Kinesia HomeView User's Guide – 01/03/2013
Chapter 6: Broadband Programming and Data Transfer
Setting the SIM card PIN
If the SIM card you use for mobile broadband requires a PIN and/or PUK to be set up on the
Kinesia HomeView Tablet PC, complete the following steps:
1. Click the Administration Options Button on the Tablet PC.
2. Enter the administrative login password.
3. Click Proceed.
4. On the Administration Options panel, select the option to configure your SIM.
5. Enter the SIM PIN and PUK. This information can be found on the insert that comes with
your SIM card.
6. Click Apply. A message will appear that indicates your settings are saved.
7. Click Close. You are returned to the main Kinesia HomeView screen.
NOTE: You may need to reboot the Kinesia HomeView Tablet PC after changing the PIN and PUK
values for the SIM card for mobile broadband to connect.
Toggling Remote Upload
You can manually select to utilize mobile broadband or USB uploads. To toggle between the two:
1. Click the Administration Options Button on the Tablet PC and enter the administrative login
password and click 'Proceed'. An 'Administration Options' screen will appear (Figure 6).
2. Press the 'Network' tab, then 'Toggle Network Connection' button.
• When remote upload is enabled, there will be a white '3G' marker in the upper right side
of the HomeView main screen with two arrows on the upper left side.
• When remote upload is disabled, the '3G' marker and arrows on the top of the main
screen will not be displayed.
24