Clinician-Guided Demo Mode - Homeview Usb Flash Drive - Kinesia HomeView User Manual

Kinesia HomeView User's Guide – 01/03/2013
Clinician-Guided Demo Mode – HOMEVIEW USB Flash Drive
Demo mode can be used to guide patients through their study in the clinic before they are sent
home with Kinesia HomeView. Demo mode allows patients to practice the prescribed tests without
saving any data. To use demo mode, the new study definition must first be transferred to the
Tablet PC. To access demo mode:
• Plug the HOMEVIEW USB flash drive into the Tablet PC, click the 'Set Demo Mode' button
on the Administration Options screen. Remove the HOMEVIEW USB flash drive from the
Tablet PC. 'Demo Mode' is displayed on the lower left corner of the Tablet PC software.
Click 'my Tests' for the patient to practice the prescribed tests. To exit demo mode, turn off the
Tablet PC by holding down the power button. The newly created study definition that was uploaded
to the patient station will remain on the Tablet PC for home use after demo mode has been exited.
NOTE: Turning off the Tablet PC during demo mode will cause the patient application to return to
the default mode upon startup.
23