Enabling Wi-Fi Direct Mode - Epson PM-400 User Manual

To disconnect a peer-to-peer mode connection, release the connection to your product from your
computer or other device.
To enable peer-to-peer mode, you must select it from the Web Config Utility, under WiFi/Network
Settings > Services > Wi-Fi Direct.

Enabling Wi-Fi Direct Mode

Parent topic:
Related tasks
Accessing the Web Config Utility
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1. Press the
2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.
You see this screen:
3. Select Wi-Fi Direct and press the OK button.
4. Press the OK button again to proceed.
Wi-Fi Networking
home button, if necessary.
30