4 Handwheel to adjust side broom
The broom may touch the floor
with the forward 2/3 of its circum-
ference only so that it can feed the
rubbish to the forward end of the
main broom and not sweep it
around only. The preset working
level of the side broom is kept con-
stant as soon as the knurled nut
(checknut) is tightened in position.
Emptying the dirt hopper
To lift the dirt hopper, just use the
handle provided.
Insert the dirt hopper
Locate the hopper on the forward
frame as shown, and slue down.
Note: Do not place the dirt hopper
flat on ground to avoid damage to the
rubber lip. Use the four feet for sto-
ring the detached hopper.
9