Table of Contents
Advertisement
3) SATA0/SATA1/SATA2/SATA3/SATA4/SATA5 (SATA 6Gb/s Connectors
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and
1.5Gb/s standard. Each SATA connector supports a single SATA device.
SATA4 SATA2 SATA0
SATA5 SATA3 SATA1
• A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives
are configured, the total number of hard drives must be an even number.
• A RAID 10 configuration requires four hard drives.
(Note) When a RAID configuration is built across the SATA 6Gb/s channels, the system performance of
the RAID configuration may vary depends on the devices are connected.
4) PMBUS (PMBus connector)
- 25 -
7
1
Pin No. Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
5
1
Pin No. Definition
1
PMBus CLK
2
PMBus DATA
3
PMBus Alert
4
GND
5
3.3V Sense
Hardware Installation
Advertisement
Table of Contents
