Russell Hobbs 21200-56 Instructions And Warranty page 4

Aura hand & stand mixer
Hide thumbs Also See for 21200-56:
Table of Contents

Advertisement

24. Do not operate this appliance by means of an external timer or remote control system.
25. DO NOT carry any appliance by the power cord.
26. Do not leave this appliance unattended during use. Always unplug the unit when not in use
or before cleaning.
27. Always operate the appliance on a smooth, even, stable surface. Do not place the unit on a
hot surface.
28. Ensure both beaters/ whisks/ hooks are fitted to the appliance before use.
29. Never attempt to eject the beaters/ whisks/ hooks when the appliance is in operation.
30. Never touch the rotating tools while still in motion; always wait for them to come to a
complete stop.
31. It is absolutely necessary to keep this appliance clean at all times as it comes into direct
contact with food.
32. To avoid splashes, always put the beaters/ whisks/ hooks deep into the mixture before
running. Begin mixing at a low speed.
33. Be careful when mixing hot liquids or food preparation.
34. Ensure that the switch is in the "0" / "Off" position after each use.
35. To avoid the danger of fire and/or explosion, do not use this mixer to stir paints or solvents.
36. The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
37. In case of technical problems, switch off the machine and do not attempt to repair it
yourself. Return the hand mixer to an authorised service facility for examination, adjustment
or repair. Always insist on the use of original spare parts. Failure to comply with the above
mentioned pre-cautions and instructions, could affect the safe operation of this machine.
NOTICE: This appliance is not for professional use. You should follow the requested breaks.
Failure to follow this instruction carefully may result in damage to the motor. When using the
appliance, the unit must not be used for longer than 3 minute cycles, as this puts pressure on the
motor which could lead to overheating and product malfunction. It is recommended to allow the
appliance a 3 minute break after each cycle. This will also help to prolong the life of your
appliance.

Advertisement

Table of Contents
loading

Table of Contents