Table of Contents
Advertisement
Link
Speed LED
Activity LED
SFP+ LAN Port
1000/10G LAN Port
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Hardware Installation
SFP+ Speed LED:
State
Description
Green On
10 Gbps data rate
Green Blink
Identify 10 Gbps data
rate
Yellow On
1 Gbps data rate
Yellow Blink
Identif y 1 Gbps data
rate
Off
100 Mbps data rate
Link/Activity LED:
State
Description
On
Link bet ween system and net work or no
access
Blinking Data transmission or receiving is occurring
Off
No data transmission or receiving is occurring
- 22 -
Advertisement
Table of Contents
