Installing A Memory; Dimm Population Table - Gigabyte MH70-HD0 User Manual

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR3 DIMMs on this motherboard.
Installation Step:
Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Note: For dual-channel operation, DIMMs must be installed in matched pairs.
Step 3. Reverse the installation steps when you wish to remove the DIMM module.

1-4-3 DIMM Population Table

Two Slots Channel RDIMM Population Configuration Within a Channel
Type
RDIMM
RDIMM
RDIMM
RDIMM
LRDIMM
Hardware Installation
2
Slot Per Channel (SPC) and DIMM Per Channel (DPC)
Ranks Per
DIMM and
Data Width
1 Slot Per Channel
1DPC
SRx4
2133
SRx8
2133
2133
DRx8
DRx4
2133
QRx4
2133
1
2
Speed (MT/s);
2 Slot Per Channel
1DPC
2133
2133
2133
2133
2133
- 19 -
2DPC
1866
1866
1866
1866
2133