Care And Use Instructions - Kinesia HomeView User Manual

Kinesia HomeView User's Guide – 01/03/2013

Care and Use Instructions

When transporting Kinesia HomeView, ensure all components are secured in the travel case to
prevent damage.
It is not recommended to store Kinesia HomeView in very hot or cold temperatures. If the system
has been stored in an environment lower than 50°F or higher than 90°F, wait at least two hours for
the system to return to room temperature before it is turned on.
Do not expose the system to liquid or excessive moisture to prevent mechanical or electrical
damage.
Note: to prevent the possibility of cross contamination and to maintain hygienic safety, a
throughout cleaning/disinfecting of the Finger Sensor, Tablet PC and Charging Pad is
required after each patient use.
Use only the following products to safely clean and disinfect the Finger Sensor, Tablet PC and
Charging Pad:
• Dimethyl benzyl ammonium chloride 0.3 % maximum concentration (i.e. germicidal
disposable wipes)
• Alcohol-free glass cleaning fluids
• Water with mild (neutral pH) soap solutions (do not submerge any equipment, wipe down
with damp cloth)
• Dry microfiber cleaning cloth or chamois cloth without oil)
• Static-free cloth wipes
Avoid strong solvents such as alcohol wipes, acetone, ammonium chloride, methylene chloride
and hydrocarbons which can permanently damage the surface of the Finger Sensor, Tablet PC
and Charging Pad.
Avoid fibrous material such as paper towels which can scratch the Tablet's touch screen.
Refer to the HP Tablet User's Guide, available at
http://bizsupport2.austin.hp.com/bc/docs/support/supportmanual/c03112061/c03112061.pdf, for
further cleaning and disinfecting instructions.
7