Dodge 2015 CHARGER User Manual page 124

E L E C T R O N I C S
Setting The Time
Model 8.4AN synchronizes time automatically via GPS, so it should not require any time
adjustment. If you do need to set the time manually, follow the instructions below for
Model 8.4A.
1. Turn the unit on, then press the "Time Display" at the top of the screen. Press "Yes."
NOTE:
If the time is not displayed at the top of the screen, press the "Controls" or the "Apps"
button on the touchscreen, then the "Settings" button on the touchscreen. In the Settings
screen, press the "Clock" button on the touchscreen.
2. Press "+" or "–" next to Set Time Hours and Set Time Minutes to adjust the time.
3. If these features are not available, uncheck the Sync with GPS box.
4. Press "X" to save your settings and exit out of the Clock Setting screen.
Audio Settings
To adjust the Audio settings:
1. Press the "Media" or "Radio" button on the touchscreen.
2. Press the "Audio" button on the touchscreen to activate the Audio settings screen to
adjust Balance/Fade, Equalizer and Speed Adjusted Volume.
3. You can return to the Radio screen by pressing the "X" located at the top right.
Balance/Fade
To adjust the Balance/Fade settings:
1. Press the "Media" or "Radio" button on the touchscreen.
2. Press the "Audio" button on the touchscreen to activate the Audio settings screen to
adjust Balance/Fade, Equalizer and Speed Adjusted Volume.
3. Press the "Balance/Fade" button on the touchscreen to Balance audio between the
front speakers or fade the audio between the rear and front speakers.
4. Pressing the "Front," "Rear," "Left" or "Right" button on the touchscreens or press
and drag the Speaker Icon to adjust the Balance/Fade.
Equalizer
To adjust the equalizer settings:
1. Press the "Media" or "Radio" button on the touchscreen.
2. Press the "Audio" button on the touchscreen to activate the Audio settings screen to
adjust Balance/Fade, Equalizer and Speed Adjusted Volume.
3. Press the "Equalizer" button on the touchscreen to activate the Equalizer screen.
4. Press the "+" or "–" button on the touchscreens, or by pressing and dragging over the
"level bar" for each of the equalizer bands. The level value, which spans between plus
or minus 9, is displayed at the bottom of each of the Bands.
122