC rules. Changes or modifications not ex- tures. Call toll-free 1–800–355–3515 or, on the Internet pressly approved by the party responsible for compli- at www.HomeLink.com for safety information or ance could void the user’s authority to operate the...
Page 272: Power Sunroof - If Equipped
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located between the sun • Never leave children alone in a vehicle, or with visors on the overhead console. access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle or in a location accessible to children.
Page 273: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 Opening Sunroof — Express position. The sunroof will close fully and stop automati- cally. This is called “Express Close”. During Express Press the switch rearward and release it within one-half Close operation, any movement of the switch will stop second.
Page 274: Venting Sunroof - Express
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If three consecutive sunroof close attempts result Wind Buffeting in Pinch Protect reversals, the fourth close attempt will be Wind buffeting can be described as the perception of a Manual Close movement with Pinch Protect disabled. pressure on the ears or a helicopter-type sound in the ears.
Page 275: Ignition Off Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 Ignition Off Operation directly to the battery. The driver-side power outlet will also operate a conventional cigar lighter unit (if equipped For Vehicles Not Equipped With The Electronic Vehicle with an optional Smoker’s Package). Information Center (EVIC) The power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK...
Page 276 274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. •...
Page 277 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 The outlet in the rear quarter panel near the liftgate and the upper outlet in the instrument panel are both con- trolled by the ignition switch. Each of these outlets can support 160 Watts (13 Amps). Do not exceed 160 Watts (13 Amps) for each of these outlets.
Page 278 276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 279: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 CAUTION! CAUTION! (Continued) • Power outlets are designed for accessory plugs • Many accessories that can be plugged in draw only. Do not hang any type of accessory or acces- power from the vehicle’s battery, even when not in sory bracket from the plug.
Page 280 278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts. Certain high-end video games, such as Play- station3 and XBox360 will exceed this power limit, as will most power tools.
Page 281: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 Instrument Panel Cupholders WARNING! The instrument panel cupholders are located in a pull-out To avoid serious injury or death: drawer just above the lower storage bin. • Do not insert any objects into the receptacles. •...
Page 282: Super Console - If Equipped
280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE variety of container types and sizes. Press down on the For rear passengers two cupholders are located in the container to engage the cupholder retention features. pull-out drawer, located in the back of the Super Console. Pull the drawer out to the first position to use the Super Console —...
Page 283: Premium Console Cupholders - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 Premium Console Cupholders — If Equipped Interior Bottle Holders On models equipped with premium center consoles, There are four bottle holders located in the interior. One there are four cupholders located on the top of the bottle holder is molded into each front interior door trim console.
Page 284: Smoker's Package Kit - If Equipped
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Smoker’s Package Kit — If Equipped With the optional authorized dealer-installed Smoker’s Package Kit, a removable ash receiver is inserted into one of the two cupholders in the center front instrument panel. To install the ash receiver, align the receiver so the thumb grip on the lid is facing rearward.
Page 285: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 STORAGE Upper Glove Compartment To open the upper compartment, press in on the button, Glove Compartments located on the left side of the upper door. The door will Upper and lower glove compartments are located on the automatically open.
Page 286: Door Trim Panel Storage
284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lower Glove Compartment Door Trim Panel Storage To open the lower compartment pull out on the release Front Door Storage handle. Both interior front door panels have multiple pockets for storage. Driver Seatback Storage — If Equipped The driver’s seatback has a primary storage pocket on all models and an optional secondary mesh pocket.
Page 287: Umbrella Holder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 Umbrella Holder An umbrella holder has been conveniently molded into the left front door entry scuff molding. Driver’s Seatback Storage 1 — Bag Holder 2 — Standard Pocket 3 — Mesh Pocket Umbrella Holder...
Page 288: Second Row Seat Storage Bins - If Equipped
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Second Row Seat Storage Bins — If Equipped The seat storage bins are located on the floor in front of the second row seats. The area below the covers can be used for storage when the second row seat is in the upright position.
Page 289: Storage Bin Safety Warning
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 WARNING! WARNING! • Always close the storage bin covers when your In a collision, serious injury could result if the seat storage bin covers are not properly latched. vehicle is unattended. • Do not drive the vehicle with the storage bin covers •...
Page 290 288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! The storage bin cover must be flat and locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. Seat Storage Bin Cover Emergency Release Lever As a security measure, the Seat Storage Bin Cover has an Emergency Release Lever built into the latching mecha- nism.
Page 291: Coat Hooks
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 Coat Hooks Coat hooks are located along the headliner for the second and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage from the vehicle.
Page 292: Console Features
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The cupholders are removable to access a large storage CONSOLE FEATURES bin. There are three consoles available: Basic, Premium and • The basic console is removable from the vehicle for Super. additional floor space by removing the cap and clip at WARNING! the console base.
Page 293: Premium Console - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 • Four cupholders with dishwasher safe liners for clean- 3. Align the console until the front anchor cup plug hole is centered on the winch hole. ing. The cupholders can accept plastic bottles, large cups or mugs with handles 4.
Page 294 292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The top and center console sections slide forward and rearward to provide added user comfort. A one-piece cup holder insert for both cavities can easily be removed for cleaning. The cupholders will also accommodate large size cups and 20 oz (.6 L) bottles.
Page 295 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 Position 2 shows the raised storage tray revealing a large Dual Storage Bins storage area below. Position 3 shows the top portion of the console in a rearward position. This is accomplished by lifting the upper most latch at the front of the console.
Page 296 294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Position 4 shows the complete console in its rearmost To Remove The Premium Floor Console position. Again, lifting second latch handle at the front of 1. Pull up on the bottom release handle in the front of the the console, allows complete access to a lower storage bin console.
Page 297: Super Console - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 4. Push down on the rear of the console until it is seated in the rear floor bracket. 5. Pull up on the console to be sure it is firmly latched. WARNING! In an accident, serious injury could result if the removable floor console is not properly installed.
Page 298 296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The front cupholder light ring and pass through lighting is controlled by a dimming switch located on the instrument panel, refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information. Located in the back of the super console is a storage drawer and cupholders for the rear passengers.
Page 299: Cargo Area Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 297 CARGO AREA FEATURES Rechargeable Flashlight The rechargeable flashlight is mounted on the right side of the cargo area. The flashlight snaps out of the bezel when needed. The flashlight features two bright LED light bulbs and is powered by a lithium battery that recharges when snapped back into place and the vehicle is either running or the key is in the accessory position.
Page 300: Rear Window Features
298 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To operate the flashlight, press the switch once for high, REAR WINDOW FEATURES twice for low, and a third time to return to off. Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob.
Page 301 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 299 A hydraulic pump contained within the shock absorbers CAUTION! raises the rear of the vehicle to the correct height. It takes approximately 1 mile (1.6 km) of driving for the leveling Failure to follow these cautions can cause damage to to complete depending on road surface conditions.
Page 302 300 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • Crossbars are error-proofed and cannot be deployed or stowed in the incorrect positions. • To help control wind noise, stow the crossbars in the side rails when they are not in use. Deploying The Crossbars To deploy the crossbars, completely loosen the thumb screws at both ends of the crossbar and lift the crossbar...
Page 303 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 301 Bend the crossbar supports at each end, taking care to keep hand clear of pivoting joint. Slide the thumb screw down. Loosening Crossbars CAUTION! Stowed Position Use care when removing and handling the crossbars to prevent damage to the vehicle.
Page 304 302 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then, position the crossbars across the roof. NOTE: The crossbars are identical and can be placed in any two of the three deploy positions. Deployed Position Deploy Positions – Choose Two Of Three...
Page 305 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 303 Make sure the directional arrows on the crossbars align with the directional arrows on the side rails. Set the crossbars into the deployed positions. Tightening Crossbar Stowing The Crossbars Reverse the procedure to stow the crossbars, again, Crossbar To Side Rail Installation taking care to keep hand clear of pivoting joint.
Page 306 304 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Load should always be secured to crossbars first, CAUTION! with rail tie down loops used as additional securing • Check deployed crossbars frequently and retighten points if needed. Tie loops are intended as supplemen- tary tie down points only.
Page 307 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 305 CAUTION! (Continued) WARNING! • Long loads which extend over the windshield, such Cargo must be securely tied before driving your as wood panels or surfboards, or loads with large vehicle. Improperly secured loads can fly off the frontal area should be secured to both the front and vehicle, particularly at high speeds, resulting in per- rear of the vehicle.
Page 308 306 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sun Screen Retracted Sun Screen Extended Gently pull up on the tab to raise the sun screen. To lower the sun screen, gently lift the tab upward to Continue pulling the sun screen until the tab is near the disengage the hooks, and feed the screen back into the top of the window.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ EVIC Red Telltale Lights ....334 INSTRUMENT PANEL FEATURES ..311 ▫ Oil Change Required ....337 INSTRUMENT CLUSTER —...
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Customer-Programmable Features ▫ Operating Instructions — Radio Mode..360 (System Setup) ..... . .343 ▫...
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 ▫ Controlling The iPod® Or External USB Device ▫ Play A DVD Using The Touchscreen Radio . . .390 Using Radio Buttons ....378 ▫...
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Headphones Operation ....407 CLIMATE CONTROLS ....434 ▫...
Page 313: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 311 INSTRUMENT PANEL FEATURES 1 — Air Vents 5 — Upper Glove Compartment 9 — Storage Bin 13 — Hood Release 2 — Instrument Cluster 6 — Lower Glove Compartment 10 — Cup Holders 14 — Dimmer Switch 3 —...
Page 314: Instrument Cluster - Base
312 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — BASE...
Page 315: Instrument Cluster - Premium
UNDERSTANDING YOUR INSTRUMENT PANEL 313 INSTRUMENT CLUSTER — PREMIUM...
Page 316: Instrument Cluster Descriptions
314 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 4. Turn Signal Indicators 1. Tachometer The arrow will flash with the exterior turn signal when the turn signal lever is operated. This gauge measures engine revolutions per minute (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage.
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 6. Odometer Display/Electronic Vehicle Information This also displays Trip A and Trip B, DTE, MPG or Center (EVIC) Display — If Equipped L/100km, OAT (Outside Air Temperature) information to Base Cluster, use STEP and RESET button (on steering Odometer Display / Trip Odometer Display The odom- wheel) to access or reset the display.
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL message. If the problem continues, the message will LoCOOL ..... . . Low Coolant appear the next time the vehicle is started. NOTE: Some of the above warnings will be displayed in noFUSE the Electronic Vehicle Information Center Display Area...
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 Unless reset, this message will continue to display each instrument cluster. For further information, refer to time you turn the ignition switch to the ON/RUN “Electronic Vehicle Information Center (EVIC)” in this position. To reset the oil change indicator system (after section.
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL 8. Tire Pressure Monitoring Telltale Light — If Equipped reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Each tire, including the spare (if provided), Please note that the TPMS is not a substitute for proper should be checked monthly when cold and in- tire maintenance, and it is the driver’s responsibility to flated to the inflation pressure recommended by...
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 alternate tires or wheels on the vehicle that prevent the 9. Malfunction Indicator Light (MIL) TPMS from functioning properly. Always check the The Malfunction Indicator Light (MIL) is part of TPMS malfunction telltale after replacing one or more an Onboard Diagnostic system, called OBD, that tires or wheels on your vehicle, to ensure that the monitors engine and automatic transmission con-...
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Electronic Stability Control (ESC) Activation/ CAUTION! Malfunction Indicator Light — If Equipped Prolonged driving with the Malfunction Indicator The “ESC Activation/Malfunction Indicator Light (MIL) on could cause damage to the engine Light” in the instrument cluster will come on control system.
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 NOTE: 12. Speedometer • The “ESC Off Indicator Light” and the “ESC Indicates vehicle speed. Activation/Malfunction Indicator Light” come on 13. Fuel Door Reminder momentarily each time the ignition switch is turned to ON/RUN. The arrow in this symbol is a reminder that the Fuel Filler Door is located on the left side of the •...
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL dealer as soon as possible. Refer to “Occupant Restraints” 17. Vehicle Security Light — If Equipped in “Things To Know Before Starting Your Vehicle” for This light will flash at a fast rate for approxi- further information.
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 In this case, the light will remain on until the condition WARNING! has been corrected. If the problem is related to the brake booster, the ABS pump will run when applying the brake Driving a vehicle with the red brake light on is and a brake pedal pulsation may be felt during each stop.
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL The light also will turn on when the parking brake is 20. Temperature Gauge applied with the ignition switch in the ON/RUN posi- The temperature gauge shows engine coolant tempera- tion. ture. Any reading within the normal range indicates that NOTE: This light shows only that the parking brake is the engine cooling system is operating satisfactorily.
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 briefly as a bulb check. If the light stays on or comes on WARNING! while driving, turn off some of the vehicle’s non-essential electrical devices or increase engine speed (if at idle). If A hot engine cooling system is dangerous. You or the charging system light remains on, it means that the others could be badly burned by steam or boiling vehicle is experiencing a problem with the charging...
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL 24. Engine Temperature Warning Light 25. Electronic Throttle Control (ETC) Light This light warns of an overheated engine condi- This light informs you of a problem with the tion. As engine coolant temperatures rise and the Electronic Throttle Control (ETC) system.
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 26. Transmission Temperature Warning Light CAUTION! During sustained high speed driving or trailer Continuous driving with the Transmission Tempera- towing up long grades on hot days, the auto- ture Warning Light illuminated will eventually cause matic transmission oil may become too hot.
Page 330: Electronic Vehicle Information Center (Evic) - If Equipped
328 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER This system conveniently allows the driver to select a (EVIC) — IF EQUIPPED variety of useful information by pressing the switches mounted on the steering wheel. The EVIC consists of the The Electronic Vehicle Information Center (EVIC) fea- following: tures a driver-interactive display that is located in the...
Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 The system allows the driver to select information by UP Button pressing the following buttons mounted on the steering Press and release the UP button to scroll up- wheel: ward through the main menus (Fuel Economy, Vehicle Info, Tire PSI, Cruise, Messages, Units, System Setup) and sub-menus.
Page 332: Electronic Vehicle Information Center (Evic) Displays
330 UNDERSTANDING YOUR INSTRUMENT PANEL BACK Button The main display area will normally display the main menu or the screens of a selected feature of the main Press the BACK button to scroll back to a menu. The main display area also displays pop up previous menu or sub-menu.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 • Unstored Messages When the appropriate conditions exist, the EVIC displays the following messages: This message type is displayed indefinitely or until the • Key in ignition condition that activated the message is cleared. Examples of this message type are Turn Signal On (if a turn signal •...
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL • Wrong Key • Turn Signal On • Damaged Key • RKE Battery Low • Key not programmed • Low Washer Fluid • Vehicle Not in Park • Oil Change Required • Press Brake Pedal and Push Button to Start •...
Page 335: Evic White Telltale Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 333 • Blind Spot System Not Available — This message is • Electronic Range Select (ERS) Status displayed to indicate the Blind Spot Monitor (BSM) The shift lever status “5,4,3,2,1” are displayed indicating system is temporarily unavailable due to sensor block- the shift lever position.
Page 336: Evic Amber Telltale Lights
334 UNDERSTANDING YOUR INSTRUMENT PANEL EVIC Amber Telltale Lights If the message continues to appear for more than three days after tightening the gas cap, have the vehicle This area will show reconfigurable amber caution tell- serviced by an authorized service center immediately. tales.
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 • Oil Pressure Warning Light the charging system light remains on, it means that the vehicle is experiencing a problem with the charging This light indicates low engine oil pressure. The system. Obtain SERVICE IMMEDIATELY. See an autho- light should turn on momentarily when the engine is rized dealer.
Page 338 336 UNDERSTANDING YOUR INSTRUMENT PANEL If the light remains lit with the engine running, your shift the transmission into NEUTRAL and idle the ve- vehicle will usually be drivable. However, see an autho- hicle. If the temperature reading does not return to rized dealer for service as soon as possible.
Page 339: Oil Change Required
UNDERSTANDING YOUR INSTRUMENT PANEL 337 Unless reset, this message will continue to display each WARNING! time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and If you continue operating the vehicle when the release the Menu button.
Page 340: Fuel Economy
338 UNDERSTANDING YOUR INSTRUMENT PANEL Fuel Economy Press and release the UP or DOWN button until “Fuel Economy” displays highlighted in the EVIC and press the SELECT button. The following Fuel Economy func- tions display in the EVIC: • Average Fuel Economy (AVG) •...
Page 341: Vehicle Speed
UNDERSTANDING YOUR INSTRUMENT PANEL 339 NOTE: Significant changes in driving style or vehicle RIGHT arrow button. Press the RIGHT arrow button to loading will greatly affect the actual drivable distance of display the current speed in mph or km/h. Pressing the the vehicle, regardless of the DTE displayed value.
Page 342: Units
340 UNDERSTANDING YOUR INSTRUMENT PANEL Trip B units of measure. To make your selection, scroll up or down until the preferred setting is highlighted, then Shows the total distance traveled for Trip B since the last press and release the SELECT button until a check-mark reset.
Page 343: Messages
UNDERSTANDING YOUR INSTRUMENT PANEL 341 • Engine Hours NOTE: The system will display the last known outside temperature when starting the vehicle and may need to Displays the number of hours of engine operation. be driven several minutes before the updated tempera- Messages # ture is displayed.
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: A good calibration requires a level surface and 4. Press and release the SELECT button to start the an environment free from large metallic objects such as calibration. The “CAL” indicator will be displayed in buildings, bridges, underground cables, railroad tracks, the EVIC.
Page 345: Customer-Programmable Features
UNDERSTANDING YOUR INSTRUMENT PANEL 343 NOTE: Keep magnetic materials away from the top of 1. Turn the ignition switch ON. the instrument panel, such as iPod’s, Mobile Phones, 2. Press the UP or DOWN button until the Setup Laptops and Radar Detectors. This is where the compass (Customer-Programmable Features) menu is reached, module is located, and it can cause interference with the then press the SELECT button.
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL message SYSTEM SETUP NOT AVAILABLE VEHICLE Nav–Turn By Turn NOT IN PARK displays when you try to select “System When this feature is selected the navigation system Setup” from the main menu. utilizes voice commands, guiding you through the drive Press and release the UP or DOWN button until System route mile by mile, turn-by-turn until the final destina- Setup is highlighted in the main menu of the EVIC.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 PARK or NEUTRAL position and the driver’s door is RKE Linked To Memory- If Equipped opened. To make your selection, press and release the When this feature is selected the memory seat, mirror, Right arrow button until a check-mark appears next to and radio settings will return to the memory set position the feature showing the system has been activated, or the when the RKE transmitter UNLOCK button is pressed.
Page 348 346 UNDERSTANDING YOUR INSTRUMENT PANEL These features will stay on through the duration of make your selection, press and release the RIGHT arrow remote start or until the key is cycled to ON/RUN button until a check-mark appears next to the feature position.
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 then press and release the SELECT button until a check- Key-Off Power Delay mark appears next to the setting, showing that the setting When this feature is selected, the power window has been selected. switches, radio, Uconnect® phone (if equipped), DVD video system (if equipped), power sunroof (if equipped), Headlamps With Wipers (Available With Auto and power outlets will remain active for up to 10 minutes...
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL highlighted, then press and release the SELECT button Keyless Enter-N-Go™ (Passive Entry) until a check-mark appears next to the setting, showing This feature allows you to lock and unlock the vehicle’s that the setting has been selected. door(s) without having to press the RKE transmitter lock or unlock buttons.
Page 351: Uconnect® 730N/430/430N Cd/Dvd/Hdd/Nav
UNDERSTANDING YOUR INSTRUMENT PANEL 349 NOTE: The seat will return to the memorized seat Uconnect® 730N/430/430N CD/DVD/HDD/NAV — location (if Recall Memory with Remote Key Unlock is set IF EQUIPPED to ON) when the RKE transmitter is used to unlock the Refer to your Uconnect®...
Page 352: Uconnect® 130
350 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® 130 Power Switch/Volume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 remain tuned to the new station until you make another 5. To exit, press any button/knob, or wait five seconds. selection. Holding either button will bypass stations with- RW/FF out stopping, until you release it. Pressing the RW (Rewind) or FF (Fast Forward) buttons TIME Button causes the tuner to search for the next frequency in the...
Page 354 352 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the AM/FM Button mid-range tones.
Page 355: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 353 You may add a second station to each pushbutton by Operation Instructions — CD MODE For CD And repeating the above procedure with this exception: Press MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
Page 356 354 UNDERSTANDING YOUR INSTRUMENT PANEL If you insert a disc with the ignition ON and the radio CAUTION! (Continued) ON, the unit will switch from radio to CD mode and • Dual-media disc types (one side is a DVD, the begin to play when you insert the disc.
Page 357: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 355 SEEK Button AM/FM Button Press the right SEEK button for the next selection on the Press the button to select either AM or FM mode. CD. Press the left SEEK button to return to the beginning SET/RND Button (Random Play Button) of the current selection, or return to the beginning of the Press this button while the CD is playing to activate...
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) display the file name and folder name, and will assign a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.
Page 359 UNDERSTANDING YOUR INSTRUMENT PANEL 357 Supported MP3 File Formats MPEG Specifi- Sampling Fre- Bit Rate (kbps) cation quency (kHz) The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 MPEG-1 Audio 48, 44.1, 32 320, 256, 224, extension may cause playback problems.
Page 360: Operation Instructions - Auxiliary Mode
358 UNDERSTANDING YOUR INSTRUMENT PANEL Playback Of MP3 Files To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a When a medium containing MP3 data is loaded, the single-session disc, enable the “Disc at Once” option radio checks all files on the medium.
Page 361: Uconnect® 130 With Satellite Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 359 Pressing the DISC/AUX button will change the mode to Uconnect® 130 WITH SATELLITE RADIO auxiliary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to proper level. If the AUX audio is not loud enough, turn the device’s volume up.
Page 362: Operating Instructions - Radio Mode
360 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode SEEK Buttons Press and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON/RUN or listenable station in AM/FM mode. Press the right switch ACC position to operate the radio.
Page 363 UNDERSTANDING YOUR INSTRUMENT PANEL 361 If your vehicle is not equipped with or this feature is not Clock Setting Procedure available on your vehicle, a “Not Equipped With 1. Press and hold the TIME button until the hours blink. Uconnect Phone” message will display on the radio screen.
Page 364 362 UNDERSTANDING YOUR INSTRUMENT PANEL starting at step 2. For vehicles not equipped with satellite Setting The Tone, Balance And Fade radio, press the SETUP button and then follow the above Push the rotary TUNE/SCROLL control knob and BASS procedure, starting at step 2. will display.
Page 365 UNDERSTANDING YOUR INSTRUMENT PANEL 363 Push the rotary TUNE/SCROLL control knob a fifth time Toggle the MUSIC TYPE button to select the following and FADE will display. Turn the TUNE/SCROLL control format types: knob to the left or right to adjust the sound level between 16-Digit Character the front and rear speakers.
Page 366 364 UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type icon is 16-Digit Character Program Type displayed, the radio will be tuned to the next frequency Display station with the same selected Music Type name. The Oldies Oldies Music Type function only operates when in the FM mode.
Page 367 UNDERSTANDING YOUR INSTRUMENT PANEL 365 AM/FM Button display window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM Press the button to select either AM or FM mode. and 12 FM stations to be stored into pushbutton memory.
Page 368: Operation Instructions - Cd Mode For Cd
366 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON/RUN and the MP3 Audio Play radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display NOTE: will show the track number, and index time in minutes •...
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 SEEK Button CAUTION! (Continued) Press the right SEEK button for the next selection on the • Dual-media disc types (one side is a DVD, the CD. Press the left SEEK button to return to the beginning other side is a CD) should not be used, and they can of the current selection, or return to the beginning of the cause damage to the player.
Page 370: Notes On Playing Mp3 Files
368 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button Supported Media (Disc Types) Press the button to select either AM or FM mode. The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate Random Play.
Page 371 UNDERSTANDING YOUR INSTRUMENT PANEL 369 • Maximum number of folders. (The radio display of file writing are most likely multi-session discs. The use of names and folder names is limited. For large numbers of multi-session for CD audio or MP3 playback may result files and/or folders, the radio may be unable to display in longer disc loading times.
Page 372 370 UNDERSTANDING YOUR INSTRUMENT PANEL Playback Of MP3 Files MPEG Specifi- Sampling Fre- Bit Rate (kbps) cation quency (kHz) When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium MPEG-1 Audio 48, 44.1, 32 320, 256, 224, contains a lot of folders or files, the radio will take more...
Page 373: List Button - Cd Mode For Mp3 Play
UNDERSTANDING YOUR INSTRUMENT PANEL 371 To increase the speed of disc loading, it is recommended Press the INFO button once more to return to elapsed to use CD-R media and single-session discs. To create a time priority mode. single-session disc, enable the “Disc at Once” option Press and hold the INFO button for three seconds or before writing to the disc.
Page 374: Uconnect® (Satellite Radio) - If Equipped
372 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The AUX device must be turned on and the NOTE: Sirius service is not available in Hawaii and has device’s volume set to the proper level. If the AUX audio limited coverage in Alaska. is not loud enough, turn the device’s volume up.
Page 375 UNDERSTANDING YOUR INSTRUMENT PANEL 373 Electronic Serial Number/Sirius Identification Selecting Uconnect® (Satellite) Mode Number (ESN/SID) Press the SAT button until SAT appears in the display. A Please have the following information available when CD may remain in the radio while in the Satellite radio calling: mode.
Page 376 374 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality SEEK Buttons Satellite reception may be interrupted due to one of the Press and release the SEEK buttons to search for the next following reasons: channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
Page 377 UNDERSTANDING YOUR INSTRUMENT PANEL 375 additional three seconds will make the radio display the Toggle the MUSIC TYPE button again to select the music Song Title all of the time (press and hold again to return type. to normal display). By pressing the SEEK button when the Music Type RW/FF function is active, the radio will be tuned to the next...
Page 378: Operating Instructions (Uconnect® Phone) - If Equipped
376 UNDERSTANDING YOUR INSTRUMENT PANEL SET Button — To Set The Pushbutton Memory Buttons 1 - 6 When you are receiving a channel that you wish to These buttons tune the radio to the channels that you commit to pushbutton memory, press the SET button. commit to pushbutton memory (12 Satellite stations).
Page 379: Connecting The Ipod® Or External Usb Device
UNDERSTANDING YOUR INSTRUMENT PANEL 377 This feature allows an iPod® or external USB device to be Connecting The iPod® Or External USB Device plugged into the USB port, located in the glove compart- Use the connection cable to connect an iPod® or external ment.
Page 380: Using This Feature
378 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The glove compartment will have a position Using This Feature where the iPod® or consumer electronic audio device By using an iPod® cable, or an external USB device to cable can be routed through without damaging the cable connect to the USB port: when closing the lid.
Page 381: Play Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 379 • Jump backward in the current track by pressing and MP3 control mode, audio tracks (if available from audio device) start playing over the vehicle’s audio system. holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current Play Mode track.
Page 382: List Or Browse Mode
380 UNDERSTANDING YOUR INSTRUMENT PANEL to the next screen of data for that track. Once all device, or press the VR button and say Shuffle ON or screens have been viewed, the last INFO button press Shuffle Off. If the RND icon is showing on the radio will go back to the play mode screen on the radio.
Page 383 UNDERSTANDING YOUR INSTRUMENT PANEL 381 • Preset 6 – Podcasts through the list faster. During fast scroll, a slight delay in updating the information on the radio display may • Pressing a PRESET button will display the current list be noticeable. on the top line and the first item in that list on the •...
Page 384: Bluetooth® Streaming Audio (Btsa)
382 UNDERSTANDING YOUR INSTRUMENT PANEL Bluetooth® Streaming Audio (BTSA) CAUTION! Music can be streamed from your cellular phone to the • Leaving the iPod® or external USB device (or any Uconnect® phone system. supported device) anywhere in the vehicle in ex- Controlling BTSA Using Radio Buttons treme heat or cold can alter the operation or dam- age the device.
Page 385: Uconnect® Multimedia - Video
UNDERSTANDING YOUR INSTRUMENT PANEL 383 Selecting A Different Audio Device Browse Browsing is not available on a Bluetooth® Streaming 1. Press the PHONE button to begin. Audio (BTSA) device. Only the current song that is 2. After the Ready prompt and following the beep, say playing will display info.
Page 386: Getting Started
384 UNDERSTANDING YOUR INSTRUMENT PANEL • Your vehicle may be equipped with either a standard Getting Started DVD player or a Blu-ray™ Disc Player. If equipped • Screen(s) located in the overhead console: Unfold the with a Blu-ray™ Disc Player, the icon will be present overhead LCD screen(s) by pushing the button on the on the Player.
Page 387: Blu-Ray™ Disc Player
UNDERSTANDING YOUR INSTRUMENT PANEL 385 • The system can be controlled by the front seat occu- Using The Touchscreen Radio pants using either the touchscreen radio, the DVD or • Press the MENU hard-key, then touch the Rear VES™ Blu-ray™ Disc Player, or by the rear seat occupants soft-key.
Page 388: Play Video Games
386 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • Due to the size of the content on a Blu-ray™ Disc, the disc may not start playing immediately. • Not all Blu-ray™, CD or DVD discs will automatically restart from where you left off at when turned off. Some discs will restart from the beginning, others will restart from where you left off at, and some will ask you if you would like to continue or start from the...
Page 389 UNDERSTANDING YOUR INSTRUMENT PANEL 387 When connecting an external source to the AUX input, be sure to follow the standard color coding for the VES™ jacks: NOTE: Certain high-end video games, such as Playsta- tion3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter.
Page 390 388 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Touchscreen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. Touch the Rear VES™ soft-key to display the Rear VES™ Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES™ Con- trols screen.
Page 391: Listen To An Audio Source On Channel 2 While A
UNDERSTANDING YOUR INSTRUMENT PANEL 389 Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 Ensure the Remote Control and Headphone switch is on Channel 2. Using The Remote Control 1. Press the SOURCE button on the Remote Control and the Mode Select Screen will display, unless a video is playing then only a small banner will appear on the bottom of the screen.
Page 392: Dual Video Screen
390 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Touchscreen Radio Controls Play A DVD Using The Touchscreen Radio 1. Press the MENU hard-key on the radio faceplate. NOTE: Headunit DVD player does not play Blu-ray™ Discs. 2. Touch the Rear VES™ soft-key to display the Rear VES™...
Page 393 UNDERSTANDING YOUR INSTRUMENT PANEL 391 Using The Remote Control 1. Press the SOURCE button on the Remote Control. 2. While looking at Screen 1 or 2, highlight DISC by either pressing Up/Down/Left/Right buttons or by repeatedly pressing the SOURCE button, then press ENTER/OK.
Page 394 392 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mode information is shown on the right side of the screen. • The VES™ will retain the last setting when turned off. Using The Touchscreen Radio Controls 1.
Page 395: Play A Dvd Using The Ves™ Player - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 393 NOTE: Play A DVD Using The VES™ Player — If Equipped • To view a DVD on the radio press the RADIO/MEDIA hard-key, on the radio faceplate, then touch the DISC 1. Insert the DVD with the label facing up. The VES™ tab soft-key and then the VIEW VIDEO soft-key.
Page 396 394 UNDERSTANDING YOUR INSTRUMENT PANEL Using The Remote Control 1. Press the SOURCE button on the Remote Control. 2. While looking at Screen 1 or 2, highlight VES™ DISC by either pressing Up/Down/Left/Right buttons or by repeatedly pressing the SOURCE button, then press ENTER/OK on the Remote Control.
Page 397 UNDERSTANDING YOUR INSTRUMENT PANEL 395 NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mode information is shown on the right side of the screen. • The VES™ will retain the last setting when turned off. Using The Touchscreen Radio Controls 1.
Page 398: Play A Blu-Ray™ Disc Using The Blu-Ray™ Player - If Equipped
396 UNDERSTANDING YOUR INSTRUMENT PANEL • Viewing a DVD on the Touchscreen radio screen is not available in all states/provinces. If available, the ve- hicle must be stopped and the shift lever must be in the PARK position for vehicles with an automatic trans- mission.
Page 399 UNDERSTANDING YOUR INSTRUMENT PANEL 397 3. To watch a Blu-ray™ Disc on Screen 2 for third row Using The Touchscreen Radio Controls passengers, ensure the Remote Control and Head- 1. Press the MENU hard-key on the radio faceplate. phone switch is on Channel 2. 2.
Page 400: Listen To An Audio Source While A Video Is Playing
398 UNDERSTANDING YOUR INSTRUMENT PANEL • Viewing a Blu-ray™ Disc on the Touchscreen radio Using The Remote Control screen is not available in all states/provinces. If avail- 1. Press the SOURCE button on the Remote Control and able, the vehicle must be stopped and the shift lever the Select Mode Screen will display, unless a video is must be in the PARK position for vehicles with an playing then only a small banner will appear on the...
Page 401 UNDERSTANDING YOUR INSTRUMENT PANEL 399 Select FM Mode On The VES Screen Rear VES™ Soft-Key Using The Touchscreen Radio Controls 3. To listen to an audio source on Channel 2 while a video is playing on Channel 1, touch the 2 soft-key and 1.
Page 402: Important Notes For Dual Video Screen System
400 UNDERSTANDING YOUR INSTRUMENT PANEL • The Blu-ray™ Disc Player can play CDs, DVDs and Blu-ray™ Discs. • The DVD Player can play CDs and DVDs. • In split screen mode the left side equates to Channel 1 and the right side equates to Channel 2. •...
Page 403: Ves™ Remote Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 401 VES™ Remote Control — If Equipped audio while the screen is closed, press the Power button to turn the headphone transmitter on. 2. Channel Selector Indicators – When a button is pressed, the currently affected channel or channel button is illuminated momentarily.
Page 404 402 UNDERSTANDING YOUR INSTRUMENT PANEL – In radio modes, press to seek the next tunable 10. PROG Up/Down / Rewind/skip back and fast fwd/ station. In disc modes, press and hold to fast forward skip forward – When listening to a radio mode, through the current audio track or video chapter.
Page 405 UNDERSTANDING YOUR INSTRUMENT PANEL 403 13. STATUS – If Equipped – Press to display the current 16. BACK – When navigating in menu mode, press to status. return to the previous screen. When navigating a DVDs disc menu, the operation depends on the disc’s 14.
Page 406: Blu-Ray™ Player Remote Control - If Equipped
404 UNDERSTANDING YOUR INSTRUMENT PANEL Blu-ray™ Player Remote Control — If Equipped Controls And Indicators 1. Power – Turns the screen and wireless headphone transmitter for the selected Channel on or off. To hear audio while the screen is closed, press the Power button to turn the headphone transmitter on.
Page 407 UNDERSTANDING YOUR INSTRUMENT PANEL 405 6. SETUP – Press to access the Blu-ray™ Setup menu 11. KEYPAD – Press to navigate chapters or titles. screen. When a disc is loaded in the Blu-ray™ player 12. ▪ (Stop) – Stops disc play. (if equipped) and the VES™...
Page 408: Remote Control Storage
406 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Control Storage The video screen(s) come with a built in storage compart- ment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be very difficult to remove.
Page 409: Locking The Remote Control
UNDERSTANDING YOUR INSTRUMENT PANEL 407 • Replace the batteries, making sure to orient them Locking The Remote Control according to the polarity diagram shown. All remote control functionality can be disabled as a • Replace the battery compartment cover. parental control feature. •...
Page 410: Blu-Ray™ Headphones Operation
408 UNDERSTANDING YOUR INSTRUMENT PANEL Blu-ray™ Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves.
Page 411: Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 409 Controls The headphone power indicator and controls are located on the right ear cup. NOTE: The rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off.
Page 412: Replacing The Headphone Batteries
410 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: 4. When the Mode Selection menu appears on screen, use the cursor buttons on the remote control to navi- • When both switches are on Channel 1, the Remote is gate to the available modes and press the OK button to controlling Channel 1 and the headphones are tuned select the new mode.
Page 413: Unwired® Stereo Headphone Lifetime Limited
UNDERSTANDING YOUR INSTRUMENT PANEL 411 Unwired® Stereo Headphone Lifetime Limited TECHNOLOGY IS NOT LIABLE FOR ANY INJURIES Warranty OR DAMAGES TO PERSONS OR PROPERTY RESULT- ING FROM THE USE OF, OR ANY FAILURE OR DE- Who Does This Warranty Cover? This warranty covers FECT IN, THE PRODUCT, NOR IS UNWIRED LIABLE the initial user or purchaser ( you or your ) of this FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT,...
Page 414: System Information
412 UNDERSTANDING YOUR INSTRUMENT PANEL PRODUCTS, AND IS IN LIEU OF ALL OTHER WAR- 2 are in the same (shared) mode, a VES™ icon will be RANTIES (EXPRESS OR IMPLIED), INCLUDING ANY visible on the radio’s display for that channel, and the WARRANTY OR MERCHANTABILITY OR FITNESS shared icon will be visible on the VES™...
Page 415 UNDERSTANDING YOUR INSTRUMENT PANEL 413 When in shared disc mode both the radio and the VES™ Information Mode Display have control of the video functions. The VES™ has the ability to control the following video modes: 1. CD: Ability to Fast Forward, Rewind, Scan, and Track Up/Down.
Page 416 414 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Channel 2 Mode Numeric Keypad Menu 5. Channel 2 Shared Status 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER/OK Button Action 8. Channel 2 ENTER/OK Button Action 9. Clock 10. Video Lock 11. Not Available / Error Numeric Keypad Menu...
Page 417 UNDERSTANDING YOUR INSTRUMENT PANEL 415 When the display for either Channel 1 or Channel 2 Station List Menu shows DIRECT TUNE, pressing the remote control’s OK When listening to Satellite audio, pressing the remote button activates a numeric keypad menu. This screen control’s POP UP/MENU button displays a list of all makes it easy to enter a specific tuner frequency, satellite available channels.
Page 418 416 UNDERSTANDING YOUR INSTRUMENT PANEL Disc Menu Display Settings When watching a video source (DVD Video with the disc in Play mode, Aux Video, etc.), pressing the remote control’s SETUP button activates the Display Settings menu. These settings control the appearance of the video on the screen.
Page 419 UNDERSTANDING YOUR INSTRUMENT PANEL 417 Listening To Audio With The Screen Closed Disc Formats To listen to only audio portion of the channel with the The DVD player is capable of playing the following types screen closed: of discs (12 cm or 8 cm diameter): •...
Page 420 418 UNDERSTANDING YOUR INSTRUMENT PANEL The Blu-Ray™ Player is capable of the playing the end with the extension “.div”, “divx” or “.avi.” To following types of discs (12 cm diameter): prevent incorrect playback, do not use these extensions for any other types of files. •...
Page 421 UNDERSTANDING YOUR INSTRUMENT PANEL 419 • Minimum resolution 16 x 16 DVD Audio Support • Maximum frame rate for progressive source 30 When a DVD-Audio disc is inserted in the DVD player, frames per second the DVD-Audio title on the disc is played by default •...
Page 422 420 UNDERSTANDING YOUR INSTRUMENT PANEL • The player recognizes a maximum of 512 files and 99 If you record a disc using a personal computer, there may be cases where the DVD player may not be able to play folders per CD-R and CD-RW disc. some or the entire disc, even if it is recorded in a •...
Page 423 UNDERSTANDING YOUR INSTRUMENT PANEL 421 • Any file that is copy protected (such as those down- Compressed Audio Files (MP3 / WMA and ACC) loaded from many online music stores) will not play. The DVD/Blu-ray™ Player (if equipped) is capable of The DVD player will automatically skip the file and playing MP3 (MPEG-1 Audio Layer 3) and WMA (Win- begin playing the next available file.
Page 424 422 UNDERSTANDING YOUR INSTRUMENT PANEL • To change the current directory, use the remote con- The DVD player may shut down during extremely hot trol’s PROG UP and Down buttons or Rewind/skip conditions, such as when the vehicle’s interior tempera- back and fast fwd/skip forward.
Page 425 UNDERSTANDING YOUR INSTRUMENT PANEL 423 Display All of the Language settings have a special Other setting to accommodate languages other than Japanese or English. Other Language Setup These languages are selected using a special four-digit code. To enter a new language code, activate the DVD Setup Menu.
Page 426 424 UNDERSTANDING YOUR INSTRUMENT PANEL selecting the digit, press the remote control’s Right Rating And Password Setup cursor button to select the next digit. Repeat this digit The Rating and Password settings work together to selection sequence for all four digits. control the types of DVDs that your family watches.
Page 427 UNDERSTANDING YOUR INSTRUMENT PANEL 425 To play all discs without requiring a password, set the DVD player’s rating to Level 8. Setting the rating to Level 1 always requires the password to play any DVD disc. Not all DVD discs encode a Rating, so it is still possible that discs designed for adult audiences can still play without requiring a password.
Page 428 426 UNDERSTANDING YOUR INSTRUMENT PANEL • After the four-digit password is entered, press the To set the password, activate the DVD Setup Menu and follow these additional instructions: remote control’s ENTER/OK button. If the password is correct, the set password screen is displayed. •...
Page 429 UNDERSTANDING YOUR INSTRUMENT PANEL 427 To set the rating, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control’s Left and Right cursor buttons, select the Rating tab. • Highlight Change Rating , and then press the remote control’s ENTER/OK button.
Page 430 428 UNDERSTANDING YOUR INSTRUMENT PANEL • THIS PRODUCT IS LICENSED UNDER THE AVC Product Agreement PATENT PORTFOLIO LICENSE FOR THE PER- Software SONAL AND NON-COMMERCIAL USE OF A CON- This product contains software licensed under GNU SUMER TO (i) ENCODE VIDEO IN COMPLIANCE General Public License (GPL) or GNU Lesser General WITH THE AVC STANDARD ( AVC VIDEO ) Public License (LGPL), etc.
Page 431 UNDERSTANDING YOUR INSTRUMENT PANEL 429 AND/OR (ii) DECODE VC-1 VIDEO THAT WAS Center at http://www.cinavia.com. To request additional ENCODED BY A CONSUMER ENGAGED IN A PER- information about Cinavia by mail, send a postcard with SONAL NON-COMMERCIAL ACTIVITY your mailing address to: Cinavia Consumer Information AND/OR WAS OBTAINED FROM A VIDEO PRO- Center, P.O.
Page 432 430 UNDERSTANDING YOUR INSTRUMENT PANEL viewing uses only unless otherwise authorized by ABOUT DIVX VIDEO: DivX is a digital video format Macrovision. Reverse engineering or disassembly is created by DivX, LLC, a subsidiary of Rovi Corporation. prohibited. This is an official DivX Certified® device that plays DivX video.
Page 433: Steering Wheel Audio Controls - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 431 Trademark STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED • Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association. • Java is a registered trademark of Oracle and/or its affiliates. CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Page 434: Radio Operation
432 UNDERSTANDING YOUR INSTRUMENT PANEL The right-hand rocker switch has a pushbutton in the The button located in the center of the left-hand switch center, and controls the volume and mode of the sound will tune to the next preset station that you have pro- system.
Page 435: Cd/Dvd/Blu-Ray™ Disc Maintenance
UNDERSTANDING YOUR INSTRUMENT PANEL 433 CD/DVD/Blu-ray™ Disc MAINTENANCE NOTE: If you experience difficulty in playing a particular disc, it may be damaged (i.e., scratched, reflective coating To keep a CD/DVD/Blu-ray™ Disc in good condition, removed, a hair, moisture or dew on the disc) oversized, take the following precautions: or have protection encoding.
Page 436: Climate Controls
434 UNDERSTANDING YOUR INSTRUMENT PANEL CLIMATE CONTROLS The primary control for the rear blower is on the front climate control unit located on the instrument panel. The Climate Control system allows you to regulate the When the front control is in any position other than rear, temperature, amount, and direction of air circulating the front control operates all the rear functions.
Page 437 UNDERSTANDING YOUR INSTRUMENT PANEL 435 2. Rear Blower Control — If Equipped Use this control to regulate the amount of air forced through the rear system in any mode you select. The rear blower speed increases as you move the control to the right from the “O”...
Page 438 436 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Right Front Temperature Control NOTE: The air conditioning compressor may operate in Mix and Defrost, even if the A/C button is not pressed. Provides right front seat occupant with independent This dehumidifies the air to help dry the windshield. To temperature control.
Page 439 UNDERSTANDING YOUR INSTRUMENT PANEL 437 NOTE: CAUTION! (Continued) • You can turn off the heated mirror feature at anytime • Do not use scrapers, sharp instruments, or abrasive by pressing the rear window defroster switch a window cleaners on the interior surface of the second time.
Page 440 438 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: 10. Air Conditioning (A/C) Button • If the Recirculation button is pressed when the Press and release to change the current setting. system is in Defrost mode the Recirculation LED The indicator illuminates when ON. indicator will flash three times to indicate Recircula- tion mode is not allowed.
Page 441: Rear Manual Climate Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 439 12. Bi-Level Mode Button Economy Mode If ECONOMY mode is desired, press the A/C button to Air is directed through the panel and floor outlets. turn off the indicator light and the A/C compressor. Rotate the temperature control knob to the desired tem- NOTE: There is a difference in temperature (in any perature.
Page 442 440 UNDERSTANDING YOUR INSTRUMENT PANEL The rear blower and temperature controls for the rear Rear Blower Control seat passengers are located in the headliner, near the The primary control for the rear blower is on the front center of the vehicle. climate control unit, located on the instrument panel.
Page 443 UNDERSTANDING YOUR INSTRUMENT PANEL 441 Rear Mode Control CAUTION! (Continued) Headliner Mode just behind the sliding door. Do not block or place objects directly in front of the inlet grille or heater Air comes from the outlets in the headliner. Each outlets.
Page 444: Automatic Temperature Control (Atc) - If Equipped
442 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control (ATC) — If temperature, the airflow volume, amount of outside air Equipped recirculation and the airflow direction. This maintains a comfortable temperature, even under changing condi- • Front Three-Zone ATC allows both driver and front tions.
Page 445 UNDERSTANDING YOUR INSTRUMENT PANEL 443 1. Air Conditioning (A/C) Button 6. Auto Indicator Press and release to change the current Air Conditioning This indicates when the system is in Auto mode. (A/C) setting, the indicator illuminates when A/C is ON. 7.
Page 446 444 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Rear Control Button 13. Climate Control OFF Button Provides toggle operation between front control screen Press and release to turn the Climate Control OFF. If the and rear control screen. Push the button to activate the control is OFF, press any button to turn the control ON.
Page 447 UNDERSTANDING YOUR INSTRUMENT PANEL 445 17. SYNC Button Once the desired temperature is displayed, the system will achieve and automatically maintain that comfort Press and release to control the temperature setting for all level. three zones from the driver temperature control. 3.
Page 448 446 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioning (A/C) To provide you with maximum comfort in the automatic mode, during cold start-ups, the blower fan will remain The Air Conditioning (A/C) button allows the operator on low until the engine warms up. The fan will engage to manually activate or deactivate the air conditioning immediately if the Defrost mode is selected, or by chang- system.
Page 449 UNDERSTANDING YOUR INSTRUMENT PANEL 447 Controlling The Rear Climate Controls From The Front ATC Panel The Three-Zone ATC system allows for adjustment of the rear climate controls from the front ATC panel. To change the rear system settings: • Press REAR button to change control to rear control mode, Rear display (below) will appear.
Page 450 448 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Mode Display Bi-Level Mode This display shows the current Mode selection. Air comes from both the headliner outlets and the floor outlets. 2. Rear Temperature Display NOTE: In many temperature positions, the Bi-Level This display shows the temperature setting for the rear mode is designed to provide cooler air out of the head- seat occupants.
Page 451 UNDERSTANDING YOUR INSTRUMENT PANEL 449 The rear system temperature control is on the front ATC panel located on the instrument panel. Pressing the Rear Temperature Lock button on the front ATC panel, illuminates a lock symbol in the rear display. The rear temperature and air source are controlled from the front ATC panel.
Page 452 450 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Press the Rear Temperature Lock button on the front NOTE: ATC panel. This turns off the Rear Temperature Lock • It is not necessary to move the temperature settings for icon in the rear temperature knob. cold or hot vehicles.
Page 453 UNDERSTANDING YOUR INSTRUMENT PANEL 451 When rear controls are locked by the front system, the CAUTION! Rear Temperature Lock symbol on the temperature knob is illuminated and any rear overhead adjustments are Interior air enters the Rear Automatic Temperature ignored. Control System through an intake grille, located in the right side trim panel behind the third row seats.
Page 454: Summer Operation
452 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In many temperature positions, the Bi-Level Winter Operation mode is designed to provide cooler air out of the head- To ensure the best possible heater and defroster perfor- liner outlets and warmer air from the floor outlets. mance, make sure the engine cooling system is function- •...
Page 455: Window Fogging
UNDERSTANDING YOUR INSTRUMENT PANEL 453 Window Fogging A/C Air Filter Vehicle windows tend to fog on the inside in mild, rainy On vehicles equipped with Automatic Temperature Con- and/or humid weather. To clear the windows, select trol (ATC), the climate control system filters out dust and Defrost or Mix mode and increase the front blower speed.
Page 456: Operating Tips Chart
454 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips Chart...
Page 457: Starting And Operating
STARTING AND OPERATING CONTENTS ▫ Brake/Transmission Shift Interlock System . . .464 STARTING PROCEDURES ....459 ▫ Automatic Transmission ....459 ▫...
Page 458 456 STARTING AND OPERATING ▫ Tire Identification Number (TIN)...498 POWER STEERING .....478 ▫...
Page 459 STARTING AND OPERATING 457 ▫ Life Of Tire ......515 ▫ Materials Added To Fuel ....532 ▫...
Page 460 458 STARTING AND OPERATING ▫ Common Towing Definitions ... . .543 ADDING FUEL ......538 ▫...
Page 461: Starting Procedures
STARTING AND OPERATING 459 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Do not leave the key fob in or near the vehicle, or inside and outside mirrors, fasten your seat belt, and if in a location accessible to children.
Page 462: Extreme Cold Weather (Below -20°F Or −29°C)
460 STARTING AND OPERATING 3. If the engine fails to start, the starter will disengage If The Engine Fails To Start automatically in 10 seconds. If this occurs, turn the ignition switch to the OFF position, wait 10 to 15 WARNING! seconds, then repeat the “Normal Starting”...
Page 463: After Starting
STARTING AND OPERATING 461 If the engine has been flooded, it may start to run, but not WARNING! (Continued) have enough power to continue running when the key • If the vehicle has a discharged battery, booster fob is released. If this occurs, continue cranking with the cables may be used to obtain a start from a booster accelerator pedal pushed all the way to the floor.
Page 464: Engine Block Heater - If Equipped
462 STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED AUTOMATIC TRANSMISSION The engine block heater warms the engine, and permits CAUTION! quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a Damage to the transmission may occur if the follow- grounded, three-wire extension cord.
Page 465 STARTING AND OPERATING 463 WARNING! WARNING! (Continued) position, the transmission is locked in PARK, se- • It is dangerous to shift out of PARK or NEUTRAL curing the vehicle against unwanted movement. if the engine speed is higher than idle speed. If •...
Page 466: Key Ignition Park Interlock
464 STARTING AND OPERATING Key Ignition Park Interlock Brake/Transmission Shift Interlock System This vehicle is equipped with a Key Ignition Park Inter- This vehicle is equipped with a Brake Transmission Shift lock which requires the transmission to be in PARK Interlock System (BTSI) that holds the shift lever in PARK before the ignition switch can be turned to the full OFF unless the brakes are applied.
Page 467: Six-Speed Automatic Transmission
STARTING AND OPERATING 465 • The transmission will skip select gears during shifts to allow the engine to operate at lower speeds. • The torque converter clutch may engage at lower engine speeds and remain on longer. • The engine idle speed will be lower. •...
Page 468: Gear Ranges
466 STARTING AND OPERATING The electronically-controlled transmission provides a Only shift from DRIVE to PARK or REVERSE when the precise shift schedule. The transmission electronics are accelerator pedal is released and the vehicle is stopped. self-calibrating; therefore, the first few shifts on a new Be sure to keep your foot on the brake pedal when vehicle may be somewhat abrupt.
Page 469 STARTING AND OPERATING 467 PARK (P) WARNING! This range supplements the parking brake by locking the • Never use the PARK position as a substitute for the transmission. The engine can be started in this range. parking brake. Always apply the parking brake Never attempt to use PARK while the vehicle is in fully when parked to guard against vehicle move- motion.
Page 470 468 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL • When leaving the vehicle, always remove the Key if the engine speed is higher than idle speed. If Fob and lock your vehicle. •...
Page 471 STARTING AND OPERATING 469 The following indicators should be used to ensure that CAUTION! you have engaged the transmission into the PARK posi- • Before moving the shift lever out of PARK, you tion: must turn the ignition switch from the LOCK/OFF •...
Page 472 470 STARTING AND OPERATING NEUTRAL (N) CAUTION! (Continued) Use this range when the vehicle is standing for prolonged severe transmission damage. Refer to “Recreational periods with the engine running. The engine may be Towing” in “Starting And Operating” and “Towing A started in this range.
Page 473 STARTING AND OPERATING 471 lower gear range. Under these conditions, using a lower Transmission Limp Home Mode gear range will improve performance and extend trans- Transmission function is monitored electronically for mission life by reducing excessive shifting and heat abnormal conditions. If a condition is detected that could buildup.
Page 474 472 STARTING AND OPERATING 4. Wait approximately 10 seconds. the transmission into 3 (third gear), the transmission will not shift above third gear (except to prevent engine 5. Restart the engine. overspeed), but will shift down into second and first 6.
Page 475 STARTING AND OPERATING 473 WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. Transmis- sion Gear Position Display Actual 1–2 1–3 1–4...
Page 476 474 STARTING AND OPERATING NOTE: To select the proper gear position for maximum Torque Converter Clutch deceleration (engine braking), tap the shift lever to the A feature designed to improve fuel economy has been left (-) repeatedly as the vehicle slows. The transmission included in the automatic transmission on your vehicle.
Page 477: Driving On Slippery Surfaces
STARTING AND OPERATING 475 DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
Page 478: Driving Through Water
476 STARTING AND OPERATING DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Cautions safety and prevent damage to your vehicle.
Page 479 STARTING AND OPERATING 477 CAUTION! CAUTION! (Continued) • Driving through standing water may cause damage • Always check the depth of the standing water to your vehicle’s drivetrain components. Always before driving through it. Never drive through inspect your vehicle’s fluids (i.e., engine oil, trans- standing water that is deeper than the bottom of mission, axle, etc.) for signs of contamination (i.e., the tire rims mounted on the vehicle.
Page 480: Starting And Operating Power Steering
478 STARTING AND OPERATING POWER STEERING system. This noise should be considered normal, and it does not in any way damage the steering system. The standard power steering system will give you good vehicle response and increased ease of maneuverability CAUTION! in tight spaces.
Page 481: Parking Brake
STARTING AND OPERATING 479 PARKING BRAKE CAUTION! Before leaving the vehicle, make sure that the parking Do not use chemical flushes in your power steering brake is fully applied and place the shift lever in the system as the chemicals can damage your power PARK position.
Page 482 480 STARTING AND OPERATING NOTE: • When the parking brake is applied and the automatic transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle.
Page 483 STARTING AND OPERATING 481 WARNING! WARNING! (Continued) • Be sure the parking brake is fully disengaged • When leaving the vehicle, always remove the Key before driving; failure to do so can lead to brake Fob from the ignition and lock your vehicle. failure and a collision.
Page 484: Anti-Lock Brake System (Abs)
482 STARTING AND OPERATING • Brake pedal pulsations. ANTI-LOCK BRAKE SYSTEM (ABS) • A slight drop or fall away of the brake pedal at the end The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most of the stop.
Page 485: Anti-Lock Brake Warning Light
STARTING AND OPERATING 483 Anti-Lock Brake Warning Light WARNING! (Continued) • The Anti-Lock Brake System cannot prevent colli- The “Anti-Lock Brake Warning Light” moni- sions, including those resulting from excessive tors the anti-lock brake system. The light will speed in turns, following another vehicle too come on when the ignition switch is turned to closely, or hydroplaning.
Page 486: Electronic Brake Control System
484 STARTING AND OPERATING Warning Light” does not come on when the ignition Traction Control System (TCS) switch is turned to the ON position, have the bulb The Traction Control System (TCS) monitors the amount repaired as soon as possible. of wheel spin of each of the driven wheels.
Page 487: Brake Assist System (Bas)
STARTING AND OPERATING 485 and apply as little throttle as possible. Be sure to adapt Brake Assist System (BAS) your speed and driving to the prevailing road conditions, The Brake Assist System (BAS) is designed to optimize and do not switch off the ESC or TCS. the vehicle’s braking capability during emergency brak- ing maneuvers.
Page 488: Electronic Stability Control (Esc)
486 STARTING AND OPERATING wheel to assist in counteracting the over/under steer WARNING! condition. Engine power may also be reduced to help the • The BAS cannot prevent the natural laws of phys- vehicle maintain the desired path. ics from acting on the vehicle, nor can it increase ESC uses sensors in the vehicle to determine the vehicle the traction afforded by prevailing road conditions.
Page 489 STARTING AND OPERATING 487 ESC Operating Modes WARNING! The Electronic Stability Control System (ESC) cannot The “ESC Off” switch is located in the center prevent the natural laws of physics from acting on switch bank, next to the hazard flasher switch. the vehicle, nor can it increase the traction afforded by prevailing road conditions.
Page 490 488 STARTING AND OPERATING ESC Partial Off WARNING! This mode is entered by momentarily pressing the “ESC • When in Partial Off mode, the TCS functionality Off” switch. of ESC, (except for the limited slip feature de- When in the “Partial Off” mode, the TCS portion of ESC, scribed in the TCS section), has been disabled and except for the “limited slip”...
Page 491 STARTING AND OPERATING 489 NOTE: To improve the vehicle’s traction when driving light remains on after several ignition cycles, and the with snow chains, or starting off in deep snow, sand or vehicle has been driven several miles (kilometers) at gravel, it may be desirable to switch to the “Partial Off”...
Page 492: Trailer Sway Control (Tsc)
490 STARTING AND OPERATING NOTE: Trailer Sway Control (TSC) • The “ESC Activation/Malfunction Indicator Light” TSC uses sensors in the vehicle to recognize an exces- sively swaying trailer and will take the appropriate and the “ESC OFF Indicator Light” come on momen- actions to attempt to stop the sway.
Page 493: Hill Start Assist (Hsa)
STARTING AND OPERATING 491 HSA Activation Criteria WARNING! The following criteria must be met in order for HSA to If TSC activates while driving, slow the vehicle activate: down, stop at the nearest safe location, and adjust the • Vehicle must be stopped. trailer load to eliminate trailer sway.
Page 494 492 STARTING AND OPERATING For vehicles not equipped with the EVIC, perform the WARNING! following steps: There may be situations on minor hills with a loaded NOTE: You must complete Steps 1 through 8 within 90 vehicle, or while pulling a trailer, when the system seconds.
Page 495 STARTING AND OPERATING 493 8. Rotate the steering wheel back to center and then an WARNING! additional half-turn to the right. • If you use a trailer brake controller with your 9. Turn the ignition switch to the OFF position and then trailer, your trailer brakes may be activated and back to the ON position.
Page 496 494 STARTING AND OPERATING HSA Off WARNING! (Continued) If you wish to turn off the HSA system, it can be done • HSA is not a parking brake. If you stop the vehicle using the Customer Programmable Features in the Elec- on a hill without putting the transmission in PARK tronic Vehicle Information Center (EVIC).
Page 497: Tire Safety Information
STARTING AND OPERATING 495 TIRE SAFETY INFORMATION NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 498 496 STARTING AND OPERATING • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall.
Page 499 STARTING AND OPERATING 497 EXAMPLE: R = Construction code – R means radial construction – D means diagonal or bias construction 15 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 500: Tire Identification Number (Tin)
498 STARTING AND OPERATING EXAMPLE: Load Identification: ..blank..= Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire Extra Load (XL) = Extra load (or reinforced) tire Light Load (LL) = Light load tire C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load –...
Page 501 STARTING AND OPERATING 499 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 502: Tire Terminology And Definitions
500 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 503: Tire Loading And Tire Pressure
STARTING AND OPERATING 501 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. B-Pillar Location For Tire And Loading Information Placard...
Page 504 502 STARTING AND OPERATING Tire And Loading Information Placard 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading...
Page 505 STARTING AND OPERATING 503 To determine the maximum loading conditions of your 4. The resulting figure equals the available amount of vehicle, locate the statement “The combined weight of cargo and luggage load capacity. For example, if occupants and cargo should never exceed XXX lbs or “XXX”...
Page 506 504 STARTING AND OPERATING NOTE: • If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. The follow- ing table shows examples on how to calculate total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and num- ber and size of occupants.
Page 507 STARTING AND OPERATING 505...
Page 508: Tires - General Information
506 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 509: Tire Inflation Pressures
STARTING AND OPERATING 507 Ride Comfort And Vehicle Stability WARNING! (Continued) Proper tire inflation contributes to a comfortable ride. • Unequal tire pressures from one side of the vehicle Over-inflation produces a jarring and uncomfortable to the other can cause the vehicle to drift to the ride.
Page 510 508 STARTING AND OPERATING At least once a month: 1 mile (1.6 km) after a three hour period. The cold tire inflation pressure must not exceed the maximum infla- • Check and adjust tire pressure with a good quality tion pressure molded into the tire sidewall. pocket-type pressure gauge.
Page 511: Tire Pressures For High Speed Operation
STARTING AND OPERATING 509 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 512: Tire Types
510 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires — If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
Page 513: Run Flat Tires - If Equipped
STARTING AND OPERATING 511 If you need snow tires, select tires equivalent in size and Run Flat Tires — If Equipped type to the original equipment tires. Use snow tires only Run Flat tires allow you the capability to drive 50 miles in sets of four;...
Page 514: Spare Tires - If Equipped
512 STARTING AND OPERATING Spare Tires — If Equipped rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended NOTE: For vehicles equipped with TIREFIT instead of a tire rotation pattern. spare tire, please refer to “TIREFIT KIT”...
Page 515 STARTING AND OPERATING 513 Do not install a wheel cover or attempt to mount a front or rear axle of your vehicle, but it is not. This spare conventional tire on the compact spare wheel, since the tire may have limited tread life. When the tread is worn wheel is designed specifically for the compact spare tire.
Page 516: Tire Spinning
514 STARTING AND OPERATING Refer to “Freeing A Stuck Vehicle” in “What To Do In WARNING! Emergencies” for further information. Limited-use spares are for emergency use only. In- WARNING! stallation of this limited-use spare tire affects vehicle handling. With this tire, do not drive more than the Fast spinning tires can be dangerous.
Page 517: Life Of Tire
STARTING AND OPERATING 515 tread wear indicators, the tire should be replaced. Refer to “Replacement Tires” in this section for further infor- mation. Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: •...
Page 518: Replacement Tires
516 STARTING AND OPERATING Information placard or the Vehicle Certification Label for WARNING! the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original Tires and the spare tire should be replaced after six equipment tire sidewall.
Page 519: Tire Chains (Traction Devices)
STARTING AND OPERATING 517 WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 520 518 STARTING AND OPERATING • Install on front tires only. CAUTION! • On a 225/65R16 100H use of a traction device that To avoid damage to your vehicle or tires, observe the meets the SAE type “Class S” specification is recom- following precautions: mended.
Page 521: Tire Rotation Recommendations
STARTING AND OPERATING 519 These effects can be reduced by timely rotation of tires. CAUTION! (Continued) The benefits of rotation are especially worthwhile with • Observe the traction device manufacturer’s instruc- aggressive tread designs such as those on all season type tions on the method of installation, operating tires.
Page 522: Tire Pressure Monitor System (Tpms)
520 STARTING AND OPERATING The suggested rotation method is the “rearward cross” TIRE PRESSURE MONITOR SYSTEM (TPMS) shown in the following diagram. This rotation pattern The TPMS will warn the driver of a low tire pressure does not apply to some directional tires that must not be based on the cold inflation tire placard pressure require- reversed.
Page 523 STARTING AND OPERATING 521 The TPMS will warn the driver of a low tire pressure if For example, your vehicle may have a recommended the tire pressure falls below the low pressure warning cold (parked for more than three hours) tire placard threshold for any reason, including low temperature pressure of 35 psi (241 kPa).
Page 524 522 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance, or to provide warning of a tire equipment tires and wheels. TPMS pressures have failure or condition.
Page 525: Base System
STARTING AND OPERATING 523 • Seasonal temperature changes will affect tire pressure, Tire Pressure Monitoring Low Tire Pressure and the TPMS will monitor the actual tire pressure in Warnings the tire. The “Tire Pressure Monitoring Telltale Light” Base System will illuminate in the instrument cluster, a The TPMS uses wireless technology with wheel rim “LOW TIRE PRESSURE”...
Page 526 524 STARTING AND OPERATING • Accumulation of excessive snow and/or ice around NOTE: The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this infor- the wheels or wheel housings. mation. •...
Page 527: Premium System - If Equipped
STARTING AND OPERATING 525 • After driving for up to 20 minutes above 15 mph Premium System — If Equipped (24 km/h), the “Tire Pressure Monitoring Telltale The TPMS uses wireless technology with wheel rim- Light” will flash on and off for 75 seconds and then mounted electronic sensors to monitor tire pressure lev- remain on solid.
Page 528 526 STARTING AND OPERATING TPMS Low Pressure Warnings NOTE: The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this infor- The “Tire Pressure Monitoring Telltale Light” will illumi- mation. nate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire SERVICE TPM SYSTEM Message pressures are low.
Page 529 STARTING AND OPERATING 527 message will not be present, and a pressure value will be message is then followed by a graphic display with displayed instead of dashes. A system fault can occur by pressure values still shown. This indicates that the pres- any of the following scenarios: sure values are still being received from the TPM sensors but they may not be in the correct vehicle position.
Page 530 528 STARTING AND OPERATING • After driving the vehicle for up to 20 minutes above pressure value instead of dashes (- -), as long no tire 15 mph (24 km/h), the “Tire Pressure Monitoring pressure is below the low pressure warning limit in Telltale Light”...
Page 531: Fuel Requirements
STARTING AND OPERATING 529 The TPM sensors are regulated under one of the follow- Light spark knock at low engine speeds is not harmful to ing licenses: your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is United States MRXC4W4MA4 required.
Page 532: Reformulated Gasoline
530 STARTING AND OPERATING Reformulated Gasoline CAUTION! Many areas of the country require the use of cleaner DO NOT use gasoline containing Methanol or gaso- burning gasoline referred to as “Reformulated Gasoline.” line containing more than 10% Ethanol. Use of these Reformulated gasoline contain oxygenates and are spe- blends may result in starting and drivability prob- cifically blended to reduce vehicle emissions and im-...
Page 533: E-85 Usage In Non-Flex Fuel Vehicles
STARTING AND OPERATING 531 E-85 Usage In Non-Flex Fuel Vehicles To fix a Non-FFV vehicle inadvertently fueled once with E-85 perform the following: Non-Flex Fuel Vehicles (FFV) are compatible with gaso- • Drain the fuel tank (see your authorized dealer). line containing 10% ethanol (E10).
Page 534: Materials Added To Fuel
532 STARTING AND OPERATING MMT. Gasoline blended with MMT reduces spark plug Fuel System Cautions life and reduces emissions system performance in some vehicles. The manufacturer recommends that gasoline CAUTION! without MMT be used in your vehicle. The MMT content Follow these guidelines to maintain your vehicle’s of gasoline may not be indicated on the gasoline pump, performance:...
Page 535: Carbon Monoxide Warnings
STARTING AND OPERATING 533 Carbon Monoxide Warnings CAUTION! (Continued) • The use of fuel additives, which are now being WARNING! sold as octane enhancers, is not recommended. Carbon monoxide (CO) in exhaust gases is deadly. Most of these products contain high concentrations Follow the precautions below to prevent carbon of methanol.
Page 536: Flexible Fuel - If Equipped
534 STARTING AND OPERATING WARNING! (Continued) • Guard against carbon monoxide with proper main- tenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. FLEXIBLE FUEL —...
Page 537: Ethanol Fuel (E-85)
STARTING AND OPERATING 535 WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
Page 538: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
536 STARTING AND OPERATING • Some additives used in regular gasoline are not fully When you do switch fuel types it is recommended that: compatible with E-85 and may form deposits in your • You do not add less than 5 gallons (19 Liters) when engine.
Page 539: Starting
STARTING AND OPERATING 537 Starting Replacement Parts The characteristics of E-85 fuel make it unsuitable for use Many components in your Flexible Fuel Vehicle (FFV) are when ambient temperatures fall below 0°F (-18°C). In the designed to be compatible with ethanol. Always be sure range of 0°F (-18°C) to 32°F (0°C), you may experience an that your vehicle is serviced with correct ethanol com- increase in the time it takes for your engine to start, and...
Page 540: Starting And Operating Adding Fuel
538 STARTING AND OPERATING ADDING FUEL NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only Fuel Filler Cap (Gas Cap) when the sliding door is fully closed prior to opening the The gas cap is located behind the fuel filler door on the fuel door.
Page 541: Loose Fuel Filler Cap Message
STARTING AND OPERATING 539 • If the gas cap is not tightened properly, the MIL may WARNING! come on. Be sure the gas cap is tightened every time • Never have any smoking materials lit in or near the the vehicle is refueled. vehicle when the gas cap is removed or the tank is Loose Fuel Filler Cap Message being filled.
Page 542: Vehicle Loading
540 STARTING AND OPERATING • Gross Vehicle Weight Rating (GVWR) If the problem continues, the message will appear the next time the vehicle is started. See your authorized • Gross Axle Weight Rating (GAWR) front dealer as soon as possible. •...
Page 543 STARTING AND OPERATING 541 Gross Axle Weight Rating (GAWR) Rim Size The GAWR is the maximum capacity of the front and rear This is the rim size that is appropriate for the tire size axles. Distribute the load over the front and rear axles listed.
Page 544 542 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle-by-axle and side-by-side. Store heavier items service as long as you do not exceed the GVWR and the down low and be sure you distribute their weight as front and rear GAWR.
Page 545: Trailer Towing
STARTING AND OPERATING 543 TRAILER TOWING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting and Operating” for In this section you will find safety tips and information further information. on limits to the type of towing you can reasonably do with your vehicle.
Page 546 544 STARTING AND OPERATING Trailer Sway Control WARNING! The trailer sway control can be a mechanical telescoping It is important that you do not exceed the maximum link that can be installed between the hitch receiver and front or rear GAWR. A dangerous driving condition the trailer tongue that typically provides adjustable fric- can result if either rating is exceeded.
Page 547 STARTING AND OPERATING 545 Weight-Distributing Hitch WARNING! A weight-distributing system works by applying lever- • An improperly adjusted Weight Distributing Hitch age through spring (load) bars. They are typically used system may reduce handling, stability, braking for heavier loads to distribute trailer tongue weight to the performance, and could result in a collision.
Page 548 546 STARTING AND OPERATING Trailer Hitch Classification Trailer Hitch Classification Definitions The following chart provides the industry standard for Class Max. Trailer Hitch In- the maximum trailer weight a given trailer hitch class can dustry Standards tow and should be used to assist you in selecting the Class I - Light Duty 2,000 lbs (907 kg) correct trailer hitch for your intended towing condition.
Page 549 STARTING AND OPERATING 547 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. GCWR (Gross Engine/ Max. GTW (Gross Max. Tongue Combined Weight Frontal Area Transmission Trailer Weight) Weight Rating) 3.6L/Automatic...
Page 550 548 STARTING AND OPERATING NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information”...
Page 551 STARTING AND OPERATING 549 NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options or dealer-installed options must trailer is towed, do not drive over 50 mph (80 km/h) be considered as part of the total load on your vehicle.
Page 552 550 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Vehicles with trailers should not be parked on a • Make certain that the load is secured in the trailer grade. When parking, apply the parking brake on and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts the tow vehicle.
Page 553 STARTING AND OPERATING 551 Towing Requirements — Tires tire replacement procedures. Replacing tires with a higher load carrying capacity will not increase the • Do not attempt to tow a trailer while using a compact vehicle’s GVWR and GAWR limits. spare tire.
Page 554 552 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring WARNING! Whenever you pull a trailer, regardless of the trailer size, • Do not connect trailer brakes to your vehicle’s hydrau- stoplights and turn signals on the trailer are required for lic brake lines.
Page 555 STARTING AND OPERATING 553 Four-Pin Connector Seven-Pin Connector 1 — Female Pins 4 — Park 1 — Battery 5 — Ground 2 — Male Pin 5 — Left Stop/Turn 2 — Backup Lamps 6 — Left Stop/Turn 3 — Ground 6 —...
Page 556: Towing Tips
554 STARTING AND OPERATING Towing Tips or frequent trailer towing.” Refer to the “Maintenance Schedule” for the proper maintenance intervals. Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from Electronic Speed Control —...
Page 557: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 555 Highway Driving Reduce speed. Air Conditioning Turn off temporarily. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground All Models Flat Tow NONE NOT ALLOWED Dolly Tow Front Rear NOT ALLOWED On Trailer...
Page 558: Recreational Towing - All Models
556 STARTING AND OPERATING Recreational Towing — All Models CAUTION! Recreational towing is allowed ONLY if the front wheels DO NOT flat tow this vehicle. Damage to the drive- are OFF the ground. This may be accomplished using a train will result. tow dolly or vehicle trailer.
Page 559 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...559 JACKING AND TIRE CHANGING — IF EQUIPPED ......573 IF YOUR ENGINE OVERHEATS .
Page 560 558 WHAT TO DO IN EMERGENCIES ▫ Road Tire Installation ....591 FREEING A STUCK VEHICLE ... . .597 JUMP-STARTING .
Page 561: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 559 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the lower center area of the instrument panel. potential for overheating by taking the appropriate ac- tion.
Page 562: Tirefit Kit - If Equipped
560 WHAT TO DO IN EMERGENCIES TIREFIT KIT — IF EQUIPPED CAUTION! Small punctures up to ¼” (6 mm) in the tire tread can be Driving with a hot cooling system could damage sealed with TIREFIT. Foreign objects (e.g., screws or your vehicle.
Page 563: Tirefit Storage
WHAT TO DO IN EMERGENCIES 561 TIREFIT Storage 2. Turn the two rear left side trim panel latches to release the trim panel. The TIREFIT kit is stowed behind the rear left side trim panel in the rear cargo area. TIREFIT Kit TIREFIT Kit Location 1.
Page 564: Tirefit Kit Components And Operation
562 WHAT TO DO IN EMERGENCIES TIREFIT Kit Components And Operation Using The Mode Select Knob And Hoses Your TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only.
Page 565: Tirefit Usage Precautions
WHAT TO DO IN EMERGENCIES 563 Using The Power Button Push and release the Power Button (4) once to turn On the TIREFIT kit. Push and release the Power Button (4) again to turn Off the TIREFIT kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated.
Page 566 564 WHAT TO DO IN EMERGENCIES • When the TIREFIT sealant is in a liquid form, clean WARNING! water, and a damp cloth will remove the material from the vehicle or tire and wheel components. Once the • Do not attempt to seal a tire on the side of the sealant dries, it can easily be peeled off and properly vehicle closest to traffic.
Page 567: Sealing A Tire With Tirefit
WHAT TO DO IN EMERGENCIES 565 WARNING! (Continued) WARNING! (Continued) • Keep TIREFIT away from open flames or heat • TIREFIT Sealant solution contains latex. In case of source. an allergic reaction or rash, consult a physician • A loose TIREFIT kit thrown forward in a collision immediately.
Page 568 566 WHAT TO DO IN EMERGENCIES ground. This will provide the best positioning of the 4. Remove the cap from the valve stem and then screw kit when injecting the sealant into the deflated tire and the fitting at the end of the Sealant Hose (6) onto the running the air pump.
Page 569 WHAT TO DO IN EMERGENCIES 567 NOTE: Sealant may leak out through the puncture in the NOTE: If the Mode Select Knob (5) is on Air Mode and tire. the pump is operating, air will dispense from the Air Pump Hose (7) only, not the Sealant Hose (6). If the sealant (white fluid) does not flow within 0 –...
Page 570 568 WHAT TO DO IN EMERGENCIES If the tire does not inflate to at least 26 psi (1.8 Bar) 3. Immediately disconnect the Sealant Hose (6) from the pressure within 15 minutes: valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle •...
Page 571 WHAT TO DO IN EMERGENCIES 569 (D) Drive Vehicle: (E) After Driving: Immediately after injecting sealant and inflating the tire, Pull over to a safe location. Refer to “Whenever You Stop drive the vehicle 5 miles (8 km) or 10 minutes to ensure to Use TIREFIT”...
Page 572 570 WHAT TO DO IN EMERGENCIES If tire pressure is less than 19 psi (1.3 Bar): 4. Have the tire inspected and repaired or replaced at the earliest opportunity at an authorized dealer or tire The tire is too badly damaged. Do not attempt to drive service center.
Page 573: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 571 3. Press the Sealant Bottle release button. The Sealant WHEEL AND TIRE TORQUE SPECIFICATIONS Bottle (1) will pop up. Remove the bottle and dispose Proper lug nut/bolt torque is very important to ensure of it accordingly. that the wheel is properly mounted to the vehicle.
Page 574 572 WHAT TO DO IN EMERGENCIES Inspect the wheel mounting surface prior to mounting Tighten the lug nuts/bolts in a star pattern until each the tire and remove any corrosion or loose particles. nut/bolt has been tightened twice. Wheel Mounting Surface Torque Patterns After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated...
Page 575: Jacking And Tire Changing - If Equipped
WHAT TO DO IN EMERGENCIES 573 WARNING! WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The To avoid the risk of forcing the vehicle off the jack, vehicle could slip off the jack and fall on you. You do not tighten the lug nuts fully until the vehicle has could be crushed.
Page 576: Jack Location
574 WHAT TO DO IN EMERGENCIES Jack Location Spare Tire Removal The jack, jack handle and winch handle tools are stowed The spare tire is stowed inside a protective cover located under the center of the vehicle between the front doors by behind the rear left side trim panel in the rear cargo area.
Page 577: To Access Spare Tire Winch Drive Nut
WHAT TO DO IN EMERGENCIES 575 To Access Spare Tire Winch Drive Nut To access the spare tire winch drive nut and lower the spare tire, you will need to refer to one of the following center console configurations. Super Console For vehicles equipped with the Super Console, the spare tire winch assembly drive nut is located beneath the console.
Page 578 576 WHAT TO DO IN EMERGENCIES 2. Open the front drawer to expose the storage compart- ment. 3. Remove the liner from the console’s storage compart- ment to access the spare tire winch drive nut. Super Console 1 — Lower Drawer 2 —...
Page 579: Spare Tire Tools
WHAT TO DO IN EMERGENCIES 577 Premium/Base/Cargo Center Console Spare Tire Tools Pull the Winch Cover assembly plug (if equipped) to The tool pouch contains three pieces and can be as- access the winch drive nut. sembled into a spare tire hook; to remove the compact spare tire/cover assembly from under the vehicle, or a Winch T-handle;...
Page 580 578 WHAT TO DO IN EMERGENCIES Assembled T-handle Assembling The Spare Tire Hook A — Spare Tire Hook/T-handle A — Spare Tire Hook/T-handle B — Extension 1 B — Extension 1 C — Extension 2 C — Extension 2...
Page 581: Spare Tire Removal Instructions
WHAT TO DO IN EMERGENCIES 579 Spare Tire Removal Instructions 2. Rotate the nut to the left until the winch mechanism stops turning freely. This will allow enough slack in The spare tire is located under the vehicle beneath the the cable to allow you to pull the spare tire out from center console area.
Page 582 580 WHAT TO DO IN EMERGENCIES 3. To remove the compact spare tire/cover assembly, NOTE: If either front tire is flat it may be necessary to assemble the winch T-handle extensions to form a jack up the vehicle to remove the compact spare tire/ spare tire hook, and pull the spare tire out from under cover assembly from under the vehicle.
Page 583: Preparations For Jacking
WHAT TO DO IN EMERGENCIES 581 Preparations For Jacking 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel.
Page 584: Jacking Instructions
582 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally WARNING! (Continued) opposite of the jacking position. For • Turn on the Hazard Warning flasher. example, if changing the right front • Block the wheel diagonally opposite the wheel to tire, block the left rear wheel.
Page 585 WHAT TO DO IN EMERGENCIES 583 WARNING! (Continued) CAUTION! • If working on or near a roadway, be extremely Do not attempt to raise the vehicle by jacking on careful of motor traffic. locations other than those indicated in the Jacking •...
Page 586 584 WHAT TO DO IN EMERGENCIES Rear jack locations are between a pair of down-facing tabs on the sill flange of the vehicle side body. Jack Locations CAUTION! Do not attempt to raise the vehicle by jacking on Rear Jacking Locations locations other than those indicated.
Page 587 WHAT TO DO IN EMERGENCIES 585 Rear Jack Engaged Front Jack Locations Front jack location is on the sill flange of the vehicle body and is located 6 in (150 mm) from door edge.
Page 588 586 WHAT TO DO IN EMERGENCIES WARNING! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Page 589 WHAT TO DO IN EMERGENCIES 587 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover from the wheel by hand.
Page 590 588 WHAT TO DO IN EMERGENCIES NOTE: Do not install the wheel cover on the compact 10. Place the deflated (flat) tire and compact spare tire spare. cover assembly in the rear cargo area. Do not stow the deflated tire in the compact spare tire location. 7.
Page 591: Securing The Compact Spare Tire
WHAT TO DO IN EMERGENCIES 589 Securing The Compact Spare Tire CAUTION! 1. Assemble the winch handle extensions to form a The winch mechanism is designed for use with the T-handle and fit the winch T-handle over the drive winch T-handle only. Use of an air wrench or other nut.
Page 592 590 WHAT TO DO IN EMERGENCIES 4. Using the winch T-handle, rotate the drive nut to the CAUTION! right until the compact spare tire/cover assembly is drawn into place against the underside of the vehicle. The compact spare tire/cover assembly must be used when the compact spare tire is stored.
Page 593: Road Tire Installation
WHAT TO DO IN EMERGENCIES 591 Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem.
Page 594 592 WHAT TO DO IN EMERGENCIES 3. Align the valve notch in the wheel cover with the 6. Refer to “Torque Specifications” in this section for valve stem on the wheel. Install the cover by hand, proper wheel lug nut torque. snapping the cover over the two lug nuts.
Page 595: Jump-Starting
WHAT TO DO IN EMERGENCIES 593 3. Lower the vehicle to the ground by turning the jack CAUTION! handle counterclockwise. Do not use a portable battery booster pack or any 4. Refer to “Torque Specifications” in this section for other booster source with a system voltage greater proper wheel lug nut torque.
Page 596: Preparations For Jump-Start
594 WHAT TO DO IN EMERGENCIES Preparations For Jump-Start WARNING! The battery in your vehicle is located on the left side of • Take care to avoid the radiator cooling fan when- the engine compartment. ever the hood is raised. It can start anytime the ignition switch is ON.
Page 597: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 595 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 598 596 WHAT TO DO IN EMERGENCIES 4. Connect the opposite end of the negative (-) jumper 6. Once the engine is started, remove the jumper cables cable to a good engine ground (exposed metal part of in the reverse sequence: the discharged vehicle’s engine) away from the battery Disconnecting The Jumper Cables and the fuel injection system.
Page 599: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 597 CAUTION! CAUTION! Accessories plugged into the vehicle power outlets Racing the engine or spinning the wheels may lead to draw power from the vehicle’s battery, even when not transmission overheating and failure. Allow the en- in use (i.e., cellular phones, etc.).
Page 600: Shift Lever Override
598 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! (Continued) explode and injure someone. Do not spin your vehi- • When “rocking” a stuck vehicle by shifting be- cle’s wheels faster than 30 mph (48 km/h) or for tween DRIVE and REVERSE, do not spin the longer than 30 seconds continuously without stop- wheels faster than 15 mph (24 km/h), or drivetrain ping when you are stuck and do not let anyone near...
Page 601 WHAT TO DO IN EMERGENCIES 599 4. Press and maintain firm pressure on the brake pedal. 5. Insert the screwdriver or similar tool into the access hole, and push and hold the override release lever forward. 6. Move the shift lever to the NEUTRAL position. 7.
Page 602: Towing A Disabled Vehicle
600 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service. Towing Condition Wheels OFF the Ground ALL MODELS Flat Tow NONE If transmission is operable: • Transmission in NEUTRAL Wheel lift Rear •...
Page 603 WHAT TO DO IN EMERGENCIES 601 If the key fob is unavailable or the vehicle’s battery is The manufacturer recommends towing your vehicle with discharged, see Shift Lever Override in this section for all four wheels OFF the ground using a flatbed. If flatbed instructions on shifting the transmission out of PARK for equipment is not available, and the transmission is towing.
Page 604 602 WHAT TO DO IN EMERGENCIES CAUTION! Towing faster than 25 mph (40 km/h) or farther than 15 mi (24 km) with front wheels on the ground can cause severe transmission damage. Such damage is not covered by the New Vehicle Limited Warranty. CAUTION! Towing this vehicle in violation of the above require- ments can cause severe transmission damage.
Page 605: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Air Cleaner Filter ....613 ENGINE COMPARTMENT — 3.6L ..605 ▫ Exhaust System ..... .614 ONBOARD DIAGNOSTIC SYSTEM —...
Page 606 604 MAINTAINING YOUR VEHICLE ▫ Appearance Care And Protection From ▫ Fog Lamps ......650 Corrosion ......632 ▫...
Page 607: Engine Compartment - 3.6L
MAINTAINING YOUR VEHICLE 605 ENGINE COMPARTMENT — 3.6L 1 — Air Filter 6 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Battery 9 —...
Page 608: Onboard Diagnostic System - Obd Ii
606 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated Onboard • Prolonged driving with the MIL on could cause Diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 609: Emissions Inspection And Maintenance Programs
MAINTAINING YOUR VEHICLE 607 “Electronic Vehicle Information Center (EVIC)” in ”Un- EMISSIONS INSPECTION AND MAINTENANCE derstanding Your Instrument Panel” for further informa- PROGRAMS tion. Tighten the gas cap until a clicking sound is heard. In some localities, it may be a legal requirement to pass This is an indication that the gas cap is properly tight- an inspection of your vehicle’s emissions control system.
Page 610 608 MAINTAINING YOUR VEHICLE • The MIL will not flash at all and will remain fully Your vehicle has a simple ignition actuated test, which you can use prior to going to the test station. To check if your illuminated until you turn OFF the ignition or start the vehicle’s OBD II system is ready, you must do the following: engine.
Page 611: Replacement Parts
MAINTAINING YOUR VEHICLE 609 REPLACEMENT PARTS NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil Use of genuine MOPAR® parts for normal/scheduled penalties being assessed against you. maintenance and repairs is highly recommended to en- sure the designed performance.
Page 612: Maintenance Procedures
610 MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES CAUTION! (Continued) The pages that follow contain the required maintenance • Your vehicle has been built with improved fluids services determined by the engineers who designed your that protect the performance and durability of your vehicle.
Page 613: Engine Oil
MAINTAINING YOUR VEHICLE 611 Engine Oil Change Engine Oil The oil change indicator system will remind you that it is Checking Oil Level time to take your vehicle in for scheduled maintenance. To assure proper engine lubrication, the engine oil must Refer to the “Maintenance Schedule”...
Page 614 612 MAINTAINING YOUR VEHICLE American Petroleum Institute (API) Engine Oil Engine Oil Viscosity — 3.6L Engine Identification Symbol MOPAR® SAE 5W-20 engine oil approved to Chrysler Material Standard MS-6395 such as Pennzoil®, Shell This symbol means that the oil has Helix®...
Page 615: Engine Oil Filter
MAINTAINING YOUR VEHICLE 613 Synthetic Engine Oils station or governmental agency for advice on how and where used oil and oil filters can be safely discarded in You may use synthetic engine oils provided the recom- your area. mended oil quality requirements are met, and the recom- mended maintenance intervals for oil and filter changes Engine Oil Filter are followed.
Page 616: Exhaust System
614 MAINTAINING YOUR VEHICLE Exhaust System WARNING! The best protection against carbon monoxide entry into The air induction system (air cleaner, hoses, etc.) can the vehicle body is a properly maintained engine exhaust provide a measure of protection in the case of engine system.
Page 617 MAINTAINING YOUR VEHICLE 615 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions control and can eventually poison you.
Page 618: Maintenance-Free Battery
616 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 619: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 617 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Do not allow battery fluid battery that the positive cable is attached to the positive post and the negative cable is attached to to contact your eyes, skin, or clothing.
Page 620 618 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Use only refrigerants and compressor lubricants Do not use chemical flushes in your air conditioning approved by the manufacturer for your air condi- system as the chemicals can damage your air condi- tioning system. Some unapproved refrigerants are tioning components.
Page 621 MAINTAINING YOUR VEHICLE 619 A/C Air Filter 4. Disengage the two retaining tabs that secure the filter cover to the HVAC housing, and remove the cover. Refer to the “Maintenance Schedule” for the proper maintenance intervals. WARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result.
Page 622: Body Lubrication
620 MAINTAINING YOUR VEHICLE 6. Install the A/C air filter with the arrow on the filter operation and to protect against rust and wear. Prior to pointing toward the floor. When installing the filter the application of any lubricant, the parts concerned cover, make sure the retaining tabs fully engage the should be wiped clean to remove dust and grit;...
Page 623 MAINTAINING YOUR VEHICLE 621 Operation of the wipers on dry glass for long periods Adding Washer Fluid may cause deterioration of the wiper blades. Always use The fluid reservoir for the windshield washers and the washer fluid when using the wipers to remove salt or dirt rear window washer is shared.
Page 624: Cooling System
622 MAINTAINING YOUR VEHICLE After the engine has warmed, operate the defroster for a WARNING! (Continued) few minutes to reduce the possibility of smearing or • You or others can be badly burned by hot engine freezing the fluid on the cold windshield. MOPAR® All coolant (antifreeze) or steam from your radiator.
Page 625 MAINTAINING YOUR VEHICLE 623 Check the coolant recovery bottle tubing for brittle rub- Refer to the “Maintenance Schedule” for the proper ber, cracking, tears, cuts and tightness of the connection maintenance intervals. at the bottle and radiator. Inspect the entire system for NOTE: Some vehicles require special tools to add coolant leaks.
Page 626 624 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 627 MAINTAINING YOUR VEHICLE 625 • Use only high purity water such as distilled or deion- important that you use the same engine coolant (OAT coolant conforming to MS-12106) throughout the life of ized water when mixing the water/engine coolant your vehicle. (antifreeze) solution.
Page 628 626 MAINTAINING YOUR VEHICLE • Mixing engine coolant (antifreeze) types is not recom- WARNING! mended and can result in cooling system damage. If • Do not open hot engine cooling system. Never add HOAT and OAT coolant are mixed in an emergency, have a authorized dealer drain, flush, and refill with engine coolant (antifreeze) when the engine is OAT coolant (conforming to MS-12106) as soon as...
Page 629 MAINTAINING YOUR VEHICLE 627 engine coolant in open containers or allow it to remain in When additional engine coolant (antifreeze) is needed to puddles on the ground. If ingested by a child or pet, seek maintain the proper level, only OAT coolant that meets the emergency assistance immediately.
Page 630: Brake System
628 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in • Do not change the thermostat for Summer or Winter the coolant expansion bottle. If engine coolant (anti- operation. If replacement is ever necessary, install freeze) needs to be added, the contents of the coolant ONLY the correct type thermostat.
Page 631 MAINTAINING YOUR VEHICLE 629 brakes, fluid level can be expected to fall as the brake WARNING! (Continued) pads wear. However, low fluid level may be caused by a high brake temperatures, excessive lining wear, and leak and a checkup may be needed. possible brake damage.
Page 632: Automatic Transmission
630 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contaminate moisture, use only new brake fluid or fluid that has the brake fluid. Brake seal components could be been in a tightly closed container.
Page 633 MAINTAINING YOUR VEHICLE 631 CAUTION! CAUTION! Using a transmission fluid other than the manufactur- Do not use chemical flushes in your transmission as er’s recommended fluid may cause deterioration in the chemicals can damage your transmission compo- transmission shift quality and/or torque converter shud- nents.
Page 634: Appearance Care And Protection From
632 MAINTAINING YOUR VEHICLE Appearance Care And Protection From Corrosion CAUTION! Protection Of Body And Paint From Corrosion If a transmission fluid leak occurs, visit your autho- Vehicle body care requirements vary according to geo- rized dealer immediately. Severe transmission dam- graphic locations and usage.
Page 635 MAINTAINING YOUR VEHICLE 633 • If insects, tar, or other similar deposits have accumu- What Causes Corrosion? lated on your vehicle, use MOPAR® Super Kleen Bug Corrosion is the result of deterioration or removal of and Tar Remover to remove. paint and protective coatings from your vehicle.
Page 636 634 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, Special Care de-icer salt, etc., be sure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once •...
Page 637 MAINTAINING YOUR VEHICLE 635 To remove heavy soil and/or excessive brake dust, use Stain Repel Fabric Cleaning Procedure — If MOPAR® Wheel Cleaner or equivalent or select a non- Equipped abrasive, non-acidic cleaner. Stain Repel seats may be cleaned in the following man- •...
Page 638 636 MAINTAINING YOUR VEHICLE Interior Care Cleaning Leather Upholstery Instrument Panel Surfaces MOPAR® Total Clean or equivalent is specifically recom- mended for leather upholstery. The instrument panel cover has a low glare surface, which minimizes reflections in the windshield. Do not Your leather upholstery can be best preserved by regular use protectants or other products which may cause cleaning with a damp soft cloth.
Page 639 MAINTAINING YOUR VEHICLE 637 To minimize the possibility of scratching the lenses and CAUTION! reducing light output, avoid wiping with a dry cloth. To • Do not use volatile solvents for cleaning purposes. remove road dirt, wash with a mild soap solution fol- lowed by rinsing.
Page 640 638 MAINTAINING YOUR VEHICLE When cleaning the rear view mirror, spray cleaner on the If the belts need cleaning, use MOPAR® Total Clean, a towel or rag that you are using. Do not spray cleaner mild soap solution, or lukewarm water. Do not remove directly on the mirror.
Page 641: Cleaning The Instrument Panel Cupholders
MAINTAINING YOUR VEHICLE 639 Cleaning The Instrument Panel Cupholders Installation Place the liner into the cupholder drawer and press the Removal liner into place so that the retention tabs seat into the Pull the flexible liner from the cupholder drawer starting corresponding openings in the drawer.
Page 642: Totally Integrated Power Module (Fuses)
640 MAINTAINING YOUR VEHICLE Totally Integrated Power Module (Fuses) WARNING! (Continued) The Totally Integrated Power Module is located in the • Before replacing a fuse, make sure that the ignition engine compartment near the battery. Refer to the appli- is off and that all the other services are switched off cable “Engine Compartment”...
Page 643 MAINTAINING YOUR VEHICLE 641 CAUTION! • When installing the Totally Integrated Power Mod- ule cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
Page 644 642 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green — Power Folding Seat 30 Amp Pink — Power Liftgate Module 30 Amp Pink — Rear Door Module 25 Amp Natural — Driver Door Node 25 Amp Natural —...
Page 645 MAINTAINING YOUR VEHICLE 643 Cavity Cartridge Fuse Mini-Fuse Description 30 Amp Pink — Power Sliding Door Module/Anti–Theft Module – If Equipped 30 Amp Pink HVAC Rear Blower, Radiator Fan Motor 60 Amp Yellow — Ignition Off Draw (IOD) – Main 40 Amp Green —...
Page 646 644 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Trailer Tow — 25 Amp Natural Inverter — 20 Amp Yellow Power Outlet #1 (ACC), Rain Sensor, Cigar Lighter (Instrument Panel or with Console Rear) — 20 Amp Yellow Power Outlet #2 (BATT/ACC SELECT) –...
Page 647 MAINTAINING YOUR VEHICLE 645 Cavity Cartridge Fuse Mini-Fuse Description — 20 Amp Yellow Instrument Cluster, SIREN, Clock Module, Multi-Function Control Switch – If Equipped — 20 Amp Yellow Trailer Tow – If Equipped — 20 Amp Yellow Rear View Mirror, Instrument Cluster, Multi- Function Control Switch, Tire Pressure Moni- tor, Glow Plug Module –...
Page 648 646 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Horn — 25 Amp Natural Rear Wiper — 20 Amp Yellow Fuel Pump, Diesel Lift Pump – If Equipped — 10 Amp Red Power Mirror Switch, Driver Window Switch —...
Page 649 MAINTAINING YOUR VEHICLE 647 Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Park Assist, Heater Climate Control Module, Headlamp Wash, Compass, Rear Camera, Door Lamps, Flashlight, Relay Diesel Cabin Heater, Rad Fan Diesel – If Equipped — 10 Amp Red Heated Mirrors —...
Page 650: Vehicle Storage
648 MAINTAINING YOUR VEHICLE VEHICLE STORAGE REPLACEMENT BULBS If you are leaving your vehicle dormant for more than 21 Interior Bulbs days, you may want to take steps to protect your battery. Bulb Number You may do the following: • Remove the 60 Amp cartridge in the Totally Integrated Center &...
Page 651: Bulb Replacement
MAINTAINING YOUR VEHICLE 649 Bulb Number Bulb Number Removable Console Center High-Mounted LED (Serviced at Autho- Lamp – If Equipped Stop Lamp rized Dealer) Visor Vanity Lamps 6501966 Backup Lamp 3157 License NOTE: For lighted switches, see your authorized dealer for replacement instructions. NOTE: All of the interior bulbs are glass wedge base or glass cartridge types.
Page 652: Headlamps
650 MAINTAINING YOUR VEHICLE Headlamps 5. Connect the wiring connector to bulb and slide red lock tab forward. 1. Raise the hood to access the rear of the headlamp housing. Front Park/Turn Signal Lamps 2. Slide the red lock tab rearward on the connector, then 1.
Page 653: Rear Tail, Stop, Turn Signal, Side Marker And Backup Lamps
MAINTAINING YOUR VEHICLE 651 1. From behind the bumper fascia, or the access panel on 2. Remove the tail lamp assembly by removing the two the air dam, squeeze the two tabs on the side of the screws from the inboard side. Use a fiber stick or bulb socket and pull straight out from the fog lamp.
Page 654: Center High-Mounted Stop Lamp (Chmsl)
652 MAINTAINING YOUR VEHICLE NOTE: License Lamp • If a screwdriver is used, make sure a soft material is The license plate lamp is located under the tailgate light placed between the vehicle body and tool so not to bar and above the license plate. scratch the paint.
Page 655: Fluid Capacities
MAINTAINING YOUR VEHICLE 653 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 20 Gallons 76 Liters Engine Oil with Filter 3.6L Engine (SAE 5W-20, API Certified). 6 Quarts 5.6 Liters Cooling System * 3.6L Engine (MOPAR® Antifreeze/Engine Coolant 10 13.4 Quarts 12.6 Liters Year/150,000 Mile Formula or equivalent) meeting the requirements of Chrysler Material Standard MS-12106.
Page 656: Fluids, Lubricants And Genuine Parts
654 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106. Engine Oil We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the require- ments of Chrysler Material Standard MS-6395 such as MOPAR®, Pennzoil®, and...
Page 657: Chassis
MAINTAINING YOUR VEHICLE 655 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use Only ATF+4® Automatic Transmission Fluid. Failure to use ATF+4® fluid may affect the function or performance of your transmission. We recommend MOPAR® ATF+4® Fluid. Brake Master Cylinder We recommend you use MOPAR®...
Page 659 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart ....660 MAINTENANCE SCHEDULE ... . .658...
Page 660 658 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE than your authorized dealer, the message can be reset by referring to the steps described under “Electronic Vehicle Your vehicle is equipped with an automatic oil change Information Center (EVIC)” in “Understanding Your indicator system. The oil change indicator system will Instrument Panel”...
Page 661 MAINTENANCE SCHEDULES 659 • Check tire pressure and look for unusual wear or At Every Oil Change Interval As Indicated By Oil damage. Rotate tires at the first sign of irregular wear, Change Indicator System: even if it occurs before the oil indicator system turns •...
Page 662 660 MAINTENANCE SCHEDULES Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary.
Page 663 MAINTENANCE SCHEDULES 661 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air filter. Replace cabin/air conditioning filter. Replace spark plugs (3.6L engine). ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
Page 664 662 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change automatic transmission fluid and filter if using your ve- hicle for any of the following: po- lice, taxi, fleet, or frequent trailer towing. Change automatic transmission fluid and filter.
Page 665 MAINTENANCE SCHEDULES 663 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 667 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .667 Impaired (TDD/TTY).
Page 668 666 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .673 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....673 ▫...
Page 669: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 667 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 670: Chrysler Group Llc Customer Center
668 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer service manager first.
Page 671: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 669 In Mexico Contact: Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 672: Warranty Information
670 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust, some of its constituents, and certain manufacturer’s service contract.
Page 673: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 671 MOPAR® PARTS To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), MOPAR® fluids, lubricants, parts, and accessories are or go to http://www.safercar.gov; or write to: Administra- available from an authorized dealer.
Page 674: Publication Order Forms
672 IF YOU NEED CONSUMER ASSISTANCE PUBLICATION ORDER FORMS Diagnostic Procedure Manuals To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Mas- charts and detailed illustrations. These practical manuals tercard, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 675: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 673 Call toll free at: Treadwear • 1–800–890–4038 (U.S.) The Treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 676: Temperature Grades
674 IF YOU NEED CONSUMER ASSISTANCE excessive temperature can lead to sudden tire failure. The WARNING! grade C corresponds to a level of performance, which all passenger car tires must meet under the Federal Motor The traction grade assigned to this tire is based on Vehicle Safety Standard No.
Page 677 INDEX...
Page 678 676 INDEX Adding Engine Coolant (Antifreeze) ... .624 Air Conditioning System, Zone Control..434 Adding Fuel ......538 Air Pressure, Tires.
Page 679 INDEX 677 Adding Fluid ......631 Brake Fluid ......655 Fluid and Filter Changes .
Page 680 678 INDEX Luggage Carrier ......299 Child Safety Locks ......50 Cargo (Vehicle Loading) .
Page 681 INDEX 679 Console, Overhead ......256 Data Recorder, Event ..... . .91 Console, Removable .
Page 682 680 INDEX Door Opener, Garage..... . .260 Jump Starting ......593 Driving Overheating .
Page 683 INDEX 681 Starting ......459 Flashers Temperature Gauge ..... .324 Hazard Warning .
Page 684 682 INDEX Power Steering ......478 Methanol ......530 Fluids, Lubricants and Genuine Parts .
Page 685 INDEX 683 Fuel ....... . .321 Passing ......231 Speedometer .
Page 686 684 INDEX Illuminated Entry ......20 Jump Starting ......593 Immobilizer (Sentry Key) .
Page 687 INDEX 685 Light Bulbs......124 Headlights ......650 Lights .
Page 688 686 INDEX Service Engine Soon (Malfunction Indicator) ..319 Maintenance Schedule ..... .658 Side Marker ......651 Malfunction Indicator Light (Check Engine).
Page 689 INDEX 687 Modifications/Alterations, Vehicle ....7 Filter ....... .613 Monitor, Tire Pressure System .
Page 690 688 INDEX Parking Brake......479 Pretensioners ParkSense® System, Rear....244 Seat Belts .
Page 691 INDEX 689 Refrigerant ......618 Rotation, Tires ......519 Reminder, Seat Belt.
Page 692 690 INDEX Inspection ......121 Service Engine Soon Light (Malfunction Indicator) . .319 Pretensioners ......69 Service Manuals .
Page 693 INDEX 691 Starting and Operating .....459 System, Remote Starting .....31 Starting Procedures .
Page 694 692 INDEX Jacking .......573 Towing ....... .543 Life of Tires .
Page 695 INDEX 693 Trailer Towing Guide..... . .547 Operating Instructions Radio Mode ..350 Trailer Weight .
Page 696 694 INDEX Vehicle Modifications/Alterations ....7 Water Vehicle Storage ......452 Driving Through .
Page 697 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehi- The antenna cable should be as short as practical and routed cle’s electronic system to provide immunity to radio frequency away from the vehicle wiring when possible. Use only fully signals.
Page 698 Chrysler Group LLC 14Y532-126-AE Fifth Edition Printed in U.S.A.

This manual is also suitable for:

Grand caravan 2014

Dodge 2014 Grand Caravan Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Quick Links

Chapters

Related Manuals for Dodge 2014 Grand Caravan

Summary of Contents for Dodge 2014 Grand Caravan