Download Table of Contents Print this page

Led Light Replacement; Power Interruptions; When You Go On Vacation; When You Move - Kenmore 795.5185 series Use & Care Manual

Side-by-side refrigerator
Table of Contents




Electrical Shock Hazard
Before service is performed on the interior LED lighting,
unplug the refrigerator or turn oç power at the circuit
breaker or fuse box.
Setting either or both controls to the OFF position does
not remove power to the light circuit.
NOTE: The refrigerator and freezer compartment lights
are LED interior lighting, and service should be performed
by a qualio ed technician.


1. If the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and
2. If the power will be out for more than 24 hours, remove
all frozen food and store it in a frozen food locker.


If you choose to leave the refrigerator on while you are
away, follow these steps to prepare your refrigerator
before you leave.
1. Use up any perishables and freeze other items.
2. Turn oç the icemaker and empty the ice bin.
If you choose to turn the refrigerator oç before you leave,
follow these steps.
1. Remove all food from the refrigerator.
2. Depending on your model, set the thermostat control
(refrigerator control) to OFF. See the SETTING THE
CONTROLS section.
3. Clean the refrigerator, wipe it and dry well.
4. Tape rubber or wood blocks to the tops of both doors
to prop them open far enough for air to get in. This
stops odor and mold from building up.


When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all
frozen food in dry ice.
2. Unplug the refrigerator.
3. Clean, wipe and dry thoroughly.
4. Take out all removable parts, wrap them well
and tape them together so they do not shift and
rattle during the move. Refer to the USING YOUR
REFRIGERATOR section for removal instructions.
5. Depending on the model, raise the front of the
refrigerator so it rolls more easily OR screw in the
leveling legs all the way so they do not scrape the
p oor. See the DOOR ALIGNMENT section.
6. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back and
refer to the REFRIGERATOR INSTALLATION section for
preparation instructions.

Hide quick links:


Table of Contents

This manual is also suitable for:

795.5186 series

Table of Contents