Led Lighting; Storage Features - Kenmore 970R44843 Series Use & Care Manual

LED Lighting

Replacing LED Lights (select models)
To Replace LED Lights:
1. Unplug your refrigerator's power cord.
2. Remove light cover by pushing up
and out.
3. Hold the LED cover with one hand and
pull the connector with the other hand
while pressing the connector latch.
4. Replace LED light and snap in place
assuring the light is facing in toward
the unit (inside fresh food).
LED Light Removal
LED Light Harness Removal
NOTE
LED lights are in series so if one is bad or
unplugged, several lights may not light up.

Storage Features

Glass Shelves
Multi-position adjustable slide out glass
shelves can be moved to any position for
larger or smaller packages. The shipping
spacers that stabilize the shelves for
shipping may be removed and discarded.
To Adjust The Shelves
1. Lift front edge up.
2. Pull shelf out.
Replace the shelf by inserting the hooks at rear
of the shelf into the wall bracket. Lower the shelf
into the desired slots and lock into position.
Deli Drawer
This model is equipped with a Deli Drawer
for storage of luncheon meats, spreads,
cheeses, and other deli items.
Crisper Drawer With
Adjustable Dividers
The crisper drawer, located at the bottom
of the appliance interior, is designed for
storing fruits, vegetables, and other fresh
produce. Wash items in clean water and
then remove excess water before placing
them in the crisper. Items with strong odors
or high moisture content should be wrapped
16
Insert into
slots