Renault Kadjar Driver's Handbook Manual page 44

CHILD SAFETY: choosing a child seat mounting
2
Attachment using the ISOFIX
system (continued)
The two rings 1 are located between
the seatback and the seat base of the
seat and are identified by a marking.
To ensure your child seat can be easily
fitted and locked on the rings 1, use
access guides 2 on the child seat.
To access the rings, insert your finger in
the cover and pull.
Note: Keep the covers you have re-
moved in a storage compartment so as
not to lose or damage them.
1.38
1
3
The third ring 3 or 4 is used to attach
the upper strap on some seats ISOFIX.
The child seat strap must
be attached to the corre-
sponding ring.
Do not use any other
mounting point.
(2/2)
The rings are located on the rear seat-
backs and indicated by the symbol
In all cases, attach the strap hook to the
corresponding ring 3 and 4 and place
the seat in the desired position.
4
Pull the belt so that the back of the child
seat comes into contact with the back
of the vehicle seat.
system. Never fit a different type of
child seat, seat belt or other objects
to these anchorage points. Check
that nothing is obstructing the an-
chorage points.
If your vehicle has been involved in
a road accident, have the ISOFIX
anchorage points checked and re-
place your child seat.
The ISOFIX anchorage
points have been exclu-
sively designed for child
seats with the ISOFIX
.