Table of Contents
Advertisement
2-2-8 Chipset Configuration
Restore on AC Power Loss
Defines the power state to resume to after a system shutdown that is due to an interruption in AC power.
When set to Last State, the system will return to the active power state prior to shutdown. When set to
Stay Off, the system remains off after power shutdown.
Options available: Last State/Stay Off/Power On. The default setting depends on the BMC setting.
Deep Sleep (EuP)
Enable/Disable Deep Sleep mode.
Options available: Enabled/Disabled. Default setting is Disabled.
Fan Curve Mode
Configure ystem fan curve mode
Options available: Full Dpeed Mode/Performance ModeBalanced mode/Energy Saving Mode.
Default setting is Performance Mode.
Chassis Opened Warning
Enable/Disable Chassis intrusion alter funtion.
Options available: Enabled/Disabled. Default setting is Enabled.
(Note)
When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.
(Note)
- 57 -
BIOS Setup
Advertisement
Table of Contents
